Flooring Products & Installation Materials | ESE Mall Cambodia

	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

Sika

Sikafloor-264 HC

(0)

$245.00

Sikafloor®-264 HC

A 2-part epoxy coloured floor coating providing a hard-wearing, seamless, low-maintenance gloss finish. Suitable as a roller coat for storage halls, workshops, and garages, or as a seal coat for broadcast systems in car parks, hangars, and wet process areas. Liquid proof with good chemical and mechanical resistance.

Overview

Specifications

Property	Value
Type	2-component epoxy floor coating
Mixing Ratio	Part A : Part B = 79 : 21 (by weight)
Density – Part A	~1.64 kg/L
Density – Part B	~1.00 kg/L
Density – Mixed	~1.40 kg/L
Solid Content	~100% by mass and volume
Shore D Hardness	~76 (7 days at +23°C, DIN 53505)
Abrasion Resistance	41 mg (CS 10/1000/1000, 7 days at +23°C, DIN 53109)
Compressive Strength	~53 N/mm² (28 days at +23°C, EN 196-1)
Flexural Strength	~20 N/mm² (28 days at +23°C, EN 196-1)
Tensile Adhesion Strength	>1.5 N/mm² (failure in concrete, ISO 4624)
Temperature Resistance (permanent)	+50°C dry heat
Temperature Resistance (short-term)	+80°C (max. 7 days); +100°C (max. 12 hours)
Shelf Life	24 months from date of production
Storage	Dry, +18°C to +30°C, original sealed packaging

Usage

Roller coat for concrete and cement screeds with normal to medium-heavy wear
Storage and assembly halls, maintenance workshops, garages, and loading ramps
Seal coat for broadcast systems in multi-storey and underground car parks
Maintenance hangars and wet process areas (beverage and food industry)

Advantages

Good chemical and mechanical resistance
Easy application by roller, squeegee, or brush
Liquid proof
Gloss finish
Slip-resistant surface possible (when broadcast with aggregate)
LEED v4 EQ credit compliant – low-emitting materials
Good biological resistance (ISO 846)

Packaging

20 kg set (Part A + Part B)
10 kg set (Part A + Part B)

Colour

Part A (Resin): Coloured liquid – available in multiple RAL colour shades
Part B (Hardener): Transparent liquid
Note: Under direct UV exposure, some discolouration may occur – no effect on performance

Product Details

Product Information

Property	Detail
Composition	Epoxy (2-component)
Shelf Life	24 months from date of production
Storage Conditions	Dry, +18°C to +30°C, original sealed packaging
Solid Content	~100% by mass and volume

Technical Information – Consumption

System	Layer	Product	Consumption
Roller Coating	Primer	1–2 × Sikafloor®-161 HC	0.35–0.55 kg/m² per layer
Roller Coating	Top Coat	2 × Sikafloor®-264 HC	0.3–0.5 kg/m² per layer
Textured Roller Coating	Primer	1–2 × Sikafloor®-161 HC	0.35–0.55 kg/m² per layer
Textured Roller Coating	Top Coat	1–2 × Sikafloor®-264 HC + 1% bw Extender T	0.5–0.8 kg/m² per layer
Broadcast System (~4 mm)	Primer	1 × Sikafloor®-161 HC	0.35–0.5 kg/m²
	Wearing Course	1 pbw Sikafloor®-264 HC + 1 pbw quartz sand (0.1–0.3 mm)	~4 kg/m² (~2 kg/m² binder + ~2 kg/m² sand)
	Broadcasting	Quartz sand 0.4–0.7 mm	~4–6 kg/m²
	Top Coat	1–2 × Sikafloor®-264 HC	0.6–0.8 kg/m² per layer

Pot Life

Temperature	Pot Life
+10°C	~50 minutes
+20°C	~25 minutes
+30°C	~15 minutes

Curing & Ready for Use

Temperature	Foot Traffic	Light Traffic	Full Cure
+10°C	~72 hours	~6 days	~10 days
+20°C	~24 hours	~4 days	~7 days
+30°C	~18 hours	~2 days	~5 days

Application

Application Information

Parameter	Value
Mixing Ratio	Part A : Part B = 79 : 21 (by weight)
Ambient Temperature	+10°C min / +30°C max
Substrate Temperature	+10°C min / +30°C max
Relative Humidity	Max. 80% r.h.
Substrate Moisture	<4% pbw (no rising moisture per ASTM polyethylene sheet test)
Dew Point	Substrate must be min. 3°C above dew point

Application Steps

Mixing: Stir Part A mechanically before use. Add all of Part B to Part A and mix continuously for 3 minutes at 300–400 rpm until uniform. Pour into a clean container and mix again. Avoid over-mixing to minimise air entrainment.
Primer: Apply Sikafloor®-161 HC by brush, roller, or squeegee. Preferred method: squeegee then back-roll crosswise. Apply two coats if needed to achieve a continuous, pore-free coat.
Levelling: Level rough surfaces using Sikafloor®-161 HC levelling mortar before applying coating.
Coating Application: Apply Sikafloor®-264 HC by short-piled roller crosswise in two coats.
Seal Coat: Apply by squeegee then back-roll crosswise with a short-piled roller.
Cleaning (Tools): Clean all tools immediately with Thinner C. Hardened material can only be removed mechanically.
Floor Maintenance: Remove spillages immediately. Clean regularly using rotary brush, mechanical scrubbers, high-pressure washer, or scrubber-dryer with suitable detergents.

In Stock (15 available)

Sika

Sikafloor-161 HC

(0)

$160.00

Sikafloor®-161 HC

A 2-part, low viscosity multipurpose epoxy resin for priming and levelling concrete and cementitious substrates. Solvent-free with excellent bond strength and short waiting times. Suitable as a primer, bonding bridge, levelling mortar binder, and intermediate layer for Sikafloor®-263 SL HC and Sikafloor®-264 HC flooring systems.

Overview

Specifications

Property	Value
Type	2-component low viscosity epoxy resin
Mixing Ratio	Part A : Part B = 79 : 21 (by weight)
Density – Part A	~1.6 kg/L
Density – Part B	~1.0 kg/L
Density – Mixed	~1.4 kg/L
Solid Content	~100% by mass and volume
Shore D Hardness	~76 (7 days at +23°C)
Compressive Strength	~60 N/mm² (28 days at +23°C)
Flexural Strength	~30 N/mm² (28 days at +23°C)
Tensile Adhesion Strength	>1.5 N/mm² (failure in concrete, ISO 4624)
Service Temperature	Max. +60°C short-term (7 days)
Shelf Life	24 months from date of production
Storage	Dry, +18°C to +30°C, original sealed packaging

Usage

Priming concrete substrates, cement screeds, and epoxy mortars
Low to medium absorbent substrates
Primer for Sikafloor®-263 SL HC and Sikafloor®-264 HC flooring systems
Binder for levelling mortars and mortar screeds
Intermediate layer underneath Sikafloor®-263 SL HC and Sikafloor®-264 HC

Advantages

Low viscosity with good penetration into substrate
Excellent bond strength (>1.5 N/mm²)
Solvent free
Easy application
Short waiting times between coats
Multi-purpose – primer, binder, bonding bridge, and screed
LEED v4 EQ credit compliant – low-emitting materials

Packaging

20 kg set (Part A + Part B)
10 kg set (Part A + Part B)

Colour

Part A (Resin): Brownish-transparent liquid
Part B (Hardener): Transparent liquid

Product Details

Product Information

Property	Detail
Composition	Epoxy (2-component)
Shelf Life	24 months from date of production
Storage Conditions	Dry, +18°C to +30°C, original sealed packaging
Solid Content	~100% by mass and volume

Technical Information

Coating System	Product / Mix	Consumption
Priming	Sikafloor®-161 HC	0.35–0.55 kg/m²
Levelling Mortar / Scratch Coat	1 pbw Sikafloor®-161 HC + 0.5 pbw quartz sand (0.1–0.3 mm)	1.7 kg/m²/mm
Bonding Bridge	Sikafloor®-161 HC	0.3–0.5 kg/m²
Resin Screed (15–20 mm)	1 pbw Sikafloor®-161 HC + 8 pbw quartz sand	2.2 kg/m²/mm

Pot Life

Temperature	Pot Life
+10°C	~50 minutes
+20°C	~25 minutes
+30°C	~15 minutes

Curing & Ready for Use

Substrate Temp.	Foot Traffic	Light Traffic	Full Cure
+10°C	~24 h	~6 days	~10 days
+20°C	~12 h	~4 days	~7 days
+30°C	~8 h	~2 days	~5 days

Application

Application Information

Parameter	Value
Mixing Ratio	Part A : Part B = 79 : 21 (by weight)
Ambient Temperature	+10°C min / +30°C max
Substrate Temperature	+10°C min / +30°C max
Relative Humidity	Max. 80% r.h.
Substrate Moisture	<4% pbw (no rising moisture per ASTM polyethylene sheet test)
Dew Point	Substrate must be min. 3°C above dew point
Layer Thickness (as top coat)	70–140 microns
Layer Thickness (standalone)	140–275 microns

Application Steps

Substrate Requirements: Concrete must have min. compressive strength of 25 N/mm² and pull-off strength ≥1.5 N/mm². Surface must be clean, dry, and free from oil, grease, coatings, and contaminants. Moisture content <4% pbw.
Substrate Preparation: Mechanically prepare using abrasive blast cleaning, planing, scarifying, or grinding to remove laitance. Grind high spots. Vacuum all dust and loose material. Fill cracks, blowholes, and voids with Sikafloor®, Sikadur®, or Sikagard® products.
Primer Mixing: Mix Part A for ~30 seconds. Add Part B to Part A. Mix continuously for ~3 minutes at 300–400 rpm until uniform. Pour into a clean container and mix again. Scrape sides and bottom at least once during final mixing.
Levelling Mortar Mixing: Mix Part A for ~30 seconds. Add Part B. While mixing, gradually add required filler/aggregates. Mix for a further 2 minutes until uniform. Pour into clean container and mix again.
Standard Primer Application: Pour mixed product onto substrate. Spread evenly with short pile roller or squeegee. Back-roll in two directions at right angles with a fleece roller. Maintain a wet edge. If broadcasting, wait 15–30 minutes then broadcast quartz sand to excess. Vacuum loose sand after hardening.
Bonding Bridge: Apply with brush, fleece roller, or squeegee. Back-roll in two directions. Apply second coat if required.
Resin Screed: Pour wet-on-wet onto still-tacky primer. Spread and compact with trowel to required thickness between screed rails. Level with levelling beam. Finish with trowels or power floats.
Cleaning: Clean all tools immediately with Thinner C. Hardened material can only be removed mechanically.

In Stock (5 available)

Sika

Sikafloor-6 Chapdur Grey KH

(0)

$9.40

Sikafloor-6 Chapdur Grey KH

A ready-to-use, dry shake cementitious floor hardener containing very hard, well-graded natural aggregates. Applied to freshly poured concrete to create a dense, high abrasion-resistant surface that reduces dust and improves impact resistance.

Specifications

Property	Value
Brand	Sika
Type	Ready-to-use dry shake cementitious floor hardener
Consumption	3–6 kg/m² (4 kg/m² normal traffic; 5–6 kg/m² heavy traffic)
Bulk Density	~1.65 kg/L (powder)
Shelf Life	12 months (unopened original packaging)
Storage	Dry, cool, shaded place
Packaging	25 kg bag
Colour	Grey

Product Features

High resistance to abrasion for warehouses, workshops, and heavy traffic floors
Reduces surface dust formation
Improves resistance to impact, oils, and greases
Easy application by hand sprinkling onto fresh concrete
Eliminates the need for a monolithic screed
Even finish when properly power-floated
Intrinsic grey colouring for a clean, professional finish
Suitable for parking lots, service stations, garages, and mechanical workshops

Only 4 left – Order soon!

Flooring

Achieve durable, professional floor finishes with our range of flooring products and installation materials. Suitable for residential, commercial, and industrial floor laying, levelling, and finishing projects across Cambodia.

Specifications

Category	Flooring
Use Case	Floor installation, Levelling, Finishing, Adhesion
Product Types	Floor adhesives, Self-levelling compounds, Floor screeds, Tile grouts
Application	Concrete slabs, Timber subfloors, Tile, Vinyl, Epoxy floors

Product Features

Self-levelling compounds for fast, flat floor preparation prior to final floor coverings
High-strength floor screeds for residential and commercial concrete floor finishing
Floor tile adhesives for secure bonding of ceramic, porcelain, and natural stone tiles
Epoxy floor coatings for durable, chemical-resistant finishes in industrial and commercial environments
Grouts and jointing compounds for clean, professional tile installation
Compatible with underfloor heating systems and a wide range of floor covering materials

All Categories

Product Comparison

Flooring

Flooring

Specifications

Product Features

All Categories

Explore Related Collections

Flooring

Flooring

Specifications

Product Features