Sealants for Construction & Renovation | ESE Mall Cambodia

	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

Roof repair tape packaging with roll and circular container on a blurred roof background.

Sika

(0)

From $9.80

Sika® MultiSeal AP

A self-adhesive, rubber modified bituminous sealing tape laminated with aluminium foil on the upper side. Designed for sealing and repairing water ingress on roofs and other building elements. Easy to apply at low temperatures with good adhesion to most substrates including bituminous surfaces. Can be over-painted after application.

Overview

Specifications

Property	Value
Type	Self-adhesive rubber modified bituminous tape with aluminium foil top
Thickness	~1.1 mm
Tensile Strength	>130 N/25 mm
Reaction to Fire	B2 (DIN 4102)
Service Temperature	−20°C to +80°C
Application Temperature	+5°C to +45°C (min. 3°C above dew point)
Shelf Life	72 months from date of production
Storage	Dry, cool, +5°C to +25°C, protected from direct sunlight

Packaging

Tape Width	Roll Length	Rolls per Box
10 cm	3 m	12
30 cm	3 m	4

Usage

Sealing and repairing water ingress on roofs
Sealing roof gutters, flashings, and junctions
Sealing around skylights, chimneys, and roof penetrations
Sealing joints on metal roofing and roof tiles
General waterproofing repairs on building elements

Advantages

Very easy to apply – self-adhering, no tools required
Good adhesion to many substrates
Weatherproof and durable
Compatible with bituminous substrates
Can be over-painted
Can be applied at low temperatures (down to +5°C)
Long shelf life – 72 months

Colour

Matt Grey
Terracotta

Product Details

Product Information

Property	Detail
Composition	Rubber modified bituminous tape with aluminium foil laminate
Thickness	~1.1 mm
Shelf Life	72 months from date of production
Storage Conditions	Dry, cool, +5°C to +25°C, protected from direct sunlight

Application

Application Information

Parameter	Value
Ambient Temperature	+5°C to +45°C (min. 3°C above dew point)

Application Steps

Substrate Preparation: Surface must be clean, dry, and free from dust, dirt, grease, oil, and loose particles. Remove any old sealant residues or poorly adhering coatings. For best results on porous substrates, ensure the surface is sound and firm.
Cutting: Cut the tape to the required length using scissors or a sharp knife.
Application: Peel back the release liner from the underside of the tape. Press the tape firmly onto the substrate, starting from one end and working progressively to avoid air bubbles. Apply firm hand pressure or use a roller to ensure full contact and adhesion.
Overlaps: Where overlapping is required, overlap by a minimum of 50 mm. Press overlaps firmly to ensure a watertight seal.
Overpainting: The tape can be over-painted with most conventional paint systems once applied.
Low Temperature Application: At low temperatures, warm the tape slightly before application to improve flexibility and adhesion.

In Stock (10 available)

Sika

Sika SikaSeal-128

(0)

$2.80

SikaSeal®-128

A 1-component, non-corrosive neutral silicone sealant for indoor and outdoor use. Primerless adhesion to glass, metals, aluminium, wood, ceramic tiles, and painted surfaces. High elasticity with ±25% movement capability, low odour, and excellent UV and weathering resistance.

Overview

Specifications

Property	Basic Colours	Transparent	Standard
Chemical Base	Neutral silicone		–
Density	~1.45–1.55 kg/L	~0.95–1.05 kg/L	ISO 1183-1
Shore A Hardness	~30–50	~20–30	ISO 868
Tensile Strength	~1.0 MPa	~0.5 MPa	ISO 8339
Elastic Recovery	>80%		ISO 7389
Movement Capability	±25%	±20%	ASTM C719
Elongation at Break	≥250%	≥200%	ISO 37
Service Temperature	−40°C min / +150°C max		–
Skin Time	~15 minutes	~5 minutes	CQP 019-1 at +23°C/50% r.h.
Curing Rate	~3 mm / 24 hours		CQP 049-2 at +23°C/50% r.h.
Shelf Life	12 months from date of production		–
Storage	Dry, upside down, below +27°C, away from direct sunlight		–

Usage

Weatherproof joints between glass, metals, painted surfaces, aluminium, wood, and ceramic tiles
Window and door installation
Tile perimeter joints
General joint sealing – interior and exterior

Advantages

Good UV and weathering resistance
Primerless adhesion to a wide range of substrates
High elasticity and flexibility (±25% movement capability)
Low odour, neutral curing
Non-corrosive – safe for use with metals

Packaging

~280 ml (420 g) cartridge – basic colours (12 per box)
~280 ml (280 g) cartridge – transparent
~600 ml (900 g) sausage – basic colours (20 per box)
~600 ml (600 g) sausage – transparent (20 per box)

Colour

White, Transparent, Grey, Black (others on request)

Important – Do NOT Use On

Alkaline surfaces such as concrete, plaster, and masonry
Bituminous substrates, natural rubber, or EPDM rubber
Natural stone, marble, or granite (bleeding may occur)
Joints in and around swimming pools
Joints under water pressure or permanent water immersion
Totally confined spaces (requires atmospheric moisture to cure)
Structural glazing or insulated glazing / food contact applications

Product Details

Product Information

Property	Detail
Composition	Neutral silicone (1-component)
Shelf Life	12 months from date of production
Storage Conditions	Dry, upside down, below +27°C, protected from direct sunlight

Technical Information – Consumption Guide

Joint Width (mm)	Joint Depth (mm)	Joint Length per 300 ml
6	4	~12.5 m
9	5	~6.5 m
12	6	~4 m
20	10	~1.5 m

Joint Design

For joints ≥10 mm and ≤20 mm wide: recommended joint depth of 10 mm
For larger joints, contact Sika Technical Service Department

Application

Application Information

Parameter	Value
Ambient Temperature	+5°C min / +40°C max (min. 3°C above dew point)
Substrate Temperature	+5°C min / +40°C max (min. 3°C above dew point)
Skin Time (basic colours)	~15 minutes at +23°C / 50% r.h.
Skin Time (transparent)	~5 minutes at +23°C / 50% r.h.
Curing Rate	~3 mm / 24 hours at +23°C / 50% r.h.

Application Steps

Substrate Preparation: Surface must be sound, clean, dry, and free from dirt, oil, grease, old sealants, and poorly bonded coatings. Remove all dust and loose material. SikaSeal®-128 adheres without primers or activators on most substrates.
Priming – Non-Porous Substrates (for optimum adhesion): Aluminium, anodised aluminium, stainless steel, PVC, galvanised steel, powder-coated metals, glazed tiles: lightly abrade, clean, and pre-treat with Sika® Aktivator-205. Wait >15 min (<6 hours). Other metals (brass, titanium-zinc): apply Sika® Aktivator-205, wait >15 min, then prime with Sika® Primer-3 N. Wait >30 min (<8 hours). PVC: apply Sika® Primer-215, wait >30 min (<8 hours). Glass: clean with Isopropanol.
Priming – Porous Substrates: Prime with Sika® Primer-3 N by brush. Wait >30 min (<8 hours) before sealing.
Masking: Apply masking tape where neat joint lines are required. Remove within the skinning time after finishing.
Joint Backing: Insert a suitable backing rod to the required depth.
Application: SikaSeal®-128 is ready to use. Prepare the cartridge or foil pack, insert into the sealant gun, and fit the nozzle. Extrude into the joint ensuring full contact with joint sides. Avoid air entrapment.
Finishing: Immediately tool the sealant firmly against the joint sides for adequate adhesion and a smooth finish. Use a compatible tooling agent (water is suitable). Do not use solvent-based tooling products.
Cleaning: Clean tools immediately with Sika® Remover-208. Hardened material can only be removed mechanically. For skin cleaning, use Sika® Cleaning Wipes-100.

In Stock (15 available)

Sika

Sika Sikaflex-11 FC+

(0)

$6.89

Sikaflex®-11 FC+

A 1-part multipurpose elastic adhesive and joint sealant with excellent application properties. Bonds and seals most construction material substrates without surface pre-treatment. Suitable for interior and exterior use with ±35% movement capability and very low VOC emissions.

Overview

Specifications

Property	Value
Type	1-component i-Cure® polyurethane adhesive-sealant
Density	~1.35 kg/L (ISO 1138-1)
Shore A Hardness	~37 (after 28 days, ISO 868)
Tensile Strength	~1.5 N/mm² (ISO 37)
Secant Tensile Modulus	~0.60 N/mm² at 100% elongation (ISO 8339)
Elastic Recovery	~80% (ISO 7389)
Tear Propagation Resistance	~8.0 N/mm (ISO 34)
Movement Capability	±35% (ASTM C719)
Service Temperature	−40°C min / +80°C max
Skinning Time	~70 minutes at +23°C / 50% R.H.
Curing Rate	~3.5 mm / 24 hours at +23°C / 50% R.H.
Sag Flow	~1 mm (20 mm profile, +23°C, ISO 7390)
Shelf Life	15 months from date of production
Storage	Dry, +5°C to +25°C, original sealed packaging

Usage

Bonding construction components: concrete, masonry, reconstituted/cast stone, ceramic, wood, metal, glass
Sealing vertical and horizontal joints
Interior and exterior applications

Advantages

Movement capability of ±35% (ASTM C719)
Bonds well to most substrates without surface pre-treatment
Good mechanical and weathering resistance
Very low emissions – GEV-Emicode EC1PLUS, LEED v4 compliant, Class A+ (French VOC regulation)
CE marked per EN 15651-1 and EN 15651-4
IBU Environmental Product Declaration (EPD) available

Packaging

300 ml cartridge (12 cartridges per box)
600 ml cylindrical foil pack (20 foil packs per box)

Colour

White
Grey

Product Details

Product Information

Property	Detail
Composition	i-Cure technology polyurethane (1-component)
Certifications	CE marking EN 15651-1 & EN 15651-4; ASTM C920-11 Class 35; ISEGA Certificate No. 43792 U 16
Shelf Life	15 months from date of production
Storage Conditions	Dry, +5°C to +25°C, original sealed packaging
Density	~1.35 kg/L (ISO 1138-1)

Technical Information – Joint Design

Joint Distance (m)	Min. Joint Width (mm)	Min. Joint Depth (mm)
2	10	10
4	15	10
6	20	10
8	30	15
10	35	17

Technical Information – Yield (Sealing)

Joint Width (mm)	Joint Depth (mm)	Yield per 300ml Cartridge (m)	Yield per 600ml Foil Pack (m)
10	10	3.0	6.0
15	12	1.6	3.2
20	17	0.9	1.8
25	20	0.6	1.2
30	25	0.4	0.8

Application

Application Information

Parameter	Value
Ambient Temperature	+5°C min / +40°C max
Substrate Temperature	+5°C min / +40°C max (min. 3°C above dew point)
Skinning Time	~70 minutes at +23°C / 50% R.H.
Curing Rate	~3.5 mm / 24 hours at +23°C / 50% R.H.

Application Steps

Substrate Preparation: Surface must be sound, clean, dry, and free from dirt, oil, grease, cement laitance, old sealants, and poorly bonded coatings. Use wire brushing, grinding, or sanding to remove weak material. Remove all dust before application.
Priming – Non-Porous Substrates: Aluminium, anodised aluminium, stainless steel, PVC, galvanised steel, powder-coated metals, glazed tiles: lightly abrade, then apply Sika® Cleaner P or Sika® Aktivator-205 with a clean cloth. Wait >15 min (<6 hours) before bonding. Other metals (copper, brass, titanium-zinc): apply Sika® Cleaner P or Aktivator-205, wait >15 min, then prime with Sika® Primer-3 N. Wait >30 min (<8 hours). PVC: apply Sika® Primer-215, wait >15 min (<8 hours).
Priming – Porous Substrates: Concrete, aerated concrete, cement renders, bricks: prime with Sika® Primer-3 N by brush. Wait >30 min (<8 hours) before bonding/sealing.
Application: Insert backing rod if required. Cut nozzle to desired bead size. Apply sealant into joint ensuring full contact with adhesion area. Tool immediately for smooth finish. Use Sika® Tooling Agent N if required.
Cleaning: Clean tools immediately with Sika® Remover-208. For skin cleaning use Sika® Cleaning Wipes-100. Cured material can only be removed mechanically.

In Stock (10 available)

Sika

Sika Sikaflex-140 Construction

(0)

From $7.63

Sika Sikaflex-140 Construction

A 1-part polyurethane elastic joint sealant for durably sealing connection and movement joints in concrete and masonry facades. Bubble-free curing, ±25% movement capability, and excellent adhesion to most construction materials. LEED® v4 compliant.

Overview

Specifications

Property	Value
Type	1-component polyurethane elastic joint sealant
Density	(1.25 ± 0.1) kg/L (ISO 1183-1)
Shore A Hardness	35 (cured 28 days at +23°C / 50% R.H.)
Secant Tensile Modulus	0.30 N/mm² at 60% elongation (cured 28 days)
Elastic Recovery	70% at 100% elongation for 24 hours
Tear Propagation Resistance	6.0 N/mm (cured 7 days)
Elongation at Break	800% at −20°C (cured 7 days)
Movement Capability	±25% (ASTM C719)
Service Temperature	−40°C min / +70°C max
Skin Time	~120 minutes at +23°C / 50% R.H.
Tooling Time	~100 minutes at +23°C / 50% R.H.
Curing Rate	~2 mm / 24 hours at +23°C / 50% R.H.
Shelf Life	12 months from date of production
Storage	Dry, +5°C to +30°C, original sealed packaging

Usage

Interior and exterior joint sealing on building facades
Around window and door frames
Around precast and prefabricated elements
Floor and wall construction joints
General purpose construction sealant

Advantages

Easy to extrude and tool
Movement capability of ±25% (ASTM C719)
Good adhesion to many construction materials
Bubble-free curing
Can be overpainted with most conventional paint systems
LEED® v4 compliant – contributes to Indoor Environmental Quality (EQ) Credit: Low-Emitting Materials

Packaging

600 ml foil pack
Box of 20 foil packs

Colour

Grey
White

Product Details

Product Information

Property	Detail
Composition	Sika i-Cure® polyurethane (1-component)
Product Declaration	ASTM C920-18: Type S, Grade NS, Class 25, Use T1, NT, M
Shelf Life	12 months from date of production
Storage Conditions	Dry, +5°C to +30°C, original sealed packaging
Density	(1.25 ± 0.1) kg/L (ISO 1183-1)

Application

Application Information

Parameter	Value
Ambient Temperature	+5°C min / +40°C max
Substrate Temperature	+5°C min / +40°C max (min. 3°C above dew point)
Skin Time	~120 minutes at +23°C / 50% R.H.
Tooling Time	~100 minutes at +23°C / 50% R.H.
Curing Rate	~2 mm / 24 hours at +23°C / 50% R.H.

Application Steps

Substrate Preparation: Surface must be sound, clean, dry, and free from dirt, oil, grease, cement laitance, sealant residues, and poorly bonded coatings.
Priming – Non-Porous Substrates: Apply Sika® Aktivator-205. For other metals, follow with Sika® Primer-3 N. For PVC, use Sika® Primer-215.
Priming – Porous Substrates: Prime with Sika® Primer-3 N or Sika® Primer-115.
Application: Insert backing rod, apply sealant, and tool firmly against joint sides immediately using Sika® Tooling Agent N.
Overpainting: Allow full cure before overpainting. Test paint compatibility before full application.

In Stock (10 available)

Sika

Sika Boom AP

(0)

$8.93

Sika Boom AP

A 1-component, fast-curing polyurethane expanding foam for multi-position applications. Fixes, insulates, and fills connection joints around window and door frames, pipe entries, and vents in a single application. HFC-free and easy to apply with a nozzle in any position.

Overview

Specifications

Property	Value
Type	1-component polyurethane expanding foam
Density (cured)	~24 kg/m³
Thermal Conductivity	~0.030 W/mK (EN 12667)
Service Temperature	−40°C min / +90°C max
Tack Free Time	~10 minutes
Cutting Time	~30–60 minutes
Full Cure	24 hours
Shelf Life	12 months (opened cans: use within 4 weeks)
Storage	Upright, dry, +5°C to +25°C, away from direct sunlight

Usage

Fixing, insulating, and filling connection joints around window and door frames
Pipe entries, air conditioning vents, and roller blind housings
Insulation against noise, cold, and draughts in a single application

Advantages

1-component – ready to use
Multi-position foam – application in all positions including overhead
Easy application with nozzle
High expansion rate (~25L from 500ml can)
Fast curing – tack free in ~10 minutes
Very good thermal and sound insulation
Can be cut, sanded, and over-painted
HFC-free

Packaging

500 ml can (~25L yield)

Application

Application Steps

Substrate Preparation: Clean, sound surface free from oils and dust. Pre-dampen with water mist to ensure proper curing.
Application: Shake can well. Attach nozzle and fill joint to ~50% depth — foam will expand. Apply in all positions including overhead.
Cutting & Finishing: Allow ~30–60 minutes before cutting. Once cured, foam can be cut, sanded, and over-painted.
Cleaning: Clean tools immediately with Sika Boom Cleaner or Sika Remover-208. Cured material can only be removed mechanically.

In Stock (5 available)

Explore Related Collections

Sealants

Create durable, weatherproof seals on joints, gaps, and penetrations with our range of professional sealants. Suitable for construction, renovation, and maintenance applications across residential, commercial, and industrial projects in Cambodia.

Specifications

Category	Sealants
Use Case	Joint sealing, Gap filling, Weatherproofing, Bonding
Product Types	Silicone sealants, Polyurethane sealants, Acrylic sealants, Neutral cure sealants
Application	Concrete, Glass, Aluminium, Tile, Wood, Plastic

Product Features

Silicone sealants for permanent waterproof sealing on glass, aluminium, and sanitary fixtures
Polyurethane sealants for flexible, paintable joints in concrete and masonry construction
Neutral cure formulations safe for use on sensitive substrates including natural stone and mirrors
High UV and temperature resistance for long-lasting outdoor and exposed joint applications
Available in standard cartridge sizes compatible with manual and pneumatic caulking guns
Wide colour range including clear, white, grey, and black for aesthetically clean finishes

All Categories

Product Comparison

Sealants

Sealants

Specifications

Product Features