Sika Tile Grout Cementitious Tile Joint Filler 1kg

Sika Tile Grout Cementitious Tile Joint Filler 1kg

A one-component, pre-packed cementitious tile grout made with selected pigments and admixtures. Its non-sag consistency helps fill floor and wall tile joints for an even, coordinated finish in interior and exterior applications.

Product Features

• Non-shrink formulation designed to help prevent cracking.
• Thixotropic, non-sag consistency suitable for wall joints.
• Consistent colour quality.
• Mix with water for dry areas or SikaCim Latex for wet areas, following the applicable product instructions.

Specifications

• Brand and product: Sika Tile Grout
• Type: One-component cementitious tile grout
• Composition: Cement, selected pigments and admixtures
• Pack size: 1kg bag
• Listing options: Gray, Cool White, Beige and Charcoal Black
• Mixed density: Approximately 1.9 kg/L
• Pot life: Approximately 1 hour
• Foot traffic: Minimum 24 hours after application
• Shelf life: 9 months from production in original sealed packaging
• Storage: Dry conditions between +5°C and +30°C

Application

• Filling joints between homogeneous tiles, ceramic tiles, marble, granite, mosaics and natural stone.
• Floor and wall applications.
• Interior and exterior use.
• Dry and wet areas. The existing listing specifies SikaCim Latex in place of water for wet-area mixing.

How to Use

1. For dry areas, place 0.3L of clean water in a suitable mixing vessel for each 1kg of grout.
2. For wet areas, the existing listing specifies replacing the water with 0.3L of SikaCim Latex per 1kg of grout. Confirm compatibility and dosage against the current manufacturer instructions.
3. Slowly add the grout and mix for approximately 3 minutes using a slow-speed mixer at 300–600 rpm until smooth and lump-free.
4. Apply diagonally across the tile joints using a rubber trowel, pressing firmly to fill the joints completely.
5. Allow approximately 10 minutes to set, then remove excess grout using a damp sponge. Finish joints to a consistent, even depth.
6. Allow at least 24 hours before foot traffic. Listed application air temperature is +15°C to +40°C.

What's in the Box

One 1kg bag of Sika Tile Grout in the selected colour. The existing listing also identifies 25kg outer-box packaging; an individual colour option does not include a full box. SikaCim Latex, mixing equipment and application tools are not listed as included.

Technical Information

• Mixing quantity: 0.3L liquid per 1kg grout. The existing listing also gives a liquid-to-powder ratio of 1:2.5 by volume.
• Indicative consumption for 200 × 200 × 6mm tiles: 0.48 kg/m² at 1mm joints; 1.44 kg/m² at 3mm joints.
• Indicative consumption for 300 × 300 × 6mm tiles: 0.36 kg/m² at 1mm joints; 1.08 kg/m² at 3mm joints.
• Indicative consumption for 400 × 400 × 6mm tiles: 0.24 kg/m² at 1mm joints; 0.72 kg/m² at 3mm joints.
• Indicative consumption for 600 × 600 × 10mm tiles: 0.20 kg/m² at 1mm joints; 0.60 kg/m² at 3mm joints.

Consumption figures are retained from the existing listing and are estimates, not guaranteed coverage. Confirm quantities and application requirements against the current Sika Product Data Sheet before planning the installation.