Anchoring Adhesive 300ml Sika AnchorFix-2+ Tropical

Anchoring Adhesive 300ml Sika AnchorFix-2+ Tropical

A solvent- and styrene-free, two-component epoxy acrylate anchoring adhesive for medium to high loads in hot and tropical conditions. The fast-curing, non-sag formula suits vertical and overhead applications and works with standard dispensing guns.

Product Features

• Formulated for tropical and high-temperature environments.
• Two-component epoxy acrylate adhesive for chemical anchoring.
• Solvent and styrene free.
• Non-sag consistency, including overhead applications.
• Compatible with standard dispensing guns.
• Designed for medium to high load applications.

Specifications

• Brand: Sika
• Model: AnchorFix-2+ Tropical
• Type: Two-component epoxy acrylate anchoring adhesive
• Packaging: 300 ml cartridge, 490 g combined components A+B
• Mixed colour: Grey
• Sag flow: Non-sag, even overhead
• Material temperature: +15°C to +40°C
• Ambient temperature: +15°C to +40°C
• Substrate temperature: +15°C to +40°C
• Minimum cartridge temperature: +15°C

Application

For chemical anchoring of threaded rods and reinforcement bars in solid concrete and masonry. Intended for medium to high loads in hot and tropical climatic conditions. Anchor selection and installation must follow the current Sika technical instructions and project requirements.

How to Use

Use a compatible dispensing gun and follow the current Sika Product Data Sheet for hole dimensions, drilling, hole cleaning, adhesive dispensing, anchor insertion and curing. Keep the material, ambient air and substrate within the specified temperature range. Do not load the anchor until the required curing time for the actual installation conditions has elapsed.

What's in the Box

One 300 ml cartridge of Sika AnchorFix-2+ Tropical containing components A+B, combined content weight 490 g. Included accessories are not confirmed in the current listing.

Technical Information

The current listing states curing for loading can be as short as 40 minutes at +35°C to +40°C. Curing time depends on installation conditions; confirm the required time in the current Sika Product Data Sheet before applying a load. The adhesive is formulated to resist sagging in vertical and overhead applications.