Keep your TOTAL 12V cordless tools powered with the TBLI12151 12V 1.5Ah Lithium-Ion Battery Pack. A reliable replacement or spare battery delivering consistent, fade-free power with no memory effect — ideal for light-duty cordless drilling, driving, and cutting tasks.

Specifications

• Model: TBLI12151
• Voltage: 12V
• Capacity: 1.5Ah
• Chemistry: Lithium-Ion

Product Details

• 12V 1.5Ah lithium-ion – consistent power delivery with no memory effect and low self-discharge
• Compact and lightweight – minimises tool weight for reduced fatigue during extended use
• Rechargeable – use with compatible TOTAL 12V charger (sold separately)

Materials & Care

• Store in a cool, dry place away from direct sunlight
• Do not fully discharge – recharge before battery is completely flat to extend lifespan
• Use only with a compatible TOTAL 12V charger
• Do not expose to water or extreme temperatures
• Keep battery contacts clean and free from debris

Power your TOTAL S12 cordless tools with the TBLI12153 S12 Li-ion Battery Pack. This compact 12V 1.5Ah lithium-ion battery charges conveniently via USB Type-C — no dedicated charger needed. Compatible with all TOTAL S12 tools, it’s the ideal backup or replacement battery for light-duty cordless work.

Specifications

• Model: TBLI12153
• Voltage: 12V
• Capacity: 1.5Ah
• Chemistry: Lithium-Ion
• Charging: USB Type-C
• Compatible System: TOTAL S12 cordless tools

Product Details

• USB Type-C charging – charge using any standard USB-C cable, no proprietary charger required
• S12 platform compatible – fits all TOTAL S12 12V cordless power tools
• 12V 1.5Ah lithium-ion – no memory effect, low self-discharge, consistent power delivery
• Compact and lightweight – minimises tool weight for reduced fatigue during use

Materials & Care

• Store in a cool, dry place away from direct sunlight
• Do not fully discharge – recharge before battery is completely flat to extend lifespan
• Charge using a compatible USB Type-C cable only
• Do not expose to water or extreme temperatures
• Keep battery contacts clean and free from debris

Keep your TOTAL M16 cordless tools charged and ready with the TFCLI1613 M16 Li-ion Battery Charger. Designed for the entire TOTAL M16 16V cordless platform, this 1.3A charger delivers safe, reliable charging for all M16 lithium-ion battery packs.

Specifications

• Model: TFCLI1613
• Input Voltage: 220–240V ~ 50/60Hz
• Output: 16V
• Output Current: 1.3A
• Compatible System: TOTAL M16 16V cordless tools

Product Details

• M16 platform compatible – fits all TOTAL M16 16V cordless power tools
• 1.3A output – steady, safe charging for M16 lithium-ion battery packs
• 220–240V input – suitable for standard mains power supply
• Compact and lightweight – easy to store and transport on the job site

Materials & Care

• Store in a cool, dry place away from direct sunlight and moisture
• Do not cover the charger during use – ensure adequate ventilation
• Use only with compatible TOTAL M16 lithium-ion battery packs
• Do not expose to water or extreme temperatures
• Inspect cable and plug before each use – do not use if damaged

Keep your TOTAL M16 cordless tools running all day with the TFBLI1620 16V 2.0Ah Lithium-Ion Battery Pack. Designed exclusively for the TOTAL M16 16V cordless platform, this battery delivers consistent power output with no memory effect — just reliable, fade-free performance from the first charge to the last.

Specifications

• Model: TFBLI1620
• Voltage: 16V
• Capacity: 2.0Ah
• Chemistry: Lithium-Ion
• Compatible System: TOTAL M16 16V cordless tools

Product Details

• 16V 2.0Ah lithium-ion – consistent power delivery with no memory effect and low self-discharge
• M16 platform compatible – fits all TOTAL M16 16V cordless power tools
• Lightweight and compact – minimises tool weight for reduced fatigue during extended use
• Rechargeable – use with compatible TOTAL M16 charger (sold separately)

Materials & Care

• Store in a cool, dry place away from direct sunlight
• Do not fully discharge – recharge before battery is completely flat to extend lifespan
• Use only with a compatible TOTAL M16 charger
• Do not expose to water or extreme temperatures
• Keep battery contacts clean and free from debris

Cut your charging time in half with the TFCLI20411 Fast Intelligent Charger. Delivering 4.0A output, this charger tops up a 2.0Ah P20S battery in just 30 minutes and a 4.0Ah battery in 1 hour — twice as fast as the standard 2A charger. Compatible with all TOTAL P20S 20V cordless tools.

Note: Battery not included.

Specifications

• Model: TFCLI20411
• Input Voltage: 220–240V ~ 50/60Hz
• Output Current: 4.0A
• Charge Time: 2.0Ah battery – approx. 30 mins | 4.0Ah battery – approx. 1 hour
• Compatible Batteries: 2.0Ah Battery Pack, 4.0Ah Battery Pack
• Compatible System: TOTAL P20S 20V
• Battery: Not included

Product Details

• 4.0A fast charging – charges 2.0Ah in ~30 mins and 4.0Ah in ~1 hour for minimal downtime
• Intelligent charger – monitors battery condition for safe, optimised charging
• Universal P20S compatibility – fits all TOTAL P20S 20V cordless power tools
• 220–240V input – suitable for standard mains power supply

Materials & Care

• Store in a cool, dry place away from direct sunlight and moisture
• Do not cover the charger during use – ensure adequate ventilation
• Use only with compatible TOTAL P20S lithium-ion battery packs
• Do not expose to water or extreme temperatures
• Inspect cable and plug before each use – do not use if damaged

Never wait for a battery again with the TCLI2034 Dual Port Fast Intelligent Charger. Unlike standard sequential chargers, this 4000mA powerhouse charges two P20S batteries simultaneously — two 2.0Ah packs in just 30 minutes, or two 4.0Ah packs in 1 hour. Compatible with all TOTAL P20S 20V cordless tools, it’s the ultimate charging solution for busy job sites and professional crews.

Note: Battery not included. Model name is interchangeable between TCLI2024 and TCLI2034 (updated July 2022).

Specifications

• Model: TCLI2034 (also known as TCLI2024)
• Input Voltage: 220–240V ~ 50/60Hz
• Output Current: 4000mA
• Charge Time: Two 2.0Ah batteries – approx. 30 mins | Two 4.0Ah batteries – approx. 1 hour
• Compatible Batteries: 2.0Ah Battery Pack, 4.0Ah Battery Pack
• Compatible System: TOTAL P20S 20V
• Dimensions: 23cm × 16cm × 9cm
• Weight: 0.8kg
• Battery: Not included

Product Details

• Dual port simultaneous charging – charge two batteries at the same time, not one after the other
• 4000mA fast charging – two 2.0Ah packs in ~30 mins, two 4.0Ah packs in ~1 hour
• Intelligent charger – monitors each battery independently for safe, optimised charging
• Universal P20S compatibility – fits all TOTAL P20S 20V cordless power tools
• 220–240V input – suitable for standard mains power supply

Materials & Care

• Store in a cool, dry place away from direct sunlight and moisture
• Do not cover the charger during use – ensure adequate ventilation around both ports
• Use only with compatible TOTAL P20S lithium-ion battery packs
• Do not expose to water or extreme temperatures
• Inspect cable and plug before each use – do not use if damaged

Keep your P20S cordless tools running with the TFCLI2001 Fast Intelligent Charger. Designed for the entire TOTAL P20S 20V cordless platform, this 2000mA charger tops up a 2.0Ah battery in just 1 hour and a 4.0Ah battery in 2 hours — so downtime on the job site is kept to a minimum.

Note: Battery not included.

Specifications

• Model: TFCLI2001
• Input Voltage: 220–240V ~ 50/60Hz
• Output Current: 2000mA
• Charge Time: 2.0Ah battery – approx. 1 hour | 4.0Ah battery – approx. 2 hours
• Compatible Batteries: 2.0Ah Battery Pack, 4.0Ah Battery Pack
• Compatible System: TOTAL P20S 20V
• Battery: Not included

Product Details

• Fast 2000mA charging – fully charges a 2.0Ah pack in ~1 hour, 4.0Ah in ~2 hours
• Intelligent charger – monitors battery condition for safe, optimised charging
• Universal P20S compatibility – fits all TOTAL P20S 20V cordless power tools
• 220–240V input – suitable for standard mains power supply

Materials & Care

• Store in a cool, dry place away from direct sunlight and moisture
• Do not cover the charger during use – ensure adequate ventilation
• Use only with compatible TOTAL P20S lithium-ion battery packs
• Do not expose to water or extreme temperatures
• Inspect cable and plug before each use – do not use if damaged

Power up your entire P20S cordless tool lineup with the TFBCPK2212 P20S Lithium-Ion Battery & Charger Kit. This value kit includes two 20V 2.0Ah lithium-ion battery packs and one charger — giving you continuous runtime by keeping one battery charged while the other is in use. One battery fits all P20S tools, making it the smart investment for any P20S cordless system user.

Specifications

• Model: TFBCPK2212
• Voltage: 20V
• Battery Capacity: 2.0Ah
• Kit Contents: 2 × Lithium-Ion Battery Pack (TFBLI20011) + 1 × Charger (TFCLI2001)
• Compatible System: TOTAL P20S

Product Details

• 2 × 2.0Ah batteries – keep one in the tool, one on charge for uninterrupted workflow
• LED battery power indicator – check remaining charge at a glance without interrupting work
• One battery fits all P20S tools – universal compatibility across the entire TOTAL P20S cordless platform
• 20V lithium-ion chemistry – consistent power delivery with no memory effect and low self-discharge
• Includes TFCLI2001 charger for reliable, safe charging

Materials & Care

• Store batteries in a cool, dry place away from direct sunlight
• Do not fully discharge – recharge before battery is completely flat to extend lifespan
• Use only the included TOTAL charger (TFCLI2001) to charge these batteries
• Do not expose to water or extreme temperatures
• Keep battery contacts clean and free from debris

Secure your drill bits with confidence using the TAC451301.1 Key Chuck. With a 1.5–13mm capacity and 1/2"-20 UNF spindle thread, this keyed chuck delivers positive, reliable bit retention for heavy-duty drilling applications where precision and grip matter most.

Specifications

• Model: TAC451301.1
• Type: Key Chuck (Keyed)
• Chuck Capacity: 1.5mm – 13mm
• Spindle Thread: 1/2"-20 UNF

Product Details

• Keyed chuck design – positive locking for maximum bit retention under heavy-duty drilling loads
• 1.5–13mm capacity – wider range than standard 10mm chucks, accommodating larger drill bit shanks
• 1/2"-20 UNF thread – standard spindle connection for compatible drills
• Suitable for use with compatible drill models requiring 1/2"-20 UNF connection

Materials & Care

• Store in a dry place to prevent corrosion
• Apply light machine oil to the chuck jaws and key mechanism periodically
• Always remove the chuck key before operating the drill
• Inspect jaws regularly – replace if worn or damaged
• Ensure spindle thread is clean before installation

Get a secure, precise grip on every drill bit with the TAC451001 10mm Key Chuck. Featuring a 3/8"-24 UNF spindle thread, screw-thread locking, and a 1.5–10mm capacity, this keyed chuck comes complete with a 60mm chuck key for reliable tightening — ideal for applications where maximum bit retention is critical. Packed in a colour box for easy retail display.

Specifications

• Model: TAC451001
• Type: Key Chuck (Keyed)
• Chuck Capacity: 1.5mm – 10mm
• Connection Size: 3/8"-24 UNF
• Includes: 1 pc 60mm chuck key
• Locking: With screw thread
• Packaging: Colour box

Product Details

• Keyed chuck design – positive locking for maximum bit retention, ideal for heavy-duty drilling
• Screw thread locking – prevents chuck from loosening under load or vibration
• 1.5–10mm capacity – accepts a wide range of drill bit shank sizes
• 3/8"-24 UNF thread – standard connection size for compatible drills
• Includes 60mm chuck key for secure tightening and release

Materials & Care

• Store in a dry place to prevent corrosion
• Apply light machine oil to the chuck jaws and key mechanism periodically
• Keep the chuck key stored safely – do not operate drill without removing the key first
• Inspect jaws regularly – replace if worn or damaged
• Ensure spindle thread is clean before installation

Swap bits fast on your impact drill with the TAC4510201 Keyless Impact Chuck. Featuring a unique design built to handle the high-torque demands of impact drivers, this 10mm keyless chuck accepts 0.8–10mm shanks and fits directly onto TOTAL TIDLI201452, TDLI20508, and TIDLI20508 models — no chuck key needed.

Specifications

• Model: TAC4510201
• Type: Keyless Impact Chuck
• Chuck Capacity: 0.8mm – 10mm (1/32" – 3/8")
• Compatible Models: TIDLI201452, TDLI20508, TIDLI20508
• Packaging: Double blister

Product Details

• Impact-rated design – engineered to withstand the high-torque, high-impact forces of impact drills
• Unique keyless mechanism – tool-free bit changes for faster, more convenient operation on the job
• 0.8–10mm capacity – accepts a wide range of drill bit and accessory shank sizes
• Compatible with TOTAL models: TIDLI201452, TDLI20508, TIDLI20508

Materials & Care

• Store in a dry place to prevent corrosion
• Apply light machine oil to the chuck mechanism periodically to maintain smooth operation
• Inspect jaws regularly – replace if worn or damaged
• Ensure spindle thread is clean before installation

Upgrade your drill with the TAC451016 Keyless Chuck — a quick-change, tool-free chuck replacement with a 0.8mm–10mm capacity and 3/8"-24 UNF spindle thread. Compatible with a wide range of TOTAL drill models, it lets you swap bits fast without fumbling for a chuck key on the job site.

Note: Inner locking screw is NOT provided.

Specifications

• Model: TAC451016
• Chuck Capacity: 0.8mm – 10mm (1/32" – 3/8")
• Spindle Thread: 3/8"-24 UNF
• Compatible Models: TDLI1232, TDLI1241, TDLI1211, TDLI1221, TDLI20025, TDLI1612
• Note: Inner locking screw not included

Product Details

• Keyless design – tool-free bit changes for faster, more convenient operation on the job
• 0.8–10mm capacity – accepts a wide range of drill bit and accessory shank sizes
• 3/8"-24 UNF thread – standard spindle thread for direct replacement on compatible TOTAL drills
• Compatible with TOTAL drill models: TDLI1232, TDLI1241, TDLI1211, TDLI1221, TDLI20025, TDLI1612

Materials & Care

• Store in a dry place to prevent corrosion
• Apply light machine oil to the chuck mechanism periodically to maintain smooth operation
• Inspect jaws regularly – replace if worn or damaged
• Ensure spindle thread is clean before installation
• Inner locking screw must be sourced separately if required

Power through metal, wood, and plastic with the TAC101603 HSS Drill Bit 16mm. This 5-piece pack of large-diameter high-speed steel drill bits delivers reliable performance for heavy-duty drilling tasks on site or in the workshop. With a 178mm total length and 120mm usable length, it provides excellent reach for deep-hole applications.

Specifications

• Model: TAC101603
• Material: HSS (High-Speed Steel)
• Diameter: 16mm
• Total Length: 178mm
• Usable Length: 120mm
• Set: 5 pcs
• Packaging: Poly bag
• Application: Metal, wood, plastic

Product Details

• HSS steel – high-speed steel for reliable performance in metal, wood, and plastic
• 16mm large diameter – ideal for heavy-duty drilling, pipe fitting, and structural work
• 120mm usable length – sufficient reach for deep-hole drilling applications
• 5-piece pack – great value; always have a spare on hand
• Compatible with standard drill chucks

Materials & Care

• Material: HSS (High-Speed Steel)
• Store in a dry place to prevent corrosion
• Use cutting fluid when drilling metal to extend bit life and reduce heat
• Use at appropriate speed – larger diameters require lower RPM
• Inspect tip before each use – resharpen or replace if worn
• Always use appropriate PPE (eye protection, gloves) when drilling

Drill precise, clean holes in metal, wood, and plastic with the TAC1200034 HSS DIN4341 Drill Bit. This 3mm bit comes in a convenient 2-piece set, featuring a 135° split point tip for accurate, self-centring starts without a pilot hole — reducing walking and improving hole precision on a wide range of materials.

Specifications

• Model: TAC1200034
• Material: HSS 4341 (DIN4341)
• Diameter: 3mm
• Point Angle: 135°
• Set: 2 pcs
• Packaging: Double blister
• Application: Metal, wood, plastic

Product Details

• HSS 4341 (DIN4341) steel – high-speed steel with excellent hardness and heat resistance
• 135° split point tip – self-centring for accurate starts without a centre punch or pilot hole
• 2-piece set – always have a spare on hand
• Compatible with standard drill chucks
• Suitable for metal, wood, and plastic

Materials & Care

• Material: HSS 4341 (High-Speed Steel)
• Store in a dry place to prevent corrosion
• Use cutting fluid when drilling metal to extend bit life and reduce heat
• Inspect tip before each use – resharpen or replace if worn
• Always use appropriate PPE (eye protection, gloves) when drilling

Tackle any glass or tile drilling job with the right size using the TACSD7256 5 Pcs Glass Drill Bit Set. This industrial-grade set covers five essential diameters — 4mm, 5mm, 6mm, 8mm, and 10mm — giving you the versatility to drill clean, chip-free holes in glass, ceramic tile, porcelain, and glazed surfaces.

Specifications

• Model: TACSD7256
• Set: 5 pcs
• Sizes: 4mm, 5mm, 6mm, 8mm, 10mm
• Application: Glass, ceramic tile, porcelain, glazed surfaces

Product Details

• 5 sizes in one set – 4mm to 10mm covering the most common glass and tile drilling diameters
• Industrial grade – built for professional use on job sites and workshops
• Precision tips for clean, chip-free holes with minimal risk of cracking
• Suitable for glass, ceramic tile, porcelain, and glazed surfaces
• Compatible with standard drill chucks

Materials & Care

• Tip: Carbide
• Use at low speed with light pressure – do not force the bit through the material
• Use water or cutting fluid to cool the tip when drilling glass or porcelain
• Store in a dry place to prevent corrosion
• Inspect tips before each use – replace if chipped or worn
• Always use appropriate PPE (eye protection, gloves) when drilling

Strip, chip, and demolish concrete, brick walls, and cement with the TAC15221811 SDS Max Flat Chisel. With an 18mm SDS Max shank, 300mm working length, and a 25mm wide flat blade, this industrial-grade chisel delivers broad, controlled impact for surface removal, tile stripping, and heavy demolition on any SDS Max rotary or demolition hammer.

Specifications

• Model: TAC15221811
• Shank: SDS Max
• Diameter: 18mm
• Working Length: 300mm
• Width: 25mm
• Type: Flat
• Application: Concrete, brick walls, cement

Product Details

• SDS Max shank – secure, tool-free connection to SDS Max rotary and demolition hammers
• 25mm flat blade – wider cutting edge for surface stripping, tile removal, and material demolition
• Wear-resistant, high-hardness steel – built for long service life under heavy continuous impact
• 300mm working length – suitable for general demolition and surface preparation tasks
• Suitable for concrete, brick walls, and cement

Materials & Care

• Material: Wear-resistant high-hardness steel
• Store in a dry place to prevent corrosion
• Inspect blade before each use – do not use if cracked or deformed
• Apply light grease to the SDS Max shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when chiselling

Power through concrete, brick walls, and cement with the TAC1521181 SDS Max Pointed Chisel. Built from wear-resistant, high-hardness steel for long service life, this 18×300mm pointed chisel delivers concentrated impact force for heavy-duty breaking and demolition on any SDS Max rotary hammer or demolition hammer.

Specifications

• Model: TAC1521181
• Shank: SDS Max
• Diameter: 18mm
• Working Length: 300mm
• Type: Pointed
• Application: Concrete, brick walls, cement
• Packaging: Plastic hanger

Product Details

• Wear-resistant, high-hardness steel – engineered for long service life under heavy continuous impact
• SDS Max shank – secure, tool-free connection to SDS Max rotary and demolition hammers
• Pointed tip – concentrates impact force for efficient breaking and chipping in concrete and masonry
• 300mm working length – suitable for general demolition and breaking tasks
• Suitable for concrete, brick walls, and cement

Materials & Care

• Material: Wear-resistant high-hardness steel
• Store in a dry place to prevent corrosion
• Inspect tip before each use – do not use if cracked or deformed
• Apply light grease to the SDS Max shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when chiselling

Strip, chip, and demolish concrete, brick walls, and cement surfaces with the TAC15333012 Hex Flat Chisel. Built from wear-resistant, high-hardness steel for long service life, this 30×400mm hex flat chisel features a 35mm wide blade for broader surface coverage — ideal for tile removal, surface preparation, and demolition work.

Specifications

• Model: TAC15333012
• Shank: Hex
• Diameter: 30mm
• Working Length: 400mm
• Width: 35mm
• Type: Flat
• Application: Concrete, brick wall, cement
• Packaging: Plastic tube

Product Details

• Wear-resistant, high-hardness steel – engineered for long service life under heavy impact
• 35mm flat blade – wider cutting edge for surface stripping, tile removal, and material demolition
• 30mm hex shank – secure fit for compatible heavy-duty demolition breakers
• 400mm working length – good reach for wall demolition and surface preparation tasks
• Packed in a protective plastic tube for safe storage and transport

Materials & Care

• Material: Wear-resistant high-hardness steel
• Store in the included plastic tube in a dry place to prevent corrosion
• Inspect blade before each use – do not use if cracked or deformed
• Apply light grease to the shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when breaking

Score, chip, and demolish concrete and brickwork with clean, controlled cuts using the TAC15121411 SDS Plus Flat Chisel. Forged from chromium-molybdenum alloy steel (CrMo) with a sandblast finish, this 20mm wide flat chisel is ideal for general chisel work, surface preparation, and demolition on any SDS Plus rotary hammer.

Specifications

• Model: TAC15121411
• Shank: SDS Plus
• Material: Chromium-Molybdenum Alloy Steel (CrMo)
• Finish: Sandblast
• Diameter: 14mm
• Working Length: 250mm
• Width: 20mm
• Application: Concrete and brickwork demolition, general chisel work

Product Details

• CrMo alloy steel – chromium-molybdenum construction for superior hardness, toughness, and wear resistance
• Sandblast finish – reduces friction and heat buildup during use
• SDS Plus shank – tool-free, secure connection to any SDS Plus rotary hammer
• 20mm flat blade – wider cutting edge for surface removal, tile lifting, and material stripping
• 250mm working length – suitable for general chisel work and demolition tasks

Materials & Care

• Material: Chromium-Molybdenum Alloy Steel (CrMo)
• Finish: Sandblast
• Store in a dry place to prevent corrosion
• Inspect blade before each use – do not use if cracked or deformed
• Apply light grease to the SDS Plus shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when chiselling

Chip, break, and demolish concrete and brickwork with precision using the TAC1511141 SDS Plus Pointed Chisel. Forged from chromium-molybdenum alloy steel (CrMo) with a sandblast finish, this industrial-grade chisel delivers exceptional hardness and toughness for general chisel work and heavy demolition tasks on any SDS Plus rotary hammer.

Specifications

• Model: TAC1511141
• Shank: SDS Plus
• Material: Chromium-Molybdenum Alloy Steel (CrMo)
• Finish: Sandblast
• Diameter: 14mm
• Working Length: 250mm
• Application: Concrete and brickwork demolition, general chisel work

Product Details

• CrMo alloy steel – chromium-molybdenum construction for superior hardness, toughness, and wear resistance
• Sandblast finish – reduces friction and heat buildup during use
• SDS Plus shank – tool-free, secure connection to any SDS Plus rotary hammer
• Pointed tip – concentrates impact force for efficient breaking and chipping in concrete and brick
• 250mm working length – suitable for general chisel work and demolition tasks

Materials & Care

• Material: Chromium-Molybdenum Alloy Steel (CrMo)
• Finish: Sandblast
• Store in a dry place to prevent corrosion
• Inspect tip before each use – do not use if cracked or deformed
• Apply light grease to the SDS Plus shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when chiselling

Break through concrete, brick walls, and cement with confidence using the TAC15333011 Hex Pointed Chisel. Built from wear-resistant, high-hardness steel for long service life, this 30×400mm hex chisel delivers reliable impact performance on heavy demolition and breaking tasks.

Specifications

• Model: TAC15333011
• Shank: Hex
• Diameter: 30mm
• Working Length: 400mm
• Type: Pointed
• Application: Concrete, brick wall, cement
• Packaging: Plastic tube

Product Details

• Wear-resistant, high-hardness steel – engineered for long service life under heavy impact
• Pointed tip – concentrates force for efficient breaking and chipping in concrete, brick, and cement
• 30mm hex shank – secure fit for compatible heavy-duty demolition breakers
• 400mm working length – good reach for wall chasing, breaking, and demolition work
• Packed in a protective plastic tube for safe storage and transport

Materials & Care

• Material: Wear-resistant high-hardness steel
• Store in the included plastic tube in a dry place to prevent corrosion
• Inspect tip before each use – do not use if cracked or deformed
• Apply light grease to the shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when breaking

Tackle heavy-duty demolition with the TAC1531301 Hex Pointed Chisel. With a 30mm hex shank and 410mm working length, this industrial-grade pointed chisel delivers concentrated impact force for breaking through thick concrete, masonry, and hard surfaces. Designed for use with the TOTAL TH215456 and TH217506 demolition breakers.

Specifications

• Model: TAC1531301
• Shank: Hex
• Diameter: 30mm
• Working Length: 410mm
• Compatible Tools: TOTAL TH215456, TOTAL TH217506

Product Details

• 30mm hex shank – secure, high-torque connection to compatible heavy-duty demolition breakers
• Pointed tip – concentrates impact force for breaking, chipping, and demolition in concrete and masonry
• 410mm working length – extended reach for deep breaking and demolition tasks
• Fits TOTAL TH215456 and TH217506 demolition breakers
• Industrial grade – built for heavy-duty, continuous use on demanding job sites

Materials & Care

• Shank: Hex 30mm
• Store in a dry place to prevent corrosion
• Inspect tip before each use – do not use if cracked or deformed
• Apply light grease to the shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when breaking

Break through concrete, masonry, and hard surfaces with precision using the TAC153171 Hex Pointed Chisel. With a 17mm SDS hex shank and 280mm working length, this industrial-grade pointed chisel is designed for use with the TOTAL TH213006 Demolition Breaker — delivering concentrated impact force for chipping, breaking, and demolition work.

Specifications

• Model: TAC153171
• Shank: SDS Hex
• Diameter: 17mm
• Working Length: 280mm
• Compatible Tool: TOTAL TH213006 Demolition Breaker

Product Details

• SDS Hex shank – secure, tool-free connection to compatible demolition breakers
• Pointed tip – concentrates impact force for breaking, chipping, and demolition in concrete and masonry
• 280mm working length – sufficient reach for most demolition and breaking tasks
• 17mm hex diameter – fits TOTAL TH213006 Demolition Breaker
• Industrial grade – built for heavy-duty, continuous use on job sites

Materials & Care

• Shank: SDS Hex
• Store in a dry place to prevent corrosion
• Inspect tip before each use – do not use if cracked or deformed
• Apply light grease to the shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when breaking

Cut clean, precise holes through PVC and wood with the TACSH3071 Hole Saw Set. This 7-piece set covers the most commonly needed hole sizes from 26mm to 63mm, all with a 50mm cutting depth — perfect for cable routing, pipe pass-throughs, door hardware installation, and general woodworking.

Specifications

• Model: TACSH3071
• Set: 7 pcs
• Cutting Depth: 50mm (2")
• Application: PVC & Wood
• Sizes:
• 26mm (1")
• 32mm (1-1/4")
• 38mm (1-1/2")
• 45mm (1-3/4")
• 50mm (2")
• 56mm (2-1/4")
• 63mm (2-1/2")

Product Details

• 7 sizes in one set – 26mm to 63mm covering the most common hole saw diameters
• 50mm cutting depth – suitable for standard timber, panels, and PVC pipe work
• Suitable for PVC and wood – ideal for cable routing, pipe pass-throughs, and door hardware installation
• Compatible with standard drill chucks via arbor (check arbor compatibility with your drill)

Materials & Care

• Application: PVC & Wood
• Store in a dry place to prevent corrosion
• Clear sawdust and debris from teeth after each use to maintain cutting performance
• Inspect teeth before each use – replace if damaged or worn
• Always use appropriate PPE (eye protection, gloves) when cutting