Speed up fastening tasks with the THT102RK086 8-Piece Ratchet Spanner Set. Made from Chromium-Molybdenum alloy steel (CrMo) with a fine polished finish, these industrial-grade ratchet spanners feature a 60–72T ratchet mechanism for precise, efficient tightening and loosening without repositioning — ideal for confined spaces. Covers 8 of the most common metric sizes from 8mm to 19mm.

Specifications

• Model: THT102RK086
• Material: Chromium-Molybdenum alloy steel (CrMo)
• Teeth: 60–72T ratchet
• Finish: Fine polished
• Set Contents: 8 pcs
• Sizes: 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm

Product Details

• Chromium-Molybdenum (CrMo) steel – superior strength, toughness, and fatigue resistance compared to standard Cr-V for heavy-duty applications
• 60–72T ratchet mechanism – fine tooth pitch for precise control and minimal swing arc in tight spaces
• Fine polished finish – corrosion-resistant and professional looking
• Industrial grade – built for demanding workshop, automotive, and mechanical applications
• 8 sizes – 8mm to 19mm covering the most common metric fastener sizes

Materials & Care

• Clean after each use to remove grease and debris from the ratchet mechanism
• Apply a light coat of oil to the ratchet mechanism periodically to maintain smooth operation
• Store in a dry toolbox or spanner roll to protect the finish
• Always use the correct size for the fastener to avoid rounding
• Do not use with extension bars or hammers

Tackle fasteners in recessed and hard-to-reach areas with the THT102486 8-Piece Offset Ring Spanner Set. Made from Chrome-Vanadium (Cr-V) steel for superior strength and durability, the offset ring ends provide knuckle clearance and better torque in confined spaces. Covers 8 dual-size combinations from 6×7mm to 20×22mm for comprehensive workshop and automotive coverage.

Specifications

• Model: THT102486
• Material: Chromium-Vanadium steel (Cr-V)
• Set Contents: 8 pcs
• Sizes: 6×7mm, 8×9mm, 10×11mm, 12×13mm, 14×15mm, 16×17mm, 18×19mm, 20×22mm

Product Details

• Chromium-Vanadium (Cr-V) steel – high-strength alloy for excellent hardness, toughness, and corrosion resistance
• Offset ring ends – angled head provides knuckle clearance and improved torque in tight, recessed spaces
• Dual-size design – two sizes per spanner, 16 size options across 8 pieces
• Industrial grade – built for demanding workshop, automotive, and mechanical applications
• Covers 6mm to 22mm – the most commonly used fastener sizes

Materials & Care

• Clean after each use to remove grease and debris
• Apply a light coat of oil to prevent rust during storage
• Store in a dry toolbox or spanner roll to protect the finish
• Always use the correct size for the fastener to avoid rounding
• Do not use with extension bars or hammers

Handle a full range of fastener sizes with the THT102386 8-Piece Double Open End Spanner Set. Each spanner features two open ends of different sizes, giving you 16 size options across 8 spanners — from 6mm to 22mm. Fine polished finish and plastic hanger packaging make this set a practical addition to any toolbox.

Specifications

• Model: THT102386
• Set Contents: 8 pcs
• Sizes: 6×7mm, 8×9mm, 10×11mm, 12×13mm, 14×15mm, 16×17mm, 18×19mm, 20×22mm
• Size Range: 6–22mm
• Finish: Fine polished
• Packaging: Plastic hanger

Product Details

• 8-piece double open end set – 16 size options across 8 spanners, covering 6mm to 22mm
• Double open end design – two different sizes per spanner for maximum versatility and faster access to fasteners
• Fine polished finish – smooth surface for corrosion resistance and a professional look
• Plastic hanger packaging – easy to store and display
• Suitable for automotive repair, machinery maintenance, plumbing, and general fastening tasks

Materials & Care

• Clean after each use to remove grease and debris
• Apply a light coat of oil to prevent rust during storage
• Store on the plastic hanger or in a dry toolbox to protect the finish
• Always use the correct size spanner for the fastener to avoid rounding
• Do not use with extension bars or hammers

Cover the most common fastener sizes with the THT102286 8-Piece Combination Spanner Set. Spanning 6mm to 19mm, this fine-polished set gives you open-end and ring-end versatility across 8 sizes — everything you need for automotive, mechanical, and general workshop tasks in one convenient pack.

Specifications

• Model: THT102286
• Set Contents: 8 pcs
• Sizes: 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 17mm, 19mm
• Finish: Fine polished
• Packaging: Plastic hanger

Product Details

• 8-piece set – covers 6mm to 19mm, the most commonly used fastener sizes in automotive and workshop applications
• Combination design – open end for speed, ring end for torque in confined spaces
• Fine polished finish – smooth surface for corrosion resistance and a professional look
• Plastic hanger packaging – easy to store and display
• Suitable for automotive repair, machinery maintenance, plumbing, and general fastening tasks

Materials & Care

• Clean after each use to remove grease and debris
• Apply a light coat of oil to prevent rust during storage
• Store on the plastic hanger or in a dry toolbox to protect the finish
• Always use the correct size spanner for the fastener to avoid rounding
• Do not use with extension bars or hammers

Tackle demanding riveting jobs with the THT32105 Industrial Hand Riveter. With a lightweight aluminium body, 10.5" length, and compatibility with four rivet sizes — 2.4mm, 3.2mm, 4mm, and 4.8mm — this industrial-grade riveter delivers consistent, fully-set rivets for automotive, HVAC, and sheet metal fabrication applications.

Specifications

• Model: THT32105
• Body Material: Aluminium
• Length: 10.5"
• Compatible Rivet Diameters: 2.4mm, 3.2mm, 4mm, 4.8mm

Product Details

• Industrial grade – built for regular, heavy-duty riveting tasks on the job site or in the workshop
• Aluminium body – lightweight yet strong, reducing hand fatigue during extended riveting sessions
• 4 rivet sizes supported – 2.4mm, 3.2mm, 4mm, and 4.8mm covering the most common blind rivet diameters
• 10.5" length – good leverage for consistent, fully-set rivets with minimal effort
• Suitable for automotive bodywork, HVAC, sheet metal fabrication, and general assembly

Materials & Care

• Clear spent mandrels from the collection chamber regularly to maintain smooth operation
• Apply a light coat of oil to the moving parts periodically
• Ensure the correct nosepiece is fitted for the rivet diameter being used
• Store in a dry place away from moisture
• Always use appropriate PPE (eye protection) when riveting

Join sheet metal, plastic, and other materials quickly and securely with the THT32108S Hand Riveter. With a lightweight aluminium body, 10.5" length, and compatibility with four rivet sizes — 2.4mm, 3.2mm, 4mm, and 4.8mm — this riveter handles the most common blind rivet sizes used in automotive, HVAC, and general fabrication work.

Specifications

• Model: THT32108S
• Body Material: Aluminium
• Length: 10.5"
• Compatible Rivet Diameters: 2.4mm, 3.2mm, 4mm, 4.8mm

Product Details

• Aluminium body – lightweight yet strong, reducing hand fatigue during extended riveting sessions
• 4 rivet sizes supported – 2.4mm, 3.2mm, 4mm, and 4.8mm covering the most common blind rivet diameters
• 10.5" length – good leverage for consistent, fully-set rivets with minimal effort
• Suitable for automotive bodywork, HVAC, sheet metal fabrication, and general assembly

Materials & Care

• Clear spent mandrels from the collection chamber regularly to maintain smooth operation
• Apply a light coat of oil to the moving parts periodically
• Ensure the correct nosepiece is fitted for the rivet diameter being used
• Store in a dry place away from moisture
• Always use appropriate PPE (eye protection) when riveting

Cut through plastic, rubber, and copper/brass wire with ease using the THT525106 Long Straight Aviation Snip. At 300mm (12"), this extended-length snip gives you greater reach and leverage for cutting flexible and non-ferrous materials up to 0.5mm — a versatile tool for electrical, plumbing, and fabrication work.

Specifications

• Model: THT525106
• Type: Long straight aviation snip
• Length: 300mm (12")
• Max. Cutting Capacity: 0.5mm (plastic, rubber & brass wire)
• Range of Application: Plastic, rubber, copper/brass wire

Product Details

• 300mm (12") length – extended reach for greater leverage and access in tight or deep spaces
• Straight-cut design – clean, precise straight cuts through flexible and non-ferrous materials
• Cuts plastic, rubber, and copper/brass wire up to 0.5mm
• Suitable for electrical, plumbing, HVAC, and general fabrication applications

Materials & Care

• Clean blades after each use to remove debris and residue
• Apply a light coat of oil to the blades and pivot to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials beyond the rated cutting capacity
• Always use appropriate PPE (gloves, eye protection) when cutting

Make clean, precise right-hand cuts through sheet metal with the THT523106 Right Cut Aviation Snip. Crafted from Cr-Mo steel for superior toughness and durability, this 250mm snip cuts stainless steel up to 0.7mm and carbon steel up to 1.2mm — ideal for HVAC, roofing, and sheet metal fabrication where right-hand curves and straight cuts are required.

Specifications

• Model: THT523106
• Type: Right cut aviation snip
• Length: 250mm
• Head Material: Cr-Mo steel (Chrome-Molybdenum)
• Max. Cutting Capacity:
• Stainless steel: 0.7mm
• Carbon steel: 1.2mm
• Packaging: 5 pcs

Product Details

• Right-cut design – ideal for cutting curves to the right and straight cuts in sheet metal
• Cr-Mo steel head – chrome-molybdenum alloy for superior toughness, hardness, and wear resistance
• Cuts stainless steel up to 0.7mm and carbon steel up to 1.2mm – versatile for HVAC, roofing, and fabrication
• 250mm length – good balance of leverage and manoeuvrability
• Colour-coded green handle – standard industry colour for right-cut snips for quick identification

Materials & Care

• Clean blades after each use to remove metal shavings and debris
• Apply a light coat of oil to the blades and pivot to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials beyond the rated cutting capacity
• Always use appropriate PPE (gloves, eye protection) when cutting sheet metal

Cut straight lines through sheet metal with precision using the THT522106 Straight Aviation Snip. At 250mm (10") long, this straight-cut snip handles stainless steel up to 0.5mm and carbon steel up to 1.2mm — a reliable workhorse for HVAC, roofing, and sheet metal fabrication tasks.

Specifications

• Model: THT522106
• Type: Straight cut aviation snip
• Length: 250mm (10")
• Max. Cutting Capacity:
• Stainless steel: 0.5mm
• Carbon steel: 1.2mm

Product Details

• Straight-cut design – ideal for clean, straight cuts through sheet metal
• Cuts stainless steel up to 0.5mm and carbon steel up to 1.2mm – versatile for HVAC, roofing, and fabrication work
• 250mm (10") length – good balance of leverage and manoeuvrability
• Colour-coded yellow handle – standard industry colour for straight-cut snips for quick identification

Materials & Care

• Clean blades after each use to remove metal shavings and debris
• Apply a light coat of oil to the blades and pivot to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials beyond the rated cutting capacity
• Always use appropriate PPE (gloves, eye protection) when cutting sheet metal

Make clean, precise left-hand cuts through sheet metal with the THT521106 Aviation Snip. Featuring a unique two-tone soft grip handle for comfort and control, this left-cut aviation snip is built for HVAC, roofing, and sheet metal fabrication work where curved and straight cuts are required.

Specifications

• Model: THT521106
• Type: Left cut aviation snip
• Handle: Two-tone soft grip (unique design)

Product Details

• Left-cut design – ideal for cutting curves to the left and straight cuts in sheet metal
• Two-tone soft grip handle – comfortable, non-slip grip for controlled cutting with reduced hand fatigue
• Suitable for HVAC, roofing, automotive bodywork, and sheet metal fabrication
• Colour-coded red handle – standard industry colour for left-cut snips for quick identification

Materials & Care

• Clean blades after each use to remove metal shavings and debris
• Apply a light coat of oil to the blades and pivot to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials beyond the tool’s rated capacity
• Always use appropriate PPE (gloves, eye protection) when cutting sheet metal

Cut through plastic, fabric, and cardboard with precision using the THSCRS812108 Rubber Grip Long Blade Scissors. The 210mm titanium-plated stainless steel blade with a serrated bottom edge grips soft and flexible materials as you cut — preventing slipping and delivering clean, controlled results every time. The rubber grip handle reduces fatigue during extended use.

Specifications

• Model: THSCRS812108
• Blade Material: Titanium plated stainless steel
• Size: 210mm (8")
• Blade Thickness: 3.2mm
• Bottom Blade: Serrated
• Application: Plastic, fabric, cardboard

Product Details

• Serrated bottom blade – grips soft and flexible materials to prevent slipping during cutting
• Titanium-plated stainless steel blade – harder and more corrosion-resistant than standard stainless for longer edge retention
• 3.2mm blade thickness – robust enough for industrial cutting tasks
• Rubber grip handle – comfortable, non-slip grip for controlled cutting with reduced hand fatigue
• 210mm (8") length – long blade for extended reach and efficient cutting strokes
• Suitable for plastic, fabric, cardboard, and other soft flexible materials

Materials & Care

• Wipe blades clean after each use to maintain cutting performance
• Apply a light coat of oil to the pivot point periodically
• Store in a dry place to prevent corrosion
• Do not use on materials beyond the rated application range
• Always cut away from the body and keep fingers clear of the blade path

Cut sheet metal cleanly and precisely with the THT524121 12" Tin Snip. Drop-forged from high-quality steel for lasting durability, this snip handles carbon steel up to 0.8mm and stainless steel up to 0.6mm with ease. The extra length gives added leverage for tougher cuts, while the double-dipped grip handle provides comfort and control during extended cutting sessions.

Specifications

• Model: THT524121
• Size: 12"
• Material: Drop-forged steel
• Max. Cutting Thickness:
• Carbon steel: ≤0.8mm
• Stainless steel: ≤0.6mm
• Handle: Double-dipped grip
• Packaging: Half double blister

Product Details

• Drop-forged steel construction – superior strength and durability for long service life
• Cuts carbon steel ≤0.8mm and stainless steel ≤0.6mm – suitable for HVAC, roofing, and sheet metal work
• Double-dipped grip handle – comfortable, non-slip grip for controlled cutting with reduced hand fatigue
• 12" size – extra length for greater leverage on tougher or thicker sheet metal cuts

Materials & Care

• Clean blades after each use to remove metal shavings and debris
• Apply a light coat of oil to the blades to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials exceeding the rated cutting thickness
• Always use appropriate PPE (gloves, eye protection) when cutting sheet metal

Cut sheet metal cleanly and precisely with the THT524101 10" Tin Snip. Drop-forged from high-quality steel for lasting durability, this snip handles carbon steel up to 0.8mm and stainless steel up to 0.6mm with ease. The double-dipped grip handle provides comfort and control during extended cutting sessions.

Specifications

• Model: THT524101
• Size: 10"
• Material: Drop-forged steel
• Max. Cutting Thickness:
• Carbon steel: ≤0.8mm
• Stainless steel: ≤0.6mm
• Handle: Double-dipped grip
• Packaging: Half double blister

Product Details

• Drop-forged steel construction – superior strength and durability for long service life
• Cuts carbon steel ≤0.8mm and stainless steel ≤0.6mm – suitable for HVAC, roofing, and sheet metal work
• Double-dipped grip handle – comfortable, non-slip grip for controlled cutting with reduced hand fatigue
• 10" size – ideal balance of leverage and manoeuvrability for straight and curved cuts

Materials & Care

• Clean blades after each use to remove metal shavings and debris
• Apply a light coat of oil to the blades to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials exceeding the rated cutting thickness
• Always use appropriate PPE (gloves, eye protection) when cutting sheet metal