Dry Diamond Disc 180mm

The JADEVER JDDC1K04 is a 180mm (7") segmented dry diamond disc with a 22.2mm bore and 7.5mm blade width, certified to EN 13236. Designed for fast cutting of concrete, stone, brick, and masonry in both dry and wet conditions, it delivers clean, precise cuts with minimal chipping.

Specifications

Product Features

• Segmented diamond rim for fast, aggressive cutting in concrete, stone, brick, and masonry
• Suitable for both dry and wet cutting applications
• 7.5mm blade width for stable, straight cuts with minimal deviation
• 22.2mm bore fits standard angle grinders and cut-off saws
• EN 13236 certified for safety and performance compliance
• Max 8,500 RPM for use with 180mm angle grinders
• Ideal for construction, tiling, landscaping, and general masonry cutting

Wire Brush Set 3 Pcs

Hex shank wire brush set for power drills combining a wire wheel brush, cup brush, and wire end brush. Covers flat surfaces, contoured areas, and tight holes for deburring, descaling, paint stripping, and weld seam cleaning.

Specifications

What's in the Box

• 1× Wire Wheel Brush with Hex Shank, 2"
• 1× Cup Brush with Hex Shank, 2"
• 1× Wire End Brush (Pencil) with Hex Shank, 1"

Materials & Care

• Steel wire bristles with secure hex shanks for reliable performance
• Always wear eye protection and gloves when operating
• Ensure each shank is fully secured in the chuck before use
• Inspect bristles for wear before each use; store in a dry environment

Wire Brush 250mm

Sturdy 250mm hand wire brush for cleaning, deburring, rust removal, and surface preparation on metal, wood, and masonry surfaces.

Specifications

What's in the Box

• 1× TOTAL Wire Brush 250mm (THT92102)

Materials & Care

• Steel wire bristles for effective scrubbing and surface cleaning
• Wear gloves when using to protect hands from wire bristles
• Rinse and dry after use to prevent rust on bristles
• Store in a dry environment; replace when bristles become bent or worn

Pencil Wire Brush 1"

1" wire end brush (pencil brush) with a 1/4" hex shank for power drills, rated at 4500 RPM. Narrow cylindrical profile ideal for cleaning, deburring, and descaling in holes, grooves, pipes, and other hard-to-reach areas.

Specifications

What's in the Box

• 1× TOTAL Pencil Wire Brush 1" (TAC37011)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Wheel Brush 4"

4" (100mm) wire wheel brush with a 1/4" hex shank for power drills, rated at 4500 RPM. Wide surface coverage for efficient planing, deburring, descaling, paint stripping, and weld seam cleaning.

Specifications

What's in the Box

• 1× TOTAL Wire Wheel Brush 4" (TAC34041)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Wheel Brush 3"

3" (75mm) wire wheel brush with a 1/4" hex shank for power drills, rated at 4500 RPM. 0.3mm × 16mm wire diameter for effective planing, deburring, descaling, and weld seam cleaning.

Specifications

What's in the Box

• 1× TOTAL Wire Wheel Brush 3" (TAC34031)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Wheel Brush 2"

2" (50mm) wire wheel brush with a 1/4" hex shank for power drills, rated at 4500 RPM. 0.3mm × 10mm wire diameter for planing, deburring, descaling, and weld seam cleaning in tight spots and detailed work.

Specifications

What's in the Box

• 1× TOTAL Wire Wheel Brush 2" (TAC34021)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Cup Brush 3"

3" (75mm) wire cup brush with a 1/4" hex shank for power drills and drill presses, rated at 4500 RPM. Ideal for planing, deburring, descaling, and weld seam cleaning in areas where an angle grinder won't reach.

Specifications

What's in the Box

• 1× TOTAL Wire Cup Brush 3" (TAC33031)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Cup Brush 2"

2" (50mm) wire cup brush with a 1/4" hex shank for power drills and drill presses, rated at 4500 RPM. 0.3mm × 17mm wire diameter for planing, deburring, descaling, and weld seam cleaning in tight spaces where an angle grinder won't fit.

Specifications

What's in the Box

• 1× TOTAL Wire Cup Brush 2" (TAC33021)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Cup Brush 5"

Professional 5" (125mm) wire cup brush for angle grinders with M14×2 spindle thread, rated at 6500 RPM. 0.3mm wire diameter and 30mm wire length for effective planing, deburring, descaling, and weld seam cleaning on steel, cast steel, and wood.

Specifications

What's in the Box

• 1× TOTAL Wire Cup Brush 5" (TAC31051)

Materials & Care

• Steel wire bristles for aggressive, long-lasting performance on metal and wood
• Always wear eye protection and gloves when operating
• Do not exceed the rated 6500 RPM speed
• Ensure the M14×2 thread is fully secured before use
• Store in a dry environment to prevent rust on bristles

Wire Cup Brush 4"

Professional 4" (100mm) wire cup brush for angle grinders with M14 spindle thread. Ideal for planing, deburring, descaling, paint stripping, and weld seam cleaning on metal surfaces.

Specifications

What's in the Box

• 1× TOTAL Wire Cup Brush 4" (TAC31041)

Materials & Care

• Steel wire bristles for aggressive, long-lasting performance on metal surfaces
• Always wear eye protection and gloves when operating
• Ensure the M14 thread is fully secured before use
• Inspect bristles for wear before each use; store in a dry environment

Wire Cup Brush 3" M10

Professional 3" (75mm) wire cup brush with nut for angle grinders, M10×1.5 spindle thread, rated at 12500 RPM. 0.3mm × 23mm wire diameter for powerful planing, deburring, descaling, and weld seam cleaning on metal surfaces.

Specifications

What's in the Box

• 1× TOTAL Wire Cup Brush 3" M10 with Nut (TAC31031.2)

Materials & Care

• Steel wire bristles for aggressive, long-lasting performance on metal surfaces
• Always wear eye protection and gloves when operating
• Do not exceed the rated 12500 RPM speed
• Ensure the M10×1.5 thread is fully secured before use
• Store in a dry environment to prevent rust on bristles

Wire Wheel 5"

Professional 5" (125mm) wire wheel for angle grinders, rated at 4500 RPM. 0.3mm line diameter and 35mm total line length for effective planing, deburring, descaling, and weld seam cleaning on metal surfaces.

Specifications

What's in the Box

• 1× TOTAL Wire Wheel 5" (TAC36051)

Materials & Care

• Steel wire bristles for long-lasting performance on metal surfaces
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Inspect bristles for wear before each use; store in a dry environment

Grind, shape, and surface concrete, stone, and masonry with precision using the TAC2411251 Segmented Turbo Cup Grinding Wheel. This 125mm cup wheel features a segmented turbo design for aggressive material removal with efficient dust evacuation — ideal for surface preparation, levelling, and edge grinding on hard materials.

Specifications

• Model: TAC2411251
• Diameter: 125mm
• Blade Width: 20mm
• Arbor: 22.22mm
• Packaging: Color box

Product Details

• Designed for use with 125mm (5") angle grinders
• Segmented turbo design – aggressive grinding with efficient dust and debris removal between segments
• 22.22mm arbor – standard fit for most 125mm angle grinders
• Suitable for surface preparation, levelling, edge grinding, and material removal on concrete, stone, brick, and masonry
• 20mm blade width for stable, controlled grinding contact

Materials & Care

• Segment: Diamond (segmented turbo)
• Store in a cool, dry place away from moisture and direct sunlight
• Inspect wheel for cracks or damage before each use – do not use damaged wheels
• Always use appropriate PPE (eye protection, gloves, face shield, dust mask) when grinding
• Do not exceed the grinder's maximum rated speed

Cut through concrete, brick, stone, and tile with power and precision using the TAC2111803 Dry Diamond Disc. At 180mm (7"), this large-format diamond disc is built for heavy-duty cutting tasks on 7" angle grinders, delivering fast, clean results on demanding job sites. Packed in a color box for easy identification and storage.

Specifications

• Model: TAC2111803
• Size: 180mm (7") × 22mm
• Blade Width: 7.5mm
• UPC: 6925582161199
• Weight: 0.36 kg
• Packaging: Color box

Product Details

• Designed for use with 180mm (7") angle grinders
• 7.5mm blade width – efficient material removal for fast cutting performance
• 22mm bore – standard fit for most 180mm angle grinders
• Suitable for cutting concrete, brick, stone, and tile
• Dry cut design – no water required for everyday cutting tasks

Materials & Care

• Segment: Diamond
• Store in a cool, dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield, dust mask) when cutting
• Do not exceed the grinder's maximum rated speed

Cut precise channels through concrete, brick, and stone with the TAC2111253 Diamond Cutting Disc. This 125mm universal fast-cut disc supports both wet and dry cutting at up to 12,200 RPM, and is specifically designed for use with the TOTAL TWLC1256 Wall Chaser — making it the ideal blade for electrical conduit routing, pipe chasing, and wall groove work.

Specifications

• Model: TAC2111253
• Size: 125mm × 22mm
• Blade Width: 10mm
• Max. Speed: 12,200 RPM
• Cut Type: Wet and Dry
• Application: Universal, Fast Cut
• Compatible Tool: TOTAL TWLC1256 Wall Chaser

Product Details

• Designed for use with the TOTAL TWLC1256 Wall Chaser
• Universal fast cut design – aggressive, efficient cutting through concrete, brick, and stone
• Wet and dry cutting – versatile use with or without water cooling
• 22mm bore – standard fit for 125mm wall chasers and angle grinders
• Max. speed 12,200 RPM – always verify tool speed compatibility before use

Materials & Care

• Segment: Diamond (universal segmented)
• For wet cutting, always use with water to prevent overheating and extend blade life
• Store in a dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield, dust mask) when cutting
• Do not exceed the maximum rated speed of 12,200 RPM

Stock up for the job site with the TAC2111003M Dry Diamond Disc Set. This 10-piece set of 100mm universal segmented diamond discs delivers fast, aggressive cutting on tile, stone, concrete, and brick — wet or dry. Packed in a durable metal box for easy storage and transport on site.

Specifications

• Model: TAC2111003M
• Set: 10 pcs
• Disc Diameter: 100mm (4")
• Bore: 16mm (5/8")
• Blade Length: 7.5mm
• Cut Type: Wet and Dry
• Application: Universal segmented, Fast Cut
• Packaging: Metal box

Product Details

• Designed for use with 100mm (4") angle grinders
• Universal segmented design – fast, aggressive cutting on tile, stone, concrete, and brick
• Fast cut performance – 7.5mm blade length for efficient material removal
• Wet and dry cutting – versatile use with or without water cooling
• 16mm (5/8") bore – standard fit for most 100mm angle grinders
• 10-piece set in metal box – great value, protected storage for job site use

Materials & Care

• Segment: Diamond (universal segmented)
• For wet cutting, always use with water to prevent overheating and extend blade life
• Store in the included metal box in a dry place
• Inspect each disc for cracks or damage before use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting

Tackle any hard material cutting job with the TAC2131003 Diamond Cutting Disc. This 100mm universal turbo disc supports both wet and dry cutting, delivering clean, fast cuts through tile, stone, concrete, brick, and more. With a max speed of 15,300 RPM, it's ready to perform on any compatible 4" angle grinder.

Specifications

• Model: TAC2131003
• Disc Diameter: 4" (100mm)
• Size: 100mm × 16mm
• Max. Speed: 15,300 RPM
• Cut Type: Wet and Dry
• Application: Universal turbo, Clean Cut

Product Details

• Designed for use with 100mm (4") angle grinders
• Universal turbo segment – aggressive cutting with clean finish on a wide range of hard materials
• Wet and dry cutting – versatile use with or without water cooling
• Clean cut design – minimises chipping and edge breakout on tile, stone, and concrete
• Max. speed 15,300 RPM – always verify grinder speed compatibility before use

Materials & Care

• Segment: Diamond (universal turbo)
• For wet cutting, always use with water to prevent overheating and extend blade life
• Store in a dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the maximum rated speed of 15,300 RPM

Cut through marble, granite, tile, stone, brick, and concrete with exceptional smoothness using the TAC2151051 Ultrathin Diamond Disc. Featuring a special plastic flange for vibration-free operation, a reinforced matrix for superior cutting effect, and an ultra-thin 0.9mm matrix thickness for maximum efficiency — this disc is built for professionals who demand clean results every time.

Specifications

• Model: TAC2151051
• Size: 105mm (4") × 16mm
• Blade Width: 10mm
• Blade Thickness: 1.5mm
• Matrix Thickness: 0.9mm
• Material: 75Cr1
• Application: Marble, granite, bricks, stone, concrete, tile

Product Details

• Special plastic flange – ensures smooth, stable cutting with reduced vibration
• Reinforced matrix – delivers excellent cutting effect and longer segment life
• 0.9mm ultrathin matrix – higher efficiency with minimal material loss
• 75Cr1 steel body – high-quality chromium steel for durability and blade stability
• Compatible with 105mm (4") lithium-ion angle grinders
• Suitable for marble, granite, bricks, stone, concrete, and tile

Materials & Care

• Body Material: 75Cr1 (Chromium Steel)
• Segment: Diamond (reinforced matrix)
• Store in a dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the grinder's maximum rated speed

Slice through marble, granite, bricks, stone, and concrete with ease using the TAC061051 Ultrathin Diamond Disc. At just 0.9mm matrix thickness, this 105mm disc is engineered for clean, precise cuts with minimal material loss — perfect for tiling, stone finishing, and masonry work. Compatible with lithium-ion angle grinders for cordless convenience on the job site.

Specifications

• Model: TAC061051
• Size: 105mm (4") × 16mm
• Blade Width: 10mm
• Blade Thickness: 1.6mm
• Matrix Thickness: 0.9mm
• Material: 75Cr1
• Application: Marble, granite, bricks, stone, concrete
• Packaging: Color box

Product Details

• Designed for use with 105mm (4") angle grinders, including lithium-ion cordless models
• 0.9mm ultrathin matrix – minimises material loss and reduces chipping for cleaner cuts
• 75Cr1 steel body – high-quality chrome steel for durability and blade stability
• 16mm bore – standard fit for most 105mm angle grinders
• Suitable for cutting marble, granite, bricks, stone, and concrete

Materials & Care

• Body Material: 75Cr1 (Chromium Steel)
• Segment: Diamond
• Store in a dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the grinder's maximum rated speed

Cut through tile, marble, and brick with precision using the TAC2131051HT Ultrathin Diamond Disc. At just 1.0mm thick, this 105mm wet cut disc delivers clean, chip-free edges on a wide range of hard materials — making it the go-to blade for tiling, stone work, and masonry finishing.

Note: Not intended for use on vitrified brick (nano glass).

Specifications

• Model: TAC2131051HT
• Size: 105mm (4") × 20mm
• Blade Length: 10mm
• Thickness: 1.0mm
• Max. Speed: 15,300 RPM
• Cut Type: Wet Cut
• Application: Universal purpose – tile, marble, brick

Product Details

• Designed for use with 105mm (4") angle grinders
• 1.0mm ultrathin profile – minimises material loss and reduces chipping for cleaner cuts
• Wet cut design – use with water for cooler cutting and longer blade life
• Diamond segment – universal purpose for tile, marble, and brick
• Max. speed 15,300 RPM – always verify grinder speed compatibility before use
• Not suitable for vitrified brick (nano glass)

Materials & Care

• Segment: Diamond
• Always use with water (wet cut) to prevent overheating and extend blade life
• Store in a dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the maximum rated speed of 15,300 RPM

Keep your crew cutting all day with the TAC22110550 Abrasive Metal Cutting Disc Set. This bulk 50-piece set of 105mm ultra-thin cutting discs is the smart choice for high-volume metalwork — pipes, rebar, sheet metal, angle iron, and more. At just 1.2mm thick, each disc delivers fast, clean cuts with minimal material loss and heat buildup.

Specifications

• Model: TAC22110550
• Set: 50 pcs
• Disc Diameter: 105mm
• Bore: 16mm
• Thickness: 1.2mm
• Application: Metal

Product Details

• Designed for use with 105mm (4") angle grinders
• 1.2mm ultra-thin profile – minimises material loss and reduces heat for cleaner cuts
• 16mm bore – standard fit for most 105mm angle grinders
• Suitable for cutting pipes, rebar, sheet metal, angle iron, and other metal materials
• 50-piece bulk set – ideal for job sites, workshops, and high-volume cutting tasks

Materials & Care

• Application Material: Metal
• Store in a cool, dry place away from moisture and direct sunlight
• Inspect each disc for cracks or damage before use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the grinder's maximum rated speed

Stock up and keep cutting with the TAC2211005 Abrasive Metal Cutting Disc Set. This 10-piece set of 105mm ultra-thin cutting discs is built for fast, clean cuts through metal — pipes, rebar, sheet metal, angle iron, and more. At just 1.2mm thick, each disc minimises material loss and heat buildup for precise, efficient cuts every time.

Specifications

• Model: TAC2211005
• Set: 10 pcs
• Disc Diameter: 105mm
• Bore: 16mm
• Thickness: 1.2mm
• Application: Metal

Product Details

• Designed for use with 105mm (4") angle grinders
• 1.2mm ultra-thin profile – minimises material loss and reduces heat for cleaner cuts
• 16mm bore – standard fit for most 105mm angle grinders
• Suitable for cutting pipes, rebar, sheet metal, angle iron, and other metal materials
• 10-piece set – great value, always have a disc ready on the job

Materials & Care

• Application Material: Metal
• Store in a cool, dry place away from moisture and direct sunlight
• Inspect each disc for cracks or damage before use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the grinder's maximum rated speed

Make fast, clean cuts through metal and stainless steel (INOX) with the TAC2213551 Abrasive Metal Cutting Disc. At 355mm (14"), this heavy-duty disc is built for chop saws, tackling thick steel profiles, pipes, rebar, and structural sections with ease. The flat centre with double fibre layer construction ensures strength and stability under load.

Specifications

• Model: TAC2213551
• Disc Diameter: 355mm (14")
• Bore: 25.4mm (1")
• Thickness: 3.0mm (1/8")
• Application: Metal and INOX (Stainless Steel)

Product Details

• Designed for use with 355mm (14") chop saws
• Flat centre with double fibre layer – reinforced construction for strength and stability under cutting load
• 25.4mm (1") bore – standard fit for 14" chop saws
• Suitable for cutting metal and INOX (stainless steel) – pipes, profiles, rebar, and structural sections
• 3.0mm thickness balances durability with efficient material removal

Materials & Care

• Application Material: Metal & INOX (Stainless Steel)
• Store in a cool, dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the machine's maximum rated speed