Stock up and keep cutting with the TAC2211005 Abrasive Metal Cutting Disc Set. This 10-piece set of 105mm ultra-thin cutting discs is built for fast, clean cuts through metal — pipes, rebar, sheet metal, angle iron, and more. At just 1.2mm thick, each disc minimises material loss and heat buildup for precise, efficient cuts every time.

Specifications

• Model: TAC2211005
• Set: 10 pcs
• Disc Diameter: 105mm
• Bore: 16mm
• Thickness: 1.2mm
• Application: Metal

Product Details

• Designed for use with 105mm (4") angle grinders
• 1.2mm ultra-thin profile – minimises material loss and reduces heat for cleaner cuts
• 16mm bore – standard fit for most 105mm angle grinders
• Suitable for cutting pipes, rebar, sheet metal, angle iron, and other metal materials
• 10-piece set – great value, always have a disc ready on the job

Materials & Care

• Application Material: Metal
• Store in a cool, dry place away from moisture and direct sunlight
• Inspect each disc for cracks or damage before use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the grinder's maximum rated speed

Stock up for the job site with the TAC2111003M Dry Diamond Disc Set. This 10-piece set of 100mm universal segmented diamond discs delivers fast, aggressive cutting on tile, stone, concrete, and brick — wet or dry. Packed in a durable metal box for easy storage and transport on site.

Specifications

• Model: TAC2111003M
• Set: 10 pcs
• Disc Diameter: 100mm (4")
• Bore: 16mm (5/8")
• Blade Length: 7.5mm
• Cut Type: Wet and Dry
• Application: Universal segmented, Fast Cut
• Packaging: Metal box

Product Details

• Designed for use with 100mm (4") angle grinders
• Universal segmented design – fast, aggressive cutting on tile, stone, concrete, and brick
• Fast cut performance – 7.5mm blade length for efficient material removal
• Wet and dry cutting – versatile use with or without water cooling
• 16mm (5/8") bore – standard fit for most 100mm angle grinders
• 10-piece set in metal box – great value, protected storage for job site use

Materials & Care

• Segment: Diamond (universal segmented)
• For wet cutting, always use with water to prevent overheating and extend blade life
• Store in the included metal box in a dry place
• Inspect each disc for cracks or damage before use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting

Drive screws faster and harder with the TACIM16PH233 Impact Screwdriver Bit Set. Engineered specifically for use with impact drivers, these magnetic PH2 bits are made from industrial-grade S2 steel — tough enough to handle the high-torque, high-impact forces that standard bits can't withstand. Packed in a convenient plastic case, this 10-piece set keeps your bits organized and protected on the job site.

Specifications

• Model: TACIM16PH233
• Set: 10 pcs
• Hex Shank: 1/4"
• Size: PH2
• Length: 65mm
• Material: S2 Steel (Magnetic)
• Packaging: Plastic case

Built for Impact Drivers

• Impact-rated S2 steel – absorbs high-torque shock without snapping or stripping
• 1/4" hex shank – universal fit for all standard impact drivers and drills
• Magnetic tip – keeps screws in place for fast, one-handed driving
• Plastic case – keeps all 10 bits organized and easy to carry

10 Pcs Screwdriver Bit Set – TAC16PH233

Keep your screwdriving jobs moving with the TAC16PH233 Screwdriver Bit Set. This industrial-grade 10-piece set features magnetic PH2 bits made from tough S2 steel — the same material used in professional-grade tooling. At 65mm long, these bits give you the reach and torque needed for a wide range of fastening applications, from furniture assembly to construction work.

Specifications

• Model: TAC16PH233
• Set: 10 pcs
• Size: PH2
• Length: 65mm
• Material: S2 Steel (Magnetic)

Key Features

• S2 steel construction – harder and more durable than standard chrome vanadium bits
• Magnetic tip – holds screws securely for one-handed fastening
• 65mm length – ideal for reaching into recessed areas
• 10-piece set – always have a spare ready

10-Pocket Tool Pouch 350x320mm 1680D TOTAL THT16P10125

Large 10-pocket tool pouch with a dedicated hammer holder and D-ring, made from heavy-duty 1680 denier polyester. Belt loop attachment keeps tools within easy reach on the job site. Max load 10kg.

Note: Belt clip is NOT included with this product.

Specifications

Get comprehensive metal drilling coverage with the TACSD0125 HSS Twist Drill Bits Set. This 12-piece set steps through every 0.5mm increment from 2mm to 8mm, giving you the exact size you need for any metal drilling task — from fine pilot holes to larger clearance holes for bolts and fixings.

Specifications

• Model: TACSD0125
• Set: 12 pcs
• Material: HSS (High-Speed Steel)
• Sizes: 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm
• Application: Suitable for drilling on metal surfaces

Product Details

• HSS construction – retains hardness at high temperatures for clean, accurate holes in steel, aluminium, copper, and other metals
• 0.5mm increment sizing – every size from 2mm to 8mm covered, no gaps
• Precision-ground tip for accurate starting and minimal bit wander
• Compatible with standard drill chucks and cordless drills

Materials & Care

• Material: High-Speed Steel (HSS)
• Store in a dry place to prevent corrosion
• Use cutting fluid when drilling hard metals to extend bit life
• Use appropriate drill speed per bit size – smaller bits require higher RPM

13 Pcs Flat Wood Drill Bits Set – TACSD70131

Tackle any wood boring job with the complete TACSD70131 Flat Wood Drill Bits Set. Covering 13 sizes from 6mm to 38mm, this industrial-grade set gives you the versatility to drill clean, flat-bottomed holes in timber, boards, and wood panels — all from a single, well-organized canvas bag. Whether you're a professional carpenter or a serious DIYer, this set has every size you need on the job.

Specifications

• Model: TACSD70131
• Set: 13 pcs
• Shank: 1/4" Hex
• Length: 152mm
• Sizes: 6, 8, 10, 12, 14, 16, 18, 20, 25, 28, 30, 32, 38mm
• Packaging: Canvas bag

Complete Size Range

From the precision of a 6mm bit to the wide bore of a 38mm, this set covers the full spectrum of common flat wood drilling applications — cable routing, door hardware, pipe pass-throughs, and more. The 1/4" hex shank ensures quick, secure bit changes in any compatible drill or driver.

Industrial Grade, Organized Storage

The included canvas bag keeps all 13 bits neatly organized and protected, making it easy to find the right size on site and carry the set wherever the job takes you.

19 Pcs HSS Twist Drill Bits Set – TACSD0195

Drill through metal surfaces with confidence using the TACSD0195 HSS Twist Drill Bits Set. Covering 19 sizes from 1mm to 10mm in 0.5mm increments, this comprehensive set ensures you always have the exact size you need for any metal drilling task. Made from high-speed steel (HSS), each bit is built to withstand the heat and friction of metal drilling while maintaining a sharp, precise cutting edge.

Specifications

• Model: TACSD0195
• Set: 19 pcs
• Material: HSS (High-Speed Steel)
• Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm
• Application: Suitable for drilling on metal surfaces

Complete 1–10mm Range

With sizes stepping up in precise 0.5mm increments, this set covers every common metal drilling requirement — from fine pilot holes to larger clearance holes for bolts and fixings. The full range in one set means no more hunting for individual bits.

Why HSS?

High-speed steel retains its hardness at high temperatures, making it the go-to material for metal drilling. Each bit in this set is precision-ground for accurate, clean holes with minimal wandering — essential when working with steel, aluminium, copper, and other metals.

2-in-1 Air Nailer Ga18 TOTAL TAT81501

The TOTAL TAT81501 handles both brad nails and staples in one compact pneumatic unit. Ideal for trim, upholstery, and panel fastening — with universal connector compatibility and generous included consumables.

Specifications

Product Features

• 2-in-1 functionality: fires both brad nails and staples
• Ga18 gauge for clean, precise fastening
• Compatible with Europe, USA, Nitto, and Italy connector types
• 100pcs load capacity for uninterrupted workflow
• Operates at 0.4–0.7 MPa (60–100 PSI)
• Includes 1000pcs brad nails and 200pcs staples out of the box

2-Jaw Gear Puller 3"

Cr-V steel heavy-duty 2-jaw gear puller with a 2,000kg maximum pulling force. Reliable, controlled extraction of gears, bearings, pulleys, and bushings from shafts in automotive and industrial applications without damaging components.

Specifications

What's in the Box

• 1× TOTAL 2-Jaw Gear Puller 3" (THTGP236)

Materials & Care

• Body: Cr-V steel for exceptional strength and resistance to deformation under high loads
• Apply grease to the screw thread before use for smooth operation
• Do not exceed the rated 2,000kg maximum force
• Inspect jaws and screw for wear before each use; wipe clean and store in a dry environment

2-Jaw Gear Puller 6"

Cr-V steel heavy-duty 2-jaw gear puller with a 5,000kg maximum pulling force. Designed for removing large gears, bearings, pulleys, and bushings from shafts in demanding automotive and industrial applications without damaging components.

Specifications

What's in the Box

• 1× TOTAL 2-Jaw Gear Puller 6" (THTGP266)

Materials & Care

• Body: Cr-V steel for exceptional strength and resistance to deformation under high loads
• Apply grease to the screw thread before use for smooth operation
• Do not exceed the rated 5,000kg maximum force
• Inspect jaws and screw for wear before each use; wipe clean and store in a dry environment

Get everything you need for a well-maintained garden with the THT1593301 3-Piece Garden Shears Set. This complete pruning kit includes a pruning shear, lopper, and hedge shear — all with heat-treated, Teflon-coated blades for smooth, clean cuts and long-lasting performance. From trimming roses to shaping hedges and cutting thick branches, this set handles it all.

What's in the Box

• 1 × Pruning Shear (THT15308) – 205mm (8") – for precise trimming of small branches and stems
• 1 × Lopper (THTS1527416) – 640–860mm (25"–34") adjustable – for cutting thick branches with extended reach
• 1 × Hedge Shear (THTS1516306) – 720–880mm (28"–35") adjustable – for shaping hedges and shrubs

Specifications

• Model: THT1593301
• Blade Treatment: Heat treated & Teflon coated
• Set Contents: Pruning shear + Lopper + Hedge shear

Product Details

• Heat-treated blades – enhanced hardness and edge retention for long service life
• Teflon-coated blades – reduces friction and sap adhesion for smoother, cleaner cuts
• Adjustable lopper and hedge shear – telescopic handles for customisable reach and leverage
• Complete 3-piece set – covers all common garden pruning and shaping tasks

Materials & Care

• Clean blades after each use to remove sap and debris
• Apply a light coat of oil to blades and pivot points to prevent rust
• Store in a dry place away from moisture
• Do not cut branches beyond each tool’s rated capacity
• Always use appropriate PPE (gloves) when operating

3 Pcs Hose Quick Connectors Set – THWS030301

Stop wrestling with your garden hose connections. The THWS030301 Quick Connectors Set gives you everything you need to connect, disconnect, and adapt your garden hose in seconds — no tools, no leaks, no frustration. This handy 3-piece set covers the most common hose connection needs, making it a must-have for any garden setup.

What's Included

• 1x 1/2" Plastic Hose Quick Connector with Water Stop – Automatically stops water flow when disconnected, preventing spills
• 1x 1/2" Plastic Hose Quick Connector – For fast, tool-free hose attachment and removal
• 1x 1/2" Tap Adaptor with 3/4" Tap Adaptor – Dual-size adaptor for compatibility with both 1/2" and 3/4" taps

Why Choose This Set?

Whether you're switching between tools, connecting to different tap sizes, or just want a cleaner, drip-free setup, this 3-piece kit has you covered. The water-stop connector is especially handy — swap attachments without turning off the tap and without getting soaked. Packed on a paper hanger for easy retail display and storage.

Speed up your fastening work with the TAC270831 Magnetic Nut Set. This 3-piece set of 8mm magnetic nut drivers features a strong built-in magnet that holds nuts and bolts securely in place — no more dropped fasteners in tight spaces. The 1/4" hex shank fits any standard drill or impact driver for fast, efficient driving.

Specifications

• Model: TAC270831
• Set: 3 pcs
• Size: 8mm
• Length: 65mm
• Hex Shank: 1/4"
• Material: 50BV30
• Packaging: Sliding card

Product Details

• Strong built-in magnet – holds nuts and bolts firmly for one-handed fastening
• 65mm length – ideal for reaching into recessed areas and deep cavities
• 1/4" hex shank – universal fit for drills, impact drivers, and bit holders
• 3-piece set – always have a spare on hand
• Suitable for assembly, construction, and automotive work

Materials & Care

• Material: 50BV30 steel
• Store in a dry place to prevent corrosion
• Wipe clean after use to maintain magnet strength
• Not recommended for use with impact drivers at maximum torque settings

Drive nuts and bolts faster and more accurately with the TAC270832 Magnetic Nut Set. This 3-piece set of 8mm magnetic nut drivers is made from 50BV30 Cr-V steel with a strong built-in magnet that keeps fasteners locked in place — perfect for overhead work, tight spaces, and anywhere you need one-handed control. The compact 45mm length makes it ideal for standard-depth applications.

Specifications

• Model: TAC270832
• Set: 3 pcs
• Size: 8mm
• Length: 45mm
• Hex Shank: 1/4"
• Material: 50BV30 Chromium-Vanadium Steel (Cr-V, Magnetic)

Product Details

• Strong built-in magnet – holds nuts and bolts firmly for one-handed fastening
• Compact 45mm length – ideal for standard fastening applications with less reach required
• 1/4" hex shank – universal fit for drills, impact drivers, and bit holders
• 3-piece set – always have a spare on hand
• Suitable for assembly, construction, and general maintenance work

Materials & Care

• Material: 50BV30 Chromium-Vanadium Steel (Cr-V)
• Store in a dry place to prevent corrosion
• Wipe clean after use to maintain magnet strength
• Not recommended for use with impact drivers at maximum torque settings

3-Jaw Gear Puller 3"

Cr-V steel heavy-duty 3-jaw gear puller with a 3,000kg maximum pulling force. Balanced three-jaw design for extracting gears, bearings, pulleys, and bushings from shafts in automotive and industrial applications.

Specifications

What's in the Box

• 1× TOTAL 3-Jaw Gear Puller 3" (THTGP336)

Materials & Care

• Body: Cr-V steel for exceptional strength and resistance to deformation under high loads
• Apply grease to the screw thread before use for smooth operation
• Do not exceed the rated 3,000kg maximum force
• Inspect jaws and screw for wear before each use; wipe clean and store in a dry environment

3-Piece Tool Belt Set 12-Pocket 1680D TOTAL THT16P20325

Complete 3-piece tool belt set with 12 pockets, a hammer holder, and D-ring. Includes 2 large pouches and 1 small centre pouch mounted on an adjustable belt (92–127cm) with quick-release clip. Made from heavy-duty 1680 denier polyester. Max load 10kg.

Specifications

4-in-1 Diagonal Cutting Pliers 190mm JADEVER JDPL3778

Premium 7.5" 4-in-1 multi-function diagonal cutting pliers by JADEVER made from Cr-V steel, engineered to save 30% more energy than standard pliers. Combines wire cutting, wire stripping, crimping, and gripping in a single tool for maximum versatility on the job.

Specifications

Product Features

• 4-in-1 multi-function design: wire cutting, wire stripping, crimping, and gripping in one tool
• High-leverage design requires 30% less gripping force than standard pliers
• Premium Cr-V (Chrome Vanadium) steel for superior hardness and durability
• Black finish with polished jaw for corrosion resistance and professional appearance
• Two-color ergonomic handle for comfortable, fatigue-free extended use
• 7.5" (190mm) size provides excellent leverage for demanding electrical tasks

45° Angle Nozzle – TGTAN4501

Reach every corner of your garden with ease using the TGTAN4501 45° Angle Nozzle. Designed to attach directly to the TGTSG026 spray gun and compatible hose reel models, this 590mm angled extension lets you water hanging baskets, under-shrub areas, and hard-to-reach spots without bending or straining. A simple but essential accessory for any serious gardener.

Key Specifications

• Length: 590mm
• Angle: 45°
• Compatible Spray Gun: TGTSG026
• Packed by paper card

Compatible Hose Reel Models

TGT11316 • UTGT11316 • TGT11336 • UTGT11336 • TGT11356 • UTGT11356 • TGT11376 • UTGT11376 • TGT11226 • TGT11246 • UTGT11246

Water Where You Need It

The 45° angle and 590mm length give you the perfect reach and direction to water plants at ground level, in raised beds, or overhead — all without awkward postures. Snap it onto your TGTSG026 spray gun and transform your watering routine.

Tackle any glass or tile drilling job with the right size using the TACSD7256 5 Pcs Glass Drill Bit Set. This industrial-grade set covers five essential diameters — 4mm, 5mm, 6mm, 8mm, and 10mm — giving you the versatility to drill clean, chip-free holes in glass, ceramic tile, porcelain, and glazed surfaces.

Specifications

• Model: TACSD7256
• Set: 5 pcs
• Sizes: 4mm, 5mm, 6mm, 8mm, 10mm
• Application: Glass, ceramic tile, porcelain, glazed surfaces

Product Details

• 5 sizes in one set – 4mm to 10mm covering the most common glass and tile drilling diameters
• Industrial grade – built for professional use on job sites and workshops
• Precision tips for clean, chip-free holes with minimal risk of cracking
• Suitable for glass, ceramic tile, porcelain, and glazed surfaces
• Compatible with standard drill chucks

Materials & Care

• Tip: Carbide
• Use at low speed with light pressure – do not force the bit through the material
• Use water or cutting fluid to cool the tip when drilling glass or porcelain
• Store in a dry place to prevent corrosion
• Inspect tips before each use – replace if chipped or worn
• Always use appropriate PPE (eye protection, gloves) when drilling

Drill clean, accurate holes through concrete, brick, tile, and stone with the TACSD5055 Masonry Drill Bits Set. This 5-piece set covers the most commonly needed masonry sizes, each with a proportional length for optimal stability and reach. A reliable everyday set for both tradespeople and DIYers tackling masonry work.

Specifications

• Model: TACSD5055
• Set: 5 pcs
• Sizes:
• 4mm × 75mm
• 5mm × 85mm
• 6mm × 100mm
• 8mm × 120mm
• 10mm × 120mm

Product Details

• Tungsten carbide tip for hard masonry materials including concrete, brick, block, and stone
• Proportional length-to-diameter sizing for maximum rigidity and drilling accuracy
• Compatible with standard rotary drills and hammer drills
• Covers the most common masonry drilling sizes in one convenient set

Materials & Care

• Tip: Tungsten carbide
• Shank: Standard round shank
• Store in a dry place to prevent corrosion
• Use at appropriate drill speed for masonry – avoid excessive heat buildup
• Inspect tip before each use – replace if chipped or worn

Never let a stripped or broken screw stop your work again. The TACSE0056 Screw Extractor Set gives you 5 sizes of hardened Cr-V extractors to remove damaged, rounded, or snapped fasteners quickly and cleanly. From small screws to large bolts, this set covers the full range of common extraction jobs on the worksite or in the workshop.

Specifications

• Model: TACSE0056
• Set: 5 pcs
• Material: Chromium-Vanadium Steel (Cr-V)
• Hardness: 48–52 HRC
• Thread Type: Coarse thread
• Sizes:
• #1 – 3–6mm
• #2 – 6–8mm
• #3 – 8–11mm
• #4 – 11–14mm
• #5 – 14–18mm

Product Details

• Hardened Cr-V steel at 48–52 HRC – tough enough to bite into damaged fasteners without breaking
• Coarse left-hand thread design – bites deeper as you turn, gripping the damaged screw and backing it out
• 5-size coverage from 3mm to 18mm – handles everything from small machine screws to large structural bolts
• Compatible with standard drill chucks and T-handle tap wrenches

Materials & Care

• Material: Chromium-Vanadium Steel (Cr-V)
• Store in a dry place to prevent rust
• Apply cutting oil when extracting for smoother operation and longer tool life
• Do not use with impact drivers – hand or drill use only

5 Piece Twist Nozzle Set – THHCS05122

Get your garden hose fully set up and ready to go with the THHCS05122 5 Piece Twist Nozzle Set. This all-in-one kit includes everything you need to connect your hose to the tap, switch attachments without water spills, and spray with precision — right out of the box. It's the complete starter kit for any garden hose setup.

What's Included

• 1x 1/2" Plastic Hose Quick Connector with Water Stop – Stops water flow automatically when disconnected — no more drips when swapping tools
• 1x 1/2" Plastic Hose Quick Connector – Fast, tool-free hose connection and removal
• 1x 3/4" Tap Adaptor with 1/2"–3/4" Reducer – Fits both 1/2" and 3/4" taps for universal compatibility
• 1x 5" Snap-in Twist Nozzle – Easy snap-in attachment with adjustable twist spray control

Everything You Need, Nothing You Don't

Whether you're setting up a new hose or replacing worn-out connectors, the THHCS05122 gives you a complete, leak-free system in one convenient package. The snap-in twist nozzle attaches in seconds and lets you adjust your spray from a focused jet to a wide fan with a simple twist. Packed on a paper hanger for easy display and storage.

Keep your crew cutting all day with the TAC22110550 Abrasive Metal Cutting Disc Set. This bulk 50-piece set of 105mm ultra-thin cutting discs is the smart choice for high-volume metalwork — pipes, rebar, sheet metal, angle iron, and more. At just 1.2mm thick, each disc delivers fast, clean cuts with minimal material loss and heat buildup.

Specifications

• Model: TAC22110550
• Set: 50 pcs
• Disc Diameter: 105mm
• Bore: 16mm
• Thickness: 1.2mm
• Application: Metal

Product Details

• Designed for use with 105mm (4") angle grinders
• 1.2mm ultra-thin profile – minimises material loss and reduces heat for cleaner cuts
• 16mm bore – standard fit for most 105mm angle grinders
• Suitable for cutting pipes, rebar, sheet metal, angle iron, and other metal materials
• 50-piece bulk set – ideal for job sites, workshops, and high-volume cutting tasks

Materials & Care

• Application Material: Metal
• Store in a cool, dry place away from moisture and direct sunlight
• Inspect each disc for cracks or damage before use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the grinder's maximum rated speed

Drill through metal surfaces with precision using the TACSD0065 HSS Twist Drill Bits Set. This 6-piece set covers the most commonly needed metal drilling sizes — from fine 2mm pilot holes to robust 8mm clearance holes — all made from high-speed steel for lasting sharpness and reliable performance.

Specifications

• Model: TACSD0065
• Set: 6 pcs
• Material: HSS (High-Speed Steel)
• Sizes: 2mm, 3mm, 4mm, 5mm, 6mm, 8mm
• Application: Suitable for drilling on metal surfaces

Product Details

• HSS construction – retains hardness at high temperatures for clean, accurate holes in steel, aluminium, copper, and other metals
• 6 essential sizes – covers pilot holes, clearance holes, and common fastener sizes in one set
• Precision-ground tip for accurate starting and minimal bit wander
• Compatible with standard drill chucks and cordless drills

Materials & Care

• Material: High-Speed Steel (HSS)
• Store in a dry place to prevent corrosion
• Use cutting fluid when drilling hard metals to extend bit life
• Use appropriate drill speed per bit size – smaller bits require higher RPM

6 Pcs HSS Twist Drill Bits Set – TACSD0801

Get the most commonly used metal drill bit sizes in one compact set with the TACSD0801 HSS Twist Drill Bits Set. Each bit is precision-ground from high-speed steel (HSS) and sized with matching lengths for optimal rigidity and performance — from fine 2mm pilot holes to robust 8mm clearance holes. A reliable, no-fuss set for any metalworking task.

Specifications

• Model: TACSD0801
• Set: 6 pcs
• Material: HSS (High-Speed Steel)
• Sizes & Lengths:
  • 2mm × 49mm
  • 3mm × 61mm
  • 4mm × 75mm
  • 5mm × 86mm
  • 6mm × 93mm
  • 8mm × 117mm
• Application: Suitable for drilling on metal surfaces

Proportional Length Design

Each bit's length is proportional to its diameter — shorter bits for smaller diameters provide stability and accuracy, while longer bits for larger diameters give you the reach you need without flex. This thoughtful sizing makes the TACSD0801 a pleasure to use across steel, aluminium, copper, and other metal surfaces.

6-in-1 Long Nose Pliers 200mm JADEVER JDPL2778

Premium 8" 6-in-1 multi-function long nose pliers by JADEVER made from Cr-V steel, engineered to save 30% more energy than standard pliers. Combines crimping, wire stripping, gripping, nail holding, wire cutting, and bolt turning in a single professional tool.

Specifications

Product Features

• 6-in-1 multi-function design: crimping, wire stripping, gripping, nail holding, wire cutting, and bolt turning
• High-leverage design requires 30% less gripping force than standard pliers
• Long nose jaw for reaching into narrow areas and gripping small components
• Premium Cr-V (Chrome Vanadium) steel for superior hardness and durability
• Black finish with polished jaw for corrosion resistance and professional appearance
• Two-color ergonomic handle for comfortable, fatigue-free extended use
• 8" (200mm) size provides excellent reach and leverage for demanding electrical tasks

Cut clean, precise holes through PVC and wood with the TACSH3071 Hole Saw Set. This 7-piece set covers the most commonly needed hole sizes from 26mm to 63mm, all with a 50mm cutting depth — perfect for cable routing, pipe pass-throughs, door hardware installation, and general woodworking.

Specifications

• Model: TACSH3071
• Set: 7 pcs
• Cutting Depth: 50mm (2")
• Application: PVC & Wood
• Sizes:
• 26mm (1")
• 32mm (1-1/4")
• 38mm (1-1/2")
• 45mm (1-3/4")
• 50mm (2")
• 56mm (2-1/4")
• 63mm (2-1/2")

Product Details

• 7 sizes in one set – 26mm to 63mm covering the most common hole saw diameters
• 50mm cutting depth – suitable for standard timber, panels, and PVC pipe work
• Suitable for PVC and wood – ideal for cable routing, pipe pass-throughs, and door hardware installation
• Compatible with standard drill chucks via arbor (check arbor compatibility with your drill)

Materials & Care

• Application: PVC & Wood
• Store in a dry place to prevent corrosion
• Clear sawdust and debris from teeth after each use to maintain cutting performance
• Inspect teeth before each use – replace if damaged or worn
• Always use appropriate PPE (eye protection, gloves) when cutting