Drive nuts and bolts faster and more accurately with the TAC270832 Magnetic Nut Set. This 3-piece set of 8mm magnetic nut drivers is made from 50BV30 Cr-V steel with a strong built-in magnet that keeps fasteners locked in place — perfect for overhead work, tight spaces, and anywhere you need one-handed control. The compact 45mm length makes it ideal for standard-depth applications.

Specifications

• Model: TAC270832
• Set: 3 pcs
• Size: 8mm
• Length: 45mm
• Hex Shank: 1/4"
• Material: 50BV30 Chromium-Vanadium Steel (Cr-V, Magnetic)

Product Details

• Strong built-in magnet – holds nuts and bolts firmly for one-handed fastening
• Compact 45mm length – ideal for standard fastening applications with less reach required
• 1/4" hex shank – universal fit for drills, impact drivers, and bit holders
• 3-piece set – always have a spare on hand
• Suitable for assembly, construction, and general maintenance work

Materials & Care

• Material: 50BV30 Chromium-Vanadium Steel (Cr-V)
• Store in a dry place to prevent corrosion
• Wipe clean after use to maintain magnet strength
• Not recommended for use with impact drivers at maximum torque settings

Speed up your fastening work with the TAC270831 Magnetic Nut Set. This 3-piece set of 8mm magnetic nut drivers features a strong built-in magnet that holds nuts and bolts securely in place — no more dropped fasteners in tight spaces. The 1/4" hex shank fits any standard drill or impact driver for fast, efficient driving.

Specifications

• Model: TAC270831
• Set: 3 pcs
• Size: 8mm
• Length: 65mm
• Hex Shank: 1/4"
• Material: 50BV30
• Packaging: Sliding card

Product Details

• Strong built-in magnet – holds nuts and bolts firmly for one-handed fastening
• 65mm length – ideal for reaching into recessed areas and deep cavities
• 1/4" hex shank – universal fit for drills, impact drivers, and bit holders
• 3-piece set – always have a spare on hand
• Suitable for assembly, construction, and automotive work

Materials & Care

• Material: 50BV30 steel
• Store in a dry place to prevent corrosion
• Wipe clean after use to maintain magnet strength
• Not recommended for use with impact drivers at maximum torque settings

Drill multiple hole sizes with a single bit using the TACSD2041 Step Drill Bit Set. This 4-piece kit includes 3 HSS step drill bits covering 4mm to 32mm in 2mm steps, plus a bonus automatic center punch for precise starting points — all packed in a sturdy plastic box. One set, dozens of hole sizes, zero bit changes.

Specifications

• Model: TACSD2041
• Set: 3 pcs step drill bits + 1 pc automatic center punch
• Material: HSS 4341
• Step Increment: 2mm per step
• Bit Sizes:
• Bit 1: 4–12mm (2mm/step)
• Bit 2: 4–20mm (2mm/step)
• Bit 3: 4–32mm (2mm/step)
• Packaging: Plastic box

Product Details

• HSS 4341 steel – high-speed steel alloy for excellent heat resistance and long cutting life
• 2mm step increments – drill precise hole sizes from 4mm up to 32mm without changing bits
• 3 bits for full range coverage – small (4–12mm), medium (4–20mm), and large (4–32mm)
• Automatic center punch included – marks the exact drilling point to prevent bit wander on smooth surfaces
• Ideal for sheet metal, thin steel, aluminium, plastic, and wood

Materials & Care

• Material: HSS 4341 (High-Speed Steel)
• Store in the included plastic box to protect cutting edges
• Apply cutting oil when drilling metal for smoother cuts and longer bit life
• Use at moderate speed – avoid excessive pressure which can chip the steps

Get comprehensive metal drilling coverage with the TACSD0125 HSS Twist Drill Bits Set. This 12-piece set steps through every 0.5mm increment from 2mm to 8mm, giving you the exact size you need for any metal drilling task — from fine pilot holes to larger clearance holes for bolts and fixings.

Specifications

• Model: TACSD0125
• Set: 12 pcs
• Material: HSS (High-Speed Steel)
• Sizes: 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm
• Application: Suitable for drilling on metal surfaces

Product Details

• HSS construction – retains hardness at high temperatures for clean, accurate holes in steel, aluminium, copper, and other metals
• 0.5mm increment sizing – every size from 2mm to 8mm covered, no gaps
• Precision-ground tip for accurate starting and minimal bit wander
• Compatible with standard drill chucks and cordless drills

Materials & Care

• Material: High-Speed Steel (HSS)
• Store in a dry place to prevent corrosion
• Use cutting fluid when drilling hard metals to extend bit life
• Use appropriate drill speed per bit size – smaller bits require higher RPM

Cover all your metal drilling needs with the TACSD0095 HSS Twist Drill Bits Set. This 9-piece set spans 2mm to 10mm with key intermediate sizes included, giving you the right bit for pilot holes, clearance holes, and everything in between. Made from high-speed steel for lasting sharpness on steel, aluminium, copper, and other metal surfaces.

Specifications

• Model: TACSD0095
• Set: 9 pcs
• Material: HSS (High-Speed Steel)
• Sizes: 2mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 8mm, 10mm
• Application: Suitable for drilling on metal surfaces

Product Details

• HSS construction – retains hardness at high temperatures for clean, accurate holes in metal
• 9 carefully selected sizes – includes half-sizes (3.5mm, 4.5mm) for precision fastener and clearance hole matching
• Precision-ground tip for accurate starting and minimal bit wander
• Compatible with standard drill chucks and cordless drills

Materials & Care

• Material: High-Speed Steel (HSS)
• Store in a dry place to prevent corrosion
• Use cutting fluid when drilling hard metals to extend bit life
• Use appropriate drill speed per bit size – smaller bits require higher RPM

Drill through metal surfaces with precision using the TACSD0065 HSS Twist Drill Bits Set. This 6-piece set covers the most commonly needed metal drilling sizes — from fine 2mm pilot holes to robust 8mm clearance holes — all made from high-speed steel for lasting sharpness and reliable performance.

Specifications

• Model: TACSD0065
• Set: 6 pcs
• Material: HSS (High-Speed Steel)
• Sizes: 2mm, 3mm, 4mm, 5mm, 6mm, 8mm
• Application: Suitable for drilling on metal surfaces

Product Details

• HSS construction – retains hardness at high temperatures for clean, accurate holes in steel, aluminium, copper, and other metals
• 6 essential sizes – covers pilot holes, clearance holes, and common fastener sizes in one set
• Precision-ground tip for accurate starting and minimal bit wander
• Compatible with standard drill chucks and cordless drills

Materials & Care

• Material: High-Speed Steel (HSS)
• Store in a dry place to prevent corrosion
• Use cutting fluid when drilling hard metals to extend bit life
• Use appropriate drill speed per bit size – smaller bits require higher RPM

Drill clean, accurate holes through concrete, brick, tile, and stone with the TACSD5055 Masonry Drill Bits Set. This 5-piece set covers the most commonly needed masonry sizes, each with a proportional length for optimal stability and reach. A reliable everyday set for both tradespeople and DIYers tackling masonry work.

Specifications

• Model: TACSD5055
• Set: 5 pcs
• Sizes:
• 4mm × 75mm
• 5mm × 85mm
• 6mm × 100mm
• 8mm × 120mm
• 10mm × 120mm

Product Details

• Tungsten carbide tip for hard masonry materials including concrete, brick, block, and stone
• Proportional length-to-diameter sizing for maximum rigidity and drilling accuracy
• Compatible with standard rotary drills and hammer drills
• Covers the most common masonry drilling sizes in one convenient set

Materials & Care

• Tip: Tungsten carbide
• Shank: Standard round shank
• Store in a dry place to prevent corrosion
• Use at appropriate drill speed for masonry – avoid excessive heat buildup
• Inspect tip before each use – replace if chipped or worn

Never let a stripped or broken screw stop your work again. The TACSE0056 Screw Extractor Set gives you 5 sizes of hardened Cr-V extractors to remove damaged, rounded, or snapped fasteners quickly and cleanly. From small screws to large bolts, this set covers the full range of common extraction jobs on the worksite or in the workshop.

Specifications

• Model: TACSE0056
• Set: 5 pcs
• Material: Chromium-Vanadium Steel (Cr-V)
• Hardness: 48–52 HRC
• Thread Type: Coarse thread
• Sizes:
• #1 – 3–6mm
• #2 – 6–8mm
• #3 – 8–11mm
• #4 – 11–14mm
• #5 – 14–18mm

Product Details

• Hardened Cr-V steel at 48–52 HRC – tough enough to bite into damaged fasteners without breaking
• Coarse left-hand thread design – bites deeper as you turn, gripping the damaged screw and backing it out
• 5-size coverage from 3mm to 18mm – handles everything from small machine screws to large structural bolts
• Compatible with standard drill chucks and T-handle tap wrenches

Materials & Care

• Material: Chromium-Vanadium Steel (Cr-V)
• Store in a dry place to prevent rust
• Apply cutting oil when extracting for smoother operation and longer tool life
• Do not use with impact drivers – hand or drill use only

10 Pcs Screwdriver Bit Set – TAC16PH233

Keep your screwdriving jobs moving with the TAC16PH233 Screwdriver Bit Set. This industrial-grade 10-piece set features magnetic PH2 bits made from tough S2 steel — the same material used in professional-grade tooling. At 65mm long, these bits give you the reach and torque needed for a wide range of fastening applications, from furniture assembly to construction work.

Specifications

• Model: TAC16PH233
• Set: 10 pcs
• Size: PH2
• Length: 65mm
• Material: S2 Steel (Magnetic)

Key Features

• S2 steel construction – harder and more durable than standard chrome vanadium bits
• Magnetic tip – holds screws securely for one-handed fastening
• 65mm length – ideal for reaching into recessed areas
• 10-piece set – always have a spare ready

6 Pcs HSS Twist Drill Bits Set – TACSD0801

Get the most commonly used metal drill bit sizes in one compact set with the TACSD0801 HSS Twist Drill Bits Set. Each bit is precision-ground from high-speed steel (HSS) and sized with matching lengths for optimal rigidity and performance — from fine 2mm pilot holes to robust 8mm clearance holes. A reliable, no-fuss set for any metalworking task.

Specifications

• Model: TACSD0801
• Set: 6 pcs
• Material: HSS (High-Speed Steel)
• Sizes & Lengths:
  • 2mm × 49mm
  • 3mm × 61mm
  • 4mm × 75mm
  • 5mm × 86mm
  • 6mm × 93mm
  • 8mm × 117mm
• Application: Suitable for drilling on metal surfaces

Proportional Length Design

Each bit's length is proportional to its diameter — shorter bits for smaller diameters provide stability and accuracy, while longer bits for larger diameters give you the reach you need without flex. This thoughtful sizing makes the TACSD0801 a pleasure to use across steel, aluminium, copper, and other metal surfaces.

13 Pcs Flat Wood Drill Bits Set – TACSD70131

Tackle any wood boring job with the complete TACSD70131 Flat Wood Drill Bits Set. Covering 13 sizes from 6mm to 38mm, this industrial-grade set gives you the versatility to drill clean, flat-bottomed holes in timber, boards, and wood panels — all from a single, well-organized canvas bag. Whether you're a professional carpenter or a serious DIYer, this set has every size you need on the job.

Specifications

• Model: TACSD70131
• Set: 13 pcs
• Shank: 1/4" Hex
• Length: 152mm
• Sizes: 6, 8, 10, 12, 14, 16, 18, 20, 25, 28, 30, 32, 38mm
• Packaging: Canvas bag

Complete Size Range

From the precision of a 6mm bit to the wide bore of a 38mm, this set covers the full spectrum of common flat wood drilling applications — cable routing, door hardware, pipe pass-throughs, and more. The 1/4" hex shank ensures quick, secure bit changes in any compatible drill or driver.

Industrial Grade, Organized Storage

The included canvas bag keeps all 13 bits neatly organized and protected, making it easy to find the right size on site and carry the set wherever the job takes you.

Brushless Cordless Impact Drill 20V 52Nm

20V P20S brushless cordless impact drill with 52Nm max torque, 30,000bpm max impact rate, and 2-speed settings (0–500 / 0–2,000 rpm). Brushless motor delivers higher efficiency, longer runtime, and extended tool life. Includes 2× 2.0Ah batteries, charger, drill bit set, and Jadever carry case. Model: Jadever JDCDP5281.

Specifications

Features

• Brushless motor for higher efficiency, longer runtime, and extended tool life vs brushed models
• P20S platform — compatible with other Jadever 20V SHARE Li-ion batteries
• 52Nm max torque for heavy-duty drilling and driving in wood, metal, masonry, and concrete
• 30,000bpm impact rate for effective drilling into masonry and concrete
• 2-speed settings (0–500 / 0–2,000 rpm) for versatile drilling and screwdriving
• 2× 2.0Ah batteries for extended runtime and backup power
• Drill bit set included for immediate use out of the box
• Jadever carry case for safe storage and transport
• Built-in LED work light for illuminating dark work areas

Package Contents

• 1 pc Brushless cordless impact drill
• 2 pcs 20V 2.0Ah Li-ion battery
• 1 pc Charger
• 1 set Drill bits
• 1 pc Jadever carry case