TCT Saw Blade 185mm 40T

The JADEVER JDTC1K05 is a 185mm (7-1/4") 40-tooth TCT (Tungsten Carbide Tipped) circular saw blade with a 20mm arbor and 16mm reduction ring, designed for fine, smooth cross-cutting of wood, plywood, and timber. The 40T tooth configuration delivers cleaner, finer cuts compared to 24T blades, making it ideal for finish carpentry and joinery applications.

Specifications

Product Features

• 40T TCT tooth configuration for fine, smooth cross-cutting with minimal tear-out
• Tungsten carbide tips for long-lasting sharpness and durability
• 185mm (7-1/4") diameter fits all standard 185mm circular saws
• 20mm arbor with included 16mm reduction ring for broad compatibility
• Anti-vibration slots for reduced noise and smoother cutting performance
• Ideal for finish carpentry, joinery, plywood, MDF, and fine wood cross-cutting

Drive screws faster and harder with the TACIM16PH233 Impact Screwdriver Bit Set. Engineered specifically for use with impact drivers, these magnetic PH2 bits are made from industrial-grade S2 steel — tough enough to handle the high-torque, high-impact forces that standard bits can't withstand. Packed in a convenient plastic case, this 10-piece set keeps your bits organized and protected on the job site.

Specifications

• Model: TACIM16PH233
• Set: 10 pcs
• Hex Shank: 1/4"
• Size: PH2
• Length: 65mm
• Material: S2 Steel (Magnetic)
• Packaging: Plastic case

Built for Impact Drivers

• Impact-rated S2 steel – absorbs high-torque shock without snapping or stripping
• 1/4" hex shank – universal fit for all standard impact drivers and drills
• Magnetic tip – keeps screws in place for fast, one-handed driving
• Plastic case – keeps all 10 bits organized and easy to carry

TCT Saw Blade 235mm 40T

The JADEVER JDTC1K07 is a 235mm (9-1/4") 40-tooth TCT (Tungsten Carbide Tipped) circular saw blade with a 30mm arbor and both 25.4mm and 16mm reduction rings included, designed for fine, smooth cross-cutting of wood, plywood, and timber. The 40T tooth configuration delivers cleaner cuts with minimal tear-out, ideal for finish carpentry and joinery.

Specifications

Product Features

• 40T TCT tooth configuration for fine, smooth cross-cutting with minimal tear-out
• Tungsten carbide tips for long-lasting sharpness and durability
• 235mm (9-1/4") diameter fits standard 235mm circular saws and mitre saws
• 30mm arbor with 25.4mm and 16mm reduction rings for broad saw compatibility
• Anti-vibration slots for reduced noise and smoother cutting performance
• Ideal for finish carpentry, joinery, plywood, MDF, and fine wood cross-cutting

TCT Saw Blade 210mm 24T

The JADEVER JDTC1K14 is a 210mm (8-1/4") 24-tooth TCT (Tungsten Carbide Tipped) circular saw blade with a 30mm arbor and both 25.4mm and 16mm reduction rings included, designed for fast ripping and cross-cutting of wood, plywood, and timber. The 24T tooth configuration delivers aggressive, efficient cuts for general construction and carpentry applications.

Specifications

Product Features

• 24T TCT tooth configuration for fast, aggressive ripping and cross-cutting of wood
• Tungsten carbide tips for long-lasting sharpness and durability
• 210mm (8-1/4") diameter fits standard 210mm circular saws and mitre saws
• 30mm arbor with 25.4mm and 16mm reduction rings for broad saw compatibility
• Anti-vibration slots for reduced noise and smoother cutting performance
• Ideal for ripping timber, cutting plywood, OSB, and general construction wood cutting

Impact Screwdriver Bits PH2 250mm 2pcs

The JADEVER JDSV6K66 is a 2-piece set of 250mm extra-long PH2 impact screwdriver bits made from S2 steel with an optimized shock zone for superior impact resistance. The extended 250mm length provides deep reach into recessed areas, while the magnetic tip and high-visibility green sleeve make them ideal for use with impact drivers and power drills in demanding fastening applications.

Specifications

Product Features

• Extra-long 250mm length for deep reach into recessed cavities and tight spaces
• S2 steel construction for superior hardness and toughness under impact
• Optimized shock zone absorbs and distributes impact energy to extend bit life
• Magnetic PH2 tip securely holds screws for one-handed fastening
• High-visibility green sleeve for easy identification in the toolbox
• 1/4" hex shank fits all standard impact drivers and power drills
• Ideal for decking, framing, electrical installation, and deep-cavity fastening

Impact Screwdriver Bits PH2+SL6 65mm 2pcs

The JADEVER JDSV3K63 is a 2-piece set of 65mm double-ended impact screwdriver bits combining PH2 Phillips and SL6.0 slotted tips, made from S2 steel with an optimized shock zone for superior impact resistance. The high-visibility green sleeve and magnetic tips make them ideal for use with impact drivers and power drills in demanding fastening applications.

Specifications

Product Features

• Double-ended design: PH2 Phillips on one end, SL6.0 slotted on the other
• S2 steel construction for superior hardness and toughness under impact
• Optimized shock zone absorbs and distributes impact energy to extend bit life
• Magnetic tips securely hold screws for one-handed fastening
• High-visibility green sleeve for easy identification in the toolbox
• 1/4" hex shank fits all standard impact drivers and power drills
• Ideal for electrical installation, furniture assembly, and general construction fastening

Utility Knife Blades 19x61mm 10pcs

The JADEVER JDMK1K61 is a set of 10 high-carbon steel utility knife blades sized 19x61mm, compatible with all standard 19mm utility knives. Stored in a compact plastic box for safe handling and storage, they are ideal for cutting cardboard, carpet, drywall, packaging, and general construction materials.

Specifications

Product Features

• 10-piece set for extended use before replacement is needed
• 19x61mm size compatible with all standard 19mm utility knives
• High-carbon SK5 steel for a sharp, long-lasting cutting edge
• Snap-off design for quick blade renewal when edge dulls
• Compact plastic box for safe storage and easy blade dispensing
• Ideal for cutting cardboard, carpet, drywall, vinyl, packaging, and general construction materials

Grass Trimmer Chain Head 25cm

The JADEVER JDJC3425 is a heavy-duty replacement chain head for JADEVER grass trimmers, featuring a 25cm chain length (12.5cm single-sided reach) for effective cutting of thick grass, weeds, and brush. The steel chain design offers superior durability over nylon line for demanding garden and land clearing work.

Specifications

Product Features

• 25cm steel chain for superior cutting performance on thick grass, weeds, and brush
• 12.5cm single-sided reach for wide cutting coverage per pass
• Steel chain construction for longer service life compared to nylon line heads
• Direct replacement for JADEVER grass trimmer models JDGM1543, JDGM2543, JDGM1552, JDGM2552, JDGM1562, JDGM2562, and JDGM4 series
• Easy installation with standard trimmer head mounting
• Ideal for garden maintenance, land clearing, and heavy-duty grass trimming

Impact Driver Set 13Pcs

A complete 13-piece impact driver set by Jadever, featuring a heavy-duty impact driver with a 1/2"–5/16" sleeve adapter and 13 Cr-V screwdriver bits covering flat, Phillips, and hex tip types. Ideal for driving screws into tough materials quickly and efficiently.

Specifications

Product Features

• 13-piece set with flat, Phillips, and hex screwdriver bits
• Includes 1/2"–5/16" sleeve adapter for versatile use
• Cr-V steel bits for durability and corrosion resistance
• Impact-rated driver handle for high-torque applications
• Knurled metal grip for secure handling
• Comes in a sturdy green hard case for storage and transport

Wire Brush Set 3 Pcs

Hex shank wire brush set for power drills combining a wire wheel brush, cup brush, and wire end brush. Covers flat surfaces, contoured areas, and tight holes for deburring, descaling, paint stripping, and weld seam cleaning.

Specifications

What's in the Box

• 1× Wire Wheel Brush with Hex Shank, 2"
• 1× Cup Brush with Hex Shank, 2"
• 1× Wire End Brush (Pencil) with Hex Shank, 1"

Materials & Care

• Steel wire bristles with secure hex shanks for reliable performance
• Always wear eye protection and gloves when operating
• Ensure each shank is fully secured in the chuck before use
• Inspect bristles for wear before each use; store in a dry environment

Wire Brush 250mm

Sturdy 250mm hand wire brush for cleaning, deburring, rust removal, and surface preparation on metal, wood, and masonry surfaces.

Specifications

What's in the Box

• 1× TOTAL Wire Brush 250mm (THT92102)

Materials & Care

• Steel wire bristles for effective scrubbing and surface cleaning
• Wear gloves when using to protect hands from wire bristles
• Rinse and dry after use to prevent rust on bristles
• Store in a dry environment; replace when bristles become bent or worn

Pencil Wire Brush 1"

1" wire end brush (pencil brush) with a 1/4" hex shank for power drills, rated at 4500 RPM. Narrow cylindrical profile ideal for cleaning, deburring, and descaling in holes, grooves, pipes, and other hard-to-reach areas.

Specifications

What's in the Box

• 1× TOTAL Pencil Wire Brush 1" (TAC37011)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Wheel Brush 4"

4" (100mm) wire wheel brush with a 1/4" hex shank for power drills, rated at 4500 RPM. Wide surface coverage for efficient planing, deburring, descaling, paint stripping, and weld seam cleaning.

Specifications

What's in the Box

• 1× TOTAL Wire Wheel Brush 4" (TAC34041)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Wheel Brush 3"

3" (75mm) wire wheel brush with a 1/4" hex shank for power drills, rated at 4500 RPM. 0.3mm × 16mm wire diameter for effective planing, deburring, descaling, and weld seam cleaning.

Specifications

What's in the Box

• 1× TOTAL Wire Wheel Brush 3" (TAC34031)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Wheel Brush 2"

2" (50mm) wire wheel brush with a 1/4" hex shank for power drills, rated at 4500 RPM. 0.3mm × 10mm wire diameter for planing, deburring, descaling, and weld seam cleaning in tight spots and detailed work.

Specifications

What's in the Box

• 1× TOTAL Wire Wheel Brush 2" (TAC34021)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Cup Brush 3"

3" (75mm) wire cup brush with a 1/4" hex shank for power drills and drill presses, rated at 4500 RPM. Ideal for planing, deburring, descaling, and weld seam cleaning in areas where an angle grinder won't reach.

Specifications

What's in the Box

• 1× TOTAL Wire Cup Brush 3" (TAC33031)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Cup Brush 2"

2" (50mm) wire cup brush with a 1/4" hex shank for power drills and drill presses, rated at 4500 RPM. 0.3mm × 17mm wire diameter for planing, deburring, descaling, and weld seam cleaning in tight spaces where an angle grinder won't fit.

Specifications

What's in the Box

• 1× TOTAL Wire Cup Brush 2" (TAC33021)

Materials & Care

• Steel wire bristles with secure 1/4" hex shank
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Ensure the shank is fully secured in the chuck before use
• Store in a dry environment to prevent rust on bristles

Wire Cup Brush 5"

Professional 5" (125mm) wire cup brush for angle grinders with M14×2 spindle thread, rated at 6500 RPM. 0.3mm wire diameter and 30mm wire length for effective planing, deburring, descaling, and weld seam cleaning on steel, cast steel, and wood.

Specifications

What's in the Box

• 1× TOTAL Wire Cup Brush 5" (TAC31051)

Materials & Care

• Steel wire bristles for aggressive, long-lasting performance on metal and wood
• Always wear eye protection and gloves when operating
• Do not exceed the rated 6500 RPM speed
• Ensure the M14×2 thread is fully secured before use
• Store in a dry environment to prevent rust on bristles

Wire Cup Brush 4"

Professional 4" (100mm) wire cup brush for angle grinders with M14 spindle thread. Ideal for planing, deburring, descaling, paint stripping, and weld seam cleaning on metal surfaces.

Specifications

What's in the Box

• 1× TOTAL Wire Cup Brush 4" (TAC31041)

Materials & Care

• Steel wire bristles for aggressive, long-lasting performance on metal surfaces
• Always wear eye protection and gloves when operating
• Ensure the M14 thread is fully secured before use
• Inspect bristles for wear before each use; store in a dry environment

Wire Cup Brush 3" M10

Professional 3" (75mm) wire cup brush with nut for angle grinders, M10×1.5 spindle thread, rated at 12500 RPM. 0.3mm × 23mm wire diameter for powerful planing, deburring, descaling, and weld seam cleaning on metal surfaces.

Specifications

What's in the Box

• 1× TOTAL Wire Cup Brush 3" M10 with Nut (TAC31031.2)

Materials & Care

• Steel wire bristles for aggressive, long-lasting performance on metal surfaces
• Always wear eye protection and gloves when operating
• Do not exceed the rated 12500 RPM speed
• Ensure the M10×1.5 thread is fully secured before use
• Store in a dry environment to prevent rust on bristles

Wire Wheel 5"

Professional 5" (125mm) wire wheel for angle grinders, rated at 4500 RPM. 0.3mm line diameter and 35mm total line length for effective planing, deburring, descaling, and weld seam cleaning on metal surfaces.

Specifications

What's in the Box

• 1× TOTAL Wire Wheel 5" (TAC36051)

Materials & Care

• Steel wire bristles for long-lasting performance on metal surfaces
• Always wear eye protection and gloves when operating
• Do not exceed the rated 4500 RPM speed
• Inspect bristles for wear before each use; store in a dry environment

Screwdriver Bits Set 55 Pcs

Professional 55-piece magnetic Cr-V screwdriver bits set in a carrying case. Covers slotted, Phillips, Pozidriv, Torx, and hex profiles plus 9 sockets, ratchet handle, and precision handle — the all-in-one fastening solution for electricians, mechanics, and serious DIYers.

Specifications

What's in the Box

• 21× Screwdriver Bits (6.35×25mm): SL4, SL5, SL6, PH1, PH2×3, PH3, PZ1, PZ2, PZ3, T10, T15, T20, T25, T30, T40, H3, H4, H5, H6
• 20× Precision Bits (4mm×28mm): SL1.5, SL2, SL2.5, SL3, PH000, PH00, PH0, PH1, T6, T7, T8, T9, T10, T15, T20, H1.5, H2.0, H2.5, H3.0, H4.0
• 9× Sockets 1/4"×20.5mm: 4, 5, 6, 7, 8, 9, 10, 11, 12mm
• 1× Bits Adaptor, 4–6mm × 25mm
• 1× Bits Holder, 6.35mm × 50mm
• 1× Bits Holder, 4mm × 60mm
• 1× Ratchet Screwdriver Handle
• 1× Precision Screwdriver Handle
• 1× Carrying Plastic Box

Materials & Care

• Magnetic Cr-V steel for superior hardness, tip retention, and convenient screw pickup
• Store all bits in the carrying case to prevent loss and protect tips
• Do not use precision bits for heavy-torque applications
• Apply light oil to sockets periodically to maintain smooth operation

Angle Grinder Stand 100-125mm

The JADEVER JDASC1251 is a heavy-duty angle grinder stand with an aluminum alloy body and cast iron base, designed to convert any 100-125mm angle grinder into a stationary cut-off machine. The clamping angle is adjustable from 0° to 45° for versatile bevel and straight cutting of metal, pipe, and bar stock.

Specifications

Product Features

• Fits all standard 100-125mm angle grinders for conversion to a stationary cut-off machine
• Clamping angle adjustable from 0° to 45° for straight and bevel cuts
• Aluminum alloy body for lightweight rigidity and vibration damping
• Heavy cast iron base for maximum stability during cutting operations
• T-slot workpiece clamp for secure, repeatable material positioning
• Spring-return arm for safe, controlled cutting action
• Ideal for cutting metal bar, pipe, angle iron, and flat stock in workshop environments

Drill Stand 60mm

The JADEVER JDADS1509 is a heavy-duty drill stand with an aluminum alloy base and body, 43mm holder capacity, and 60mm single working stroke, designed to convert any standard electric drill into a precise bench drill press. The sturdy cast base and adjustable column ensure accurate, repeatable vertical drilling for woodworking, metalworking, and general workshop use.

Specifications

Product Features

• 43mm universal holder capacity fits most standard electric drills and rotary tools
• 60mm working stroke for drilling through standard workpiece thicknesses
• Aluminum alloy base and body for lightweight rigidity and vibration damping
• Flat cast base with clamping slots for secure workbench mounting
• Adjustable column height for accommodating different drill and workpiece sizes
• Converts any standard electric drill into a precise bench drill press
• Ideal for woodworking, metalworking, and general workshop drilling applications

TCT Saw Blade 185mm 24T

The JADEVER JDTC1K04 is a 185mm (7-1/4") 24-tooth TCT (Tungsten Carbide Tipped) circular saw blade with a 20mm arbor and 16mm reduction ring, designed for fast, clean ripping and cross-cutting of wood, plywood, and timber. The 24T tooth configuration delivers aggressive, efficient cuts for general construction and carpentry applications.

Specifications

Product Features

• 24T TCT tooth configuration for fast, aggressive ripping and cross-cutting of wood
• Tungsten carbide tips for long-lasting sharpness and durability
• 185mm (7-1/4") diameter fits all standard 185mm circular saws
• 20mm arbor with included 16mm reduction ring for broad compatibility
• Anti-vibration slots for reduced noise and smoother cutting performance
• Ideal for ripping timber, cutting plywood, OSB, and general construction wood cutting

Dry Diamond Disc 180mm

The JADEVER JDDC1K04 is a 180mm (7") segmented dry diamond disc with a 22.2mm bore and 7.5mm blade width, certified to EN 13236. Designed for fast cutting of concrete, stone, brick, and masonry in both dry and wet conditions, it delivers clean, precise cuts with minimal chipping.

Specifications

Product Features

• Segmented diamond rim for fast, aggressive cutting in concrete, stone, brick, and masonry
• Suitable for both dry and wet cutting applications
• 7.5mm blade width for stable, straight cuts with minimal deviation
• 22.2mm bore fits standard angle grinders and cut-off saws
• EN 13236 certified for safety and performance compliance
• Max 8,500 RPM for use with 180mm angle grinders
• Ideal for construction, tiling, landscaping, and general masonry cutting

SDS Max Hammer Drill Bit 16x280mm

The JADEVER JDHD01626 is a heavy-duty 16x280mm SDS Max hammer drill bit with a high-quality TCT (Tungsten Carbide Tip), designed for large-diameter hole drilling in concrete, marble, and brick. The SDS Max shank is engineered for high-power rotary hammers, delivering maximum energy transfer for fast penetration in demanding construction applications.

Specifications

Product Features

• SDS Max shank for use with high-power rotary hammers and demolition hammers
• High-quality TCT tip for fast, precise penetration into concrete, marble, and brick
• 280mm length for deep-hole drilling in thick structural elements
• 16mm diameter for extra-large anchor bolt and heavy conduit installations
• Double flute design for efficient debris removal during drilling
• Ideal for structural anchor installation, heavy conduit, and large-diameter masonry drilling

SDS Max Hammer Drill Bit 14x280mm

The JADEVER JDHD01426 is a heavy-duty 14x280mm SDS Max hammer drill bit with a high-quality TCT (Tungsten Carbide Tip), designed for large-diameter hole drilling in concrete, marble, and brick. The SDS Max shank is engineered for high-power rotary hammers, delivering maximum energy transfer for fast penetration in demanding construction applications.

Specifications

Product Features

• SDS Max shank for use with high-power rotary hammers and demolition hammers
• High-quality TCT tip for fast, precise penetration into concrete, marble, and brick
• 280mm length for deep-hole drilling in thick structural elements
• 14mm diameter for large anchor bolt and heavy conduit installations
• Double flute design for efficient debris removal during drilling
• Ideal for structural anchor installation, heavy conduit, and large-diameter masonry drilling

SDS Plus Hammer Drill Bit 12x160mm

The JADEVER JDHD1208 is a 12x160mm SDS Plus hammer drill bit with a high-quality TCT (Tungsten Carbide Tip) and chrome-vanadium steel body, designed for fast, precise drilling in concrete, brick, and masonry. The extended 160mm length and 12mm diameter make it ideal for larger anchor bolt and conduit installations, while the sandblasted surface finish reduces friction and improves chip evacuation.

Specifications

Product Features

• High-quality TCT tip for fast, precise penetration into concrete, brick, and masonry
• Chrome-vanadium steel body for superior toughness and resistance to impact fatigue
• SDS Plus shank for secure, tool-free chuck engagement on all SDS Plus rotary hammers
• Extended 160mm length for deep anchor bolt and conduit drilling
• Sandblasted surface finish reduces friction and improves chip evacuation
• Double flute design for efficient debris removal during drilling
• Ideal for M10-M12 anchor bolt installation, large conduit, and heavy masonry drilling