Concrete Repair Products & Mortars | ESE Mall Cambodia

	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

Sika

Sikagard-62

(0)

$231.00

Sikagard®-62

A 2-part, rigid, 100% solids high-build epoxy resin protective coating. Solvent-free with excellent mechanical and chemical resistance. Suitable for chemical-resistant lining of storage tanks, silos, and anti-corrosion coating on steel in food processing, sewage, agricultural, and pharmaceutical facilities. CE marked per EN 1504-2 and WRAS approved for contact with potable water.

Overview

Specifications

Property	Value
Type	2-component 100% solids epoxy resin protective coating
Mixing Ratio	Part A : Part B = 3 : 1 (by weight)
Density – Part A	~1.45 kg/L
Density – Part B	~1.02 kg/L
Density – Mixed	~1.37 kg/L
Solid Content	~100%
Shore D Hardness	~80 (DIN 53505)
Tensile Adhesion Strength	>1.5 N/mm² to concrete (ISO 4624)
Layer Thickness	~0.2 mm per layer
Consumption	~0.30 kg/m² per layer
Temperature Resistance (permanent)	+50°C dry heat
Temperature Resistance (max. 7 days)	+80°C
Temperature Resistance (max. 12 hours)	+100°C
Shelf Life	12 months (Part A and Part B) from date of production
Storage	Dry, +5°C to +30°C, original sealed packaging, away from direct sunlight

Mechanical Resistance (Taber Abraser)

Test Condition	Result
CS 10 / 1000 / 1000	24.4 mg
CS 17 / 1000 / 1000	70 mg
H 22 / 1000 / 1000	560.6 mg

Usage

Chemical resistant protective layer on concrete, stone, cementitious mortars, epoxy cement, epoxy resin products, and steel
Lining in storage tanks and silos
Anti-corrosion coating on steel in food processing plants, sewage works, farms, agricultural enterprises, chemical and pharmaceutical facilities, and beverage industry

Advantages

Solvent free – 100% solids
Good mechanical and chemical resistance
High build – ~0.2 mm per layer
Impervious to liquids
Easy to mix and apply
CE marked per EN 1504-2 (concrete protection)
WRAS approved for contact with potable water (BS 6920-1:2000)
LEED v2009 IEQc 4.2 compliant

Packaging

12 kg set (Part A + Part B)

Colour

RAL 7032 (Pebble Grey) – other colours on request

Product Details

Product Information

Property	Detail
Composition	Epoxy resin (2-component, 100% solids)
Shelf Life	12 months from date of production (Part A and Part B)
Storage Conditions	Dry, +5°C to +30°C, original sealed packaging, protected from direct sunlight

Pot Life

Temperature	Pot Life
+10°C	~30 minutes
+20°C	~20 minutes
+30°C	~10 minutes

Waiting Time / Overcoating & Full Cure

Temperature	Min. Overcoating	Max. Overcoating	Full Cure
+10°C	~30 hours	~3 days	~14 days
+20°C	~10 hours	~2 days	~10 days
+30°C	~6 hours	~1 day	~5 days

Application

Application Information

Parameter	Value
Mixing Ratio	Part A : Part B = 3 : 1 (by weight)
Layer Thickness	~0.2 mm per layer
Consumption	~0.30 kg/m² per layer
Ambient Temperature	+8°C min / +40°C max
Substrate Temperature	+8°C min / +40°C max (min. 3°C above dew point)
Relative Humidity	<80%

Application Steps

Substrate Preparation – Concrete: Prepare mechanically to achieve an open-textured surface. Remove weak areas, expose blowholes and voids. Remove all dust and loose material by brush and/or vacuum. Fill open voids with a suitable Sika® pore filling mortar. Level surface roughness with a suitable Sika® rendering and levelling mortar. Use a suitable primer on high-absorbent, non-sound, or non-cement-based substrates.
Substrate Preparation – Steel: Abrasive blast clean to SSPC-SP 10 “near white metal” or Sa 2½ (ISO EN 12944-4). Prepare welds and joints per EN 14879 Part 1. Remove all dust, dirt, and blasting material. Use air-conditioning to maintain surface conditions after blast cleaning.
Mixing: Stir Part A mechanically before use. Add all of Part B to Part A and mix continuously for 3 minutes using a low-speed stirrer (300–400 rpm) to avoid air entrapment. Pour into a clean container and stir again to ensure thorough mixing. Use only within the pot life.
Application: Apply by brush, roller, or airless spray at ~0.30 kg/m² per layer (~0.2 mm DFT). Apply multiple coats as required within the overcoating window.
Cleaning: Clean all tools immediately with Thinner C. Hardened/cured material can only be removed mechanically.

In Stock (5 available)

Sika

Sika MonoTop-613 IND

(0)

$27.68

Sika MonoTop®-613 IND

A cementitious, fibre reinforced, polymer modified 1-component repair mortar mixed with water only. Excellent thixotropic behaviour makes it suitable for overhead and vertical applications up to 40 mm in a single layer. Ideal for repairing damaged, spalled, and honeycombed concrete caused by reinforcement corrosion.

Overview

Specifications

Property	Value
Type	1-component fibre reinforced polymer modified cementitious repair mortar
Appearance / Colour	Powder / Grey
Density (fresh mortar)	~2.05 kg/L
Layer Thickness	5 mm min / 40 mm max (vertical area)
Mixing Ratio	~3.25 L water per 25 kg bag (~0.13 L per 1 kg powder)
Pot Life at +30°C	25 minutes
Ambient Temperature	+5°C min / +35°C max
Consumption	~18.5–19.5 kg/m² per 10 mm thickness (~1.9 kg/m² per 1 mm)
Shelf Life	9 months from date of production
Storage	Dry, cool, shaded place, original unopened packaging

Compressive Strength

Age	Compressive Strength	Standard
1 day	~12 N/mm²	ASTM C-109
7 days	~35 N/mm²
28 days	~45 N/mm²

Flexural Strength

Age	Flexural Strength	Standard
1 day	~5.0 N/mm²	ASTM C-348
7 days	~8.0 N/mm²
28 days	~10.0 N/mm²

Usage

Repairing damaged and spalled concrete on vertical areas caused by reinforcement corrosion
General concrete repair and refurbishment work
Repair of honeycombed, damaged, and spalled concrete
Part of a concrete repair system in combination with Sika MonoTop®-610 as bonding primer and reinforcement corrosion protection

Features

Mixed with water only – 1-component, easy to use
Excellent workability with adjustable consistency
Excellent thixotropic behaviour – suitable for overhead and vertical applications
Good mechanical strengths (45 N/mm² compressive at 28 days)
Excellent frost resistance
Applicable in layers up to 40 mm thickness (vertical area)
Non-corrosive, non-toxic
Low shrinkage curing

Packaging

25 kg bag

Colour

Grey powder

Product Details

Product Information

Property	Detail
Composition	Cementitious, fibre reinforced, polymer modified (1-component)
Appearance	Powder / Grey
Shelf Life	9 months from date of production (unopened original packaging)
Storage Conditions	Dry, cool, shaded place
Density (fresh mortar)	~2.05 kg/L

Application

Application Information

Parameter	Value
Mixing Ratio	~3.25 L water per 25 kg bag (~0.13 L / 1 kg powder)
Consumption	~18.5–19.5 kg/m² per 10 mm thickness
Layer Thickness	5 mm min / 40 mm max
Ambient Temperature	+5°C min / +35°C max
Pot Life at +30°C	25 minutes

Application Steps

Substrate Preparation: Substrate must be sound and free of loose or weak particles, dust, and dirt. Completely remove oil, wax, laitance, and poorly bonded coatings. For optimum bond, roughen the surface well.
Mixing: Pour the required quantity of clean water into the mixing container. Add powder while mixing continuously using a low-speed electric mixer (max. 500 rpm) for 3 minutes, avoiding air entrapment. Add powder in portions to achieve the desired consistency. Do not add extra water after mixing.
Application: Apply with a spatula or trowel onto a well-saturated concrete substrate. For thickness greater than 40 mm, apply in several layers. Once the mortar starts to set, smooth with a wooden or synthetic float or a styrofoam block.
Bonding Coat: For large area applications, apply SikaTop 121 as a bonding coat before applying Sika MonoTop®-613 IND for optimum adhesion.
Curing: Keep mortar moist if exposed to strong sunshine or wind to prevent premature drying. Standard curing methods are recommended. For a very fine surface finish, apply SikaTop 121 as a filling compound on top after curing.
Cleaning: Clean tools and mixing equipment with water while material is still fresh. Hardened material can only be removed mechanically.

In Stock (5 available)

Sika

Sikafloor CureHard-24 15L

(0)

$62.00

Sikafloor® CureHard-24

A high-volume solids, one-part, clear sodium silicate-based liquid hardener and densifier for fresh or hardened concrete. Reduces dust emissions, increases abrasion resistance by 81.5%, and seals concrete surfaces. Odourless and easy to apply. CE marked per EN 1504-2.

Overview

Specifications

Property	Value
Type	1-part sodium silicate liquid surface hardener
Colour	Clear
Density	1.2 kg/L at +20°C (EN ISO 2811-1)
Solid Content	24% by mass
Abrasion Resistance (treated)	1350 mg (H22/1000g/1000 cycles) – 81.5% increase vs untreated
Tensile Adhesion Strength	4.8 N/mm² (EN 1542)
Penetration Depth	5.5 mm (EN 1504-2)
Water Absorption	w = 0.03 kg·m⁻²·h⁻⁰·⁵ (EN 1062-3)
Impact Resistance	60 Nm, Class III ≥20 Nm (EN ISO 6272-1)
Touch Dry at +20°C	2 hours
Full Cure at +20°C	5 hours
Max. Sealing & Hardening	7 days at +20°C
Shelf Life	24 months from date of production
Storage	Dry, +5°C to +40°C, original sealed packaging

Usage

Hardening and densifying concrete surfaces requiring light to moderate abrasion resistance
Dust-proofing prefabricated concrete elements
Horizontal old or new concrete surfaces
Industrial, commercial, and public buildings – interior and exterior

Advantages

Reduces dust emissions vs untreated concrete
81.5% increase in abrasion resistance vs untreated concrete
Seals concrete surfaces
Very good yellowing resistance
One-part – ready to use
Easy to apply by spray
High gloss with regular cleaning
Odourless
LEED v4 MR Credit compliant – EPD available
CE marked per EN 1504-2

Packaging

15 L container
200 L drum

Colour

Clear

Product Details

Product Information

Property	Detail
Composition	Sodium silicate water dilution
Solid Content	24% by mass
Shelf Life	24 months from date of production
Storage Conditions	Dry, +5°C to +40°C, original sealed packaging

Technical Information

Property	Value	Standard
Abrasion Resistance (treated)	1350 mg (H22/1000g/1000 cycles)	EN 1766:2000
Abrasion Resistance (untreated)	270 mg (H22/1000g/1000 cycles)	EN 1766:2000
Impact Resistance	60 Nm (Class III: ≥20 Nm)	EN ISO 6272-1
Tensile Adhesion Strength	4.8 N/mm²	EN 1542
Penetration Depth	5.5 mm	EN 1504-2
Water Absorption	w = 0.03 kg·m⁻²·h⁻⁰·⁵	EN 1062-3

Curing & Ready for Use

Temperature	Overcoating Wait Time	Full Cure
+5°C / 50% r.h.	3.5 hours	–
+10°C / 50% r.h.	3 hours	6 hours
+20°C / 50% r.h.	2 hours	5 hours
+30°C / 50% r.h.	1.5 hours	4 hours

Application

Application Information

Parameter	Value
Ambient Temperature	+5°C min / +35°C max
Substrate Temperature	+5°C min / +35°C max
Relative Humidity	Max. 100%

Consumption

0.15–0.25 L/m² per coat (4–7 m²/L) on power-trowelled concrete
A second coat is required on porous, rough-textured, or brush-finished surfaces

Application Steps

Substrate – Fresh Concrete (≥7 days): Finish using power floating, manual floating, or tamping. Cure for at least 7 days with water spray, blankets, or plastic sheets.
Substrate – Hardened/Old Concrete: Clean with high-pressure water cleaner. Allow to dry completely. Remove all dust, dirt, and loose material with brush or vacuum.
Important – Remove Existing Treatments: Completely remove any curing agents, membrane-forming sealers, or asphalt before application.
Application: Apply in a continuous film using a high-volume, low-pressure spray unit. Do not use sprayers previously used for silicones or release agents. Touch up any dry spots immediately.
Scrubbing: Scrub material into the surface with a soft bristle broom or floor-scrubbing machine for minimum 30 minutes until the material begins to gel and becomes slippery.
Reworking: Wet the surface slightly with water spray and rework for another 10–20 minutes.
Removal of Excess: After ~20 minutes when material returns to a gel, rinse the floor and remove excess with a squeegee, wet vacuum, or mop. Dried residue leaves white stains removable only mechanically.
Second Coat: Apply on porous or rough surfaces after the first coat is dry and tack-free.
Before Subsequent Coating: After cure, abrade the surface mechanically (light to heavy shot blasting) before applying any subsequent coating system.
Hot Weather (>+25°C): Store product in a cool place. Apply additional material to keep surface wet during scrubbing.
Moisture Protection: Protect treated surface from moisture for at least 3 days after application to prevent efflorescence.

In Stock (5 available)

Sika

Sika Plastocrete KH

(0)

From $11.00

Sika Plastocrete KH

Sika Plastocrete KH is a liquid plasticizer and waterproofing admixture for concrete and mortar. It improves workability, increases strength and durability, and reduces shrinkage — all without increasing water content. Chloride-free and compatible with all Portland Cement types.

Specifications

Brand	Sika
Product	Plastocrete KH
Type	Liquid plasticizer and waterproofing admixture
Composition	Modified Lignosulphonate
Colour	Brown liquid
Density	1.055–1.075 kg/L at +25°C
pH Value	4.0–6.0
Dosage	0.5 kg per 2 bags of cement (100 kg)
Shelf Life	12 months (original sealed packaging)
Packaging	5L / 25L

Product Features

Waterproofing of concrete and masonry structures — reservoirs, pools, tunnels, water tanks
Improved workability without increased water content
Increased concrete strength and durability
Reduced shrinkage and improved watertightness
Chloride-free — safe for reinforced concrete
Compatible with all Portland Cement types including S.R.C. and Hydraulic Cement

In Stock (10 available)

Sika

SikaWall-126 Plaster Mix KH

(0)

$5.50

SikaWall-126 Plaster Mix KH

A one-component, prepacked polymer-modified mortar combining cement with selected grades of sand and admixtures. Suitable for use as light brick plaster, red brick plaster, and red brick adhesive on various surfaces.

Specifications

Property	Value
Brand	Sika
Type	One-component polymer-modified cementitious mortar
Mixing Ratio	3.2–3.5 L water per 25 kg bag
Layer Thickness (Brick Adhesive)	~10 mm (max. 15 mm)
Layer Thickness (Plastering)	Min. 5 mm (max. 15 mm)
Pot Life	~1 hour at +30°C
Density	~1.65 kg/L
Shelf Life	9 months from date of production
Storage	Dry conditions, +5°C to +30°C
Packaging	25 kg bag
Colour	Grey powder

Product Features

Multifunctional: plaster mortar, red brick adhesive, and all types of brick adhesive
Excellent adhesion to light brick and red brick surfaces
Easy to use – just add water
Reduces cracking from plaster expansion and shrinkage
Faster working process and time saving
Compressive strength ~6 N/mm² at 28 days (ASTM C-109)

In Stock (5 available)

Concrete Repair

Restore and reinforce damaged concrete surfaces with our range of professional concrete repair products. Suitable for structural repairs, floor resurfacing, crack filling, and surface restoration across construction and maintenance projects in Cambodia.

Specifications

Category	Concrete Repair
Use Case	Crack repair, Surface resurfacing, Structural patching, Joint filling
Product Types	Repair mortars, Epoxy grouts, Crack injections, Resurfacing compounds
Application	Floors, Walls, Columns, Beams, Bridges, Industrial slabs

Product Features

High-strength repair mortars for structural and non-structural concrete patching and resurfacing
Epoxy-based grouts and injection systems for crack sealing and structural bonding
Rapid-setting formulations for fast return to service in high-traffic and industrial environments
Suitable for horizontal, vertical, and overhead applications on concrete and masonry
Excellent adhesion to existing concrete substrates without the need for bonding agents
Durable, shrinkage-compensated compounds for long-lasting repairs in demanding conditions

Shop by Brand

Product Comparison

Concrete Repair

Concrete Repair

Specifications

Product Features

Shop by Brand

Explore Related Collections

Concrete Repair

Concrete Repair

Specifications

Product Features