Rotary Hammer 800W

800W SDS+ rotary hammer with 2.5J impact energy and 3-mode operation (drill / hammer drill / chisel) for heavy-duty drilling into concrete, masonry, steel, and wood. Includes auxiliary side handle and carry case. 220–240V / 50–60Hz.

Specifications

What's in the Box

• 1× Rotary Hammer 800W (TH308268)
• 1× Auxiliary side handle
• 1× Carry case

Safety & Care

• Always disconnect from power before changing bits or accessories
• Wear appropriate PPE (safety goggles, gloves, ear protection, dust mask) during use
• Use auxiliary handle for better control during hammer drilling and chiselling
• Keep ventilation slots clean and free from dust buildup
• Store in the carry case in a dry place away from moisture and direct sunlight

Rotary Hammer 650W

650W SDS+ rotary hammer with 1.7J impact energy and 3-mode operation (drill / hammer drill / chisel) for drilling into concrete, masonry, steel, and wood. Includes 3 free SDS+ drill bits, depth gauge, auxiliary side handle, extra carbon brushes, and a carry case. 220–240V / 50–60Hz.

Specifications

What's in the Box

• 1× Rotary Hammer 650W (TH306236)
• 3× SDS+ drill bits (free)
• 1× Depth gauge
• 1× Auxiliary side handle
• 1× Set extra carbon brushes
• 1× Carry case

Safety & Care

• Always disconnect from power before changing bits or accessories
• Wear appropriate PPE (safety goggles, gloves, ear protection, dust mask) during use
• Use auxiliary handle for better control during hammer drilling and chiselling
• Replace carbon brushes when worn to maintain motor performance
• Keep ventilation slots clean and free from dust buildup
• Store in the carry case in a dry place away from moisture and direct sunlight

Full-Body Safety Harness ø14mm×1.95m Lanyard — TOTAL TSH501420

Full-body fall arrest safety harness with a ø14mm×1.95m reflective rope lanyard and integrated energy absorber for shock load reduction. Features 1 dorsal D-ring for fall arrest and 2 waist D-rings for work positioning. Fully adjustable and portable for use at height on construction, industrial, and maintenance sites.

Specifications

What's in the Box

• 1× TOTAL Full-Body Safety Harness (TSH501420)
• 1× ø14mm×1.95m reflective lanyard with energy absorber and snap hook

Safety & Care

• Inspect harness and lanyard before each use; retire immediately if damaged, worn, or after a fall arrest event
• Never use a harness that has arrested a fall — replace immediately
• Store in a cool, dry place away from direct sunlight, chemicals, and heat sources
• Clean with mild soap and water; allow to air dry fully before storage
• Follow local safety regulations and standards for working at height

Welding Safety Goggles DIN 5 Tinted PC Wrap-Around — TOTAL TSP307

Lightweight DIN 5 tinted polycarbonate safety goggles designed for welding applications. Wrap-around style provides a wide visual field with UV and IR protection. CE approved.

Note: Suitable for TIG welding only due to minimal spark and spatter during the process.

Specifications

What's in the Box

• 1× TOTAL Welding Safety Goggles DIN 5 (TSP307)

Materials & Care

• Lens: Polycarbonate — impact resistant with DIN 5 tint for UV/IR protection during welding
• For TIG welding use only — not suitable for MMA or MIG due to high spatter
• Clean lens with a soft, damp cloth; avoid abrasive cleaners
• Inspect lens before each use; replace if scratched or cracked
• Store in a protective pouch or case to prevent scratching

Safety Goggles DIN 4 Tinted PC Wrap-Around — TOTAL TSP305

Lightweight DIN 4 tinted polycarbonate safety goggles with a wide visual field and wrap-around style for comfortable all-day wear. Suitable for light welding, outdoor work, and daily use where glare and UV protection are needed.

Specifications

What's in the Box

• 1× TOTAL Safety Goggles DIN 4 (TSP305)

Materials & Care

• Lens: Polycarbonate — impact resistant with DIN 4 tint for glare and UV reduction
• Clean lens with a soft, damp cloth; avoid abrasive cleaners
• Inspect lens before each use; replace if scratched or cracked
• Store in a protective pouch or case to prevent scratching

Safety Goggles 4-Position Adjustable Temples PC Wrap-Around — TOTAL TSP301

Lightweight polycarbonate safety goggles with 4-position adjustable temple length for a customized, secure fit. Wrap-around style provides unrestricted peripheral vision for indoor and outdoor use. Clear PC lens offers impact and scratch resistance.

Specifications

What's in the Box

• 1× TOTAL Safety Goggles (TSP301)

Materials & Care

• Lens: Polycarbonate — impact and scratch resistant
• Clean lens with a soft, damp cloth; avoid abrasive cleaners
• Inspect lens before each use; replace if scratched or cracked
• Store in a protective pouch or case to prevent scratching

Over-Spec Safety Goggles Full-View PC Wrap-Around — TOTAL TSP304

Full-view polycarbonate safety goggles with a wrap-around style for unrestricted peripheral vision. Designed to fit comfortably over prescription glasses. Clear PC lens provides impact and scratch resistance for indoor and outdoor use.

Specifications

What's in the Box

• 1× TOTAL Over-Spec Safety Goggles (TSP304)

Materials & Care

• Lens: Polycarbonate — impact and scratch resistant
• Clean lens with a soft, damp cloth; avoid abrasive cleaners
• Inspect lens before each use; replace if scratched or cracked
• Store in a protective pouch or case to prevent scratching

Cow Split Leather Work Gloves 10.5" EN388 4133X — TOTAL TSP14101

Durable cow split leather work gloves with double-layer palm reinforcement for extra strength, cotton back for breathability, rubberized cuff for a secure fit, and half lining for comfort. EN388 4133X certified. Suitable for carriers, machining operators, and garden work. Sold as 1 pair.

Specifications

What's in the Box

• 1× Pair TOTAL Cow Split Leather Work Gloves (TSP14101)

Materials & Care

• Palm: Cow split leather — tough and abrasion resistant
• Back: Breathable cotton for ventilation
• Wipe leather clean with a damp cloth; do not machine wash
• Allow to air dry naturally; avoid direct heat sources
• Inspect before each use; replace if leather is cracked or torn

Cut Resistance Gloves XL Level 5 EN388 4X43C — TOTAL TSP1702-XL

Industrial-grade Level 5 cut resistance gloves with high-performance polyethylene (HPPE) shell and polyurethane (PU) coated palm for an excellent balance of comfort, flexibility, and grip. Cut and abrasion resistant with anti-static properties. Ideal for glass handling, timber cutting, and working with heavy sharp objects. Sold as 1 pair.

Specifications

What's in the Box

• 1× Pair TOTAL Cut Resistance Gloves XL (TSP1702-XL)

Materials & Care

• Shell: HPPE for Level 5 cut resistance and anti-static protection
• Palm: PU coating for grip and abrasion resistance
• Hand wash in cold water; do not tumble dry or iron
• Inspect before each use; replace if shell is cut or coating worn through

Nitrile Coated Work Gloves XL EN388 4121X — TOTAL TSP12102

Lightweight nitrile-coated work gloves with smooth and rough-texture palm finish for a secure grip in oily and wet conditions. Breathable nylon liner keeps hands comfortable during extended wear. EN388 4121X certified. Sold as 1 pair.

Specifications

What's in the Box

• 1× Pair TOTAL Nitrile Coated Work Gloves XL (TSP12102)

Materials & Care

• Palm: Nitrile coating for oil and abrasion resistance
• Liner: Breathable nylon knit for all-day comfort
• Hand wash in cold water; do not tumble dry or iron
• Inspect before each use; replace if coating is cracked or worn through

Mechanic Gloves XL EN388 2131X — TOTAL TSP1806-XL

Professional mechanic gloves with microfibre construction and PU leather reinforcement on the palm for extreme abrasion resistance. Rubber backing protects the back of the hand from impact and accidental knocks in low-visibility work environments. EN388 2131X certified. Sold as 1 pair.

Specifications

What's in the Box

• 1× Pair TOTAL Mechanic Gloves XL (TSP1806-XL)

Materials & Care

• Palm: Microfibre with PU leather reinforcement for abrasion resistance
• Back: Breathable mesh with rubber impact protection
• Hand wash in cold water; do not tumble dry or iron
• Inspect before each use; replace if torn or worn through

Auto Darkening Welding Glasses Shade 11 90x35mm — TOTAL TSP9405

Compact auto-darkening welding glasses designed specifically for TIG welding. Features a 90×35mm viewing area, 2 arc sensors with auto ON/OFF, and ultra-fast 0.4–1ms darkening response. Powered by dual CR1025 lithium batteries and a solar panel for extended use. DIN 13 UV/IR protection up to Max. DIN 13.

Note: Suitable for TIG welding only (≥30A) due to minimal spark and spatter during the process.

Specifications

What's in the Box

• 1× TOTAL Auto Darkening Welding Glasses (TSP9405)
• 2× CR1025 lithium batteries (pre-installed)

Materials & Care

• For TIG welding use only — not suitable for MMA or MIG due to high spatter
• Clean lens with a soft, dry cloth; avoid abrasive cleaners
• Replace batteries when auto ON/OFF response slows
• Store in a dry place away from direct sunlight
• Inspect lens before each use; replace if scratched or cracked

Safety Helmet Vented PE 6-Point — TOTAL TSP8602

Lightweight 380g safety helmet made from 100% new PE with top vents for breathability on hot job sites. Features a 6-point V-type suspension harness for a comfortable, secure fit. Builder-safe rated for construction and industrial use.

Specifications

What's in the Box

• 1× TOTAL Safety Helmet (TSP8602)

Materials & Care

• Shell: 100% new PE — impact and penetration resistant
• Inspect shell and harness before each use; replace if cracked or damaged
• Clean with mild soap and water; avoid solvents that degrade PE
• Replace helmet after any significant impact, even if no visible damage
• Do not store in direct sunlight for extended periods — UV degrades PE over time

Digital Caliper 200mm (8") 0.01mm IP54 — TOTAL TMT322006

Precision IP54-rated digital caliper with 0.01mm resolution and a large LCD display for instant metric and inch readings. Hardened stainless steel beam and jaws, metric/inch conversion at any position, and zero-reset function. Comes in a protective plastic carry case.

Specifications

What's in the Box

• 1× TOTAL Digital Caliper 200mm (TMT322006)
• 1× CR2032 battery (pre-installed)
• 1× Plastic carry case

Materials & Care

• Body: Hardened stainless steel beam and jaws
• Wipe clean and dry after each use; IP54 rated but not fully waterproof
• Remove battery if storing long-term to prevent leakage
• Store in the provided case to protect the measuring surfaces
• Do not drop — impact can affect jaw alignment and accuracy

Digital Caliper 150mm (6") 0.01mm IP54 — TOTAL TMT321506

Precision IP54-rated digital caliper with 0.01mm resolution and a large LCD display for instant metric and inch readings. Hardened stainless steel beam and jaws for durability, with zero-reset and mm/inch switching at the press of a button. CE approved. Comes in a protective plastic carry case.

Specifications

What's in the Box

• 1× TOTAL Digital Caliper 150mm (TMT321506)
• 1× CR2032 battery (pre-installed)
• 1× Plastic carry case

Materials & Care

• Body: Hardened stainless steel beam and jaws
• Wipe clean and dry after each use; IP54 rated but not fully waterproof
• Remove battery if storing long-term to prevent leakage
• Store in the provided case to protect the measuring surfaces
• Do not drop — impact can affect jaw alignment and accuracy

Vernier Caliper 200mm (8") 0.05mm — TOTAL TMT312001

Precision 200mm (8") vernier caliper with 0.05mm resolution and dual metric and inch scales. Carbon steel body with smooth sliding jaw and thumb-wheel lock for accurate inside, outside, depth, and step measurements. Comes in a protective plastic carry case.

Specifications

What's in the Box

• 1× TOTAL Vernier Caliper 200mm (TMT312001)
• 1× Plastic carry case

Materials & Care

• Body: Carbon steel with satin chrome finish
• Wipe clean and dry after each use to prevent rust
• Apply a light coat of oil to the beam if storing long-term
• Store in the provided case to protect the measuring surfaces
• Do not drop — impact can affect jaw alignment and accuracy

Vernier Caliper 150mm (6") 0.05mm — TOTAL TMT311501

Precision 150mm (6") vernier caliper with 0.05mm resolution and dual metric and inch scales. Carbon steel body with smooth sliding jaw and thumb-wheel lock for accurate inside, outside, depth, and step measurements. Comes in a protective plastic carry case.

Specifications

What's in the Box

• 1× TOTAL Vernier Caliper 150mm (TMT311501)
• 1× Plastic carry case

Materials & Care

• Body: Carbon steel with satin chrome finish
• Wipe clean and dry after each use to prevent rust
• Apply a light coat of oil to the beam if storing long-term
• Store in the provided case to protect the measuring surfaces
• Do not drop — impact can affect jaw alignment and accuracy

Aluminum Tripod for Laser Level 1.2m — TOTAL TLLT01152

Lightweight yet sturdy 1.2m aluminum tripod designed for TOTAL laser levels. Dual 1/4" and 5/8" spindle threads ensure compatibility with a wide range of laser levels and surveying instruments. Quick-release leg locks for fast setup on any job site.

Specifications

What's in the Box

• 1× TOTAL Aluminum Tripod (TLLT01152)
• 1× 1/4" adapter

Materials & Care

• Legs: Lightweight aluminum with ABS quick-lock clamps
• Feet: Non-slip rubber tips for stability on hard floors
• Wipe clean after use; avoid leaving in wet conditions to prevent corrosion
• Store with legs folded and locked to prevent damage

Self-Levelling Green Laser Level 5-Line 30m — TOTAL TLL305205

Professional 5-line green laser level with 1 horizontal and 4 vertical lines covering a 30m working range. Features cross lock function, laser gain for bright environments, and fast <3s self-levelling. Powered by 4× AA batteries with a hard plastic carry case included.

Specifications

What's in the Box

• 1× TOTAL Green Laser Level (TLL305205)
• 1× Laser safety glasses
• 1× USB charging cable & adapter
• 4× AA batteries
• 1× Hard plastic carry case

Materials & Care

• Class 3R laser — avoid direct eye exposure at all times
• Store in the provided case to protect optics and housing
• Remove batteries if storing for extended periods
• Keep lens clean with a soft, dry cloth; avoid abrasive cleaners
• Compatible tripod: TOTAL TLLT01152 (sold separately)

Cordless 3D Green Laser Level 12-Line 35m 16V — TOTAL TLL301201

Professional cordless 3D green laser level with 12 lines (1×360° horizontal + 2×360° vertical) and a 35m working range. Powered by a 16V 2.0Ah lithium-ion battery with self-levelling, remote control, and a full accessory kit in a hard plastic carry case.

Specifications

What's in the Box

• 1× TOTAL 3D Green Laser Level (TLL301201)
• 1× Magnetic liftable rotating stand
• 1× Rotary base with 3 adjustable feet
• 1× Laser target plate
• 1× Laser safety glasses
• 1× Remote control
• 1× 2.0Ah battery pack (TFBLI1620)
• 1× Charger (TFCLI1613)
• 1× Hard plastic carry case

Materials & Care

• Do not point laser beam at eyes — Class II laser product
• Store in the provided case to protect optics and housing
• Charge battery fully before first use; avoid full discharge for battery longevity
• Keep lens clean with a soft, dry cloth; avoid abrasive cleaners

Heavy-Duty Mason's Spirit Level 60cm — TOTAL TMT221606

Professional 60cm mason's level built for the toughest job sites. Heavy-duty cast aluminum tapered body with finely milled bottom and front surfaces, shock-absorbing rubber strike pads and end caps to handle trowel blows, and 0.5mm/m accuracy for reliable horizontal and vertical readings.

Specifications

What's in the Box

• 1× TOTAL Heavy-Duty Mason's Level 60cm (TMT221606)

Materials & Care

• Body: Cast aluminum with rubber strike pads and end caps
• Wipe clean with a dry cloth; avoid solvents that may damage vials
• Store flat or hanging to preserve vial accuracy
• Do not drop — impact can shift vial calibration

Heavy-Duty Mason's Spirit Level 40cm — TOTAL TMT221406

Professional 40cm mason's level built to withstand the toughest job sites. Heavy-duty cast aluminum tapered body with a finely milled bottom surface, shock-absorbing rubber strike pads and end caps to handle trowel blows, and 0.5mm/m accuracy for reliable horizontal and vertical readings.

Specifications

What's in the Box

• 1× TOTAL Heavy-Duty Mason's Level 40cm (TMT221406)

Materials & Care

• Body: Cast aluminum with rubber strike pads and end caps
• Wipe clean with a dry cloth; avoid solvents that may damage vials
• Store flat or hanging to preserve vial accuracy
• Do not drop — impact can shift vial calibration

Industrial Magnetic Spirit Level 80cm 3-Vial — TOTAL TMT28028M

Industrial-grade 80cm magnetic spirit level with 3 solid vials for horizontal (180°), vertical (90°), and 45° readings. Four built-in strong magnets for hands-free stability on metal surfaces, two precision-milled measuring surfaces on both sides, and heavy-duty rubber end caps. Accuracy: 0.5mm/m.

Specifications

What's in the Box

• 1× TOTAL Industrial Magnetic Spirit Level 80cm (TMT28028M)

Materials & Care

• Body: 1.5mm extruded aluminum with ABS end caps and rubber bumpers
• Wipe clean with a dry cloth; avoid solvents that may damage vials
• Store flat or hanging to preserve vial accuracy
• Do not drop — impact can shift vial calibration

Industrial Magnetic Spirit Level 60cm 3-Vial — TOTAL TMT26028M

Industrial-grade 60cm magnetic spirit level with 3 solid vials for horizontal (180°), vertical (90°), and 45° readings. Built-in strong magnets for hands-free stability on metal surfaces, two precision-milled measuring surfaces on both sides, and heavy-duty rubber end caps. Accuracy: 0.5mm/m.

Specifications

What's in the Box

• 1× TOTAL Industrial Magnetic Spirit Level 60cm (TMT26028M)

Materials & Care

• Body: 1.5mm extruded aluminum with ABS end caps and rubber bumpers
• Wipe clean with a dry cloth; avoid solvents that may damage vials
• Store flat or hanging to preserve vial accuracy
• Do not drop — impact can shift vial calibration

Industrial Magnetic Spirit Level 60cm 3-Vial — TOTAL TMT26028M

Industrial-grade 60cm magnetic spirit level with 3 solid vials for horizontal (180°), vertical (90°), and 45° readings. Built-in strong magnets for hands-free stability on metal surfaces, two precision-milled measuring surfaces on both sides, and heavy-duty rubber end caps. Accuracy: 0.5mm/m.

Specifications

What's in the Box

• 1× TOTAL Industrial Magnetic Spirit Level 60cm (TMT26028M)

Materials & Care

• Body: 1.5mm extruded aluminum with ABS end caps and rubber bumpers
• Wipe clean with a dry cloth; avoid solvents that may damage vials
• Store flat or hanging to preserve vial accuracy
• Do not drop — impact can shift vial calibration

Industrial Magnetic Spirit Level 60cm 3-Vial — TOTAL TMT26086M

Industrial-grade 60cm magnetic spirit level with 3 solid vials for horizontal (180°), vertical (90°), and 45° readings. Built-in strong magnets for hands-free stability on metal surfaces, two precision-milled measuring surfaces on both sides, and heavy-duty rubber end caps. Accuracy: 0.5mm/m.

Specifications

What's in the Box

• 1× TOTAL Industrial Magnetic Spirit Level 60cm (TMT26086M)

Materials & Care

• Body: 1.5mm extruded aluminum with ABS end caps and rubber bumpers
• Wipe clean with a dry cloth; avoid solvents that may damage vials
• Store flat or hanging to preserve vial accuracy
• Do not drop — impact can shift vial calibration

Aluminum Spirit Level 100cm 3-Vial — TOTAL TMT210016

Reliable 100cm aluminum spirit level with 3 solid vials for horizontal (180°), vertical (90°), and 45° readings. 1mm aluminum frame resists warping with heavy-duty shock-absorbing rubber end caps for job site durability. Accuracy: 1mm/m.

Specifications

What's in the Box

• 1× TOTAL Aluminum Spirit Level 100cm (TMT210016)

Materials & Care

• Body: Extruded aluminum frame with ABS end caps and rubber bumpers
• Wipe clean with a dry cloth; avoid solvents that may damage vials
• Store flat or hanging to preserve vial accuracy
• Do not drop — impact can shift vial calibration

Aluminum Spirit Level 80cm 3-Vial — TOTAL TMT28016

Reliable 80cm aluminum spirit level with 3 solid vials for horizontal (180°), vertical (90°), and 45° readings. 1mm aluminum frame resists warping with heavy-duty shock-absorbing rubber end caps for job site durability. Accuracy: 1mm/m.

Specifications

What's in the Box

• 1× TOTAL Aluminum Spirit Level 80cm (TMT28016)

Materials & Care

• Body: Extruded aluminum frame with ABS end caps and rubber bumpers
• Wipe clean with a dry cloth; avoid solvents that may damage vials
• Store flat or hanging to preserve vial accuracy
• Do not drop — impact can shift vial calibration

Industrial Spirit Level 60cm 3-Vial V-Groove — TOTAL TMT26086

Industrial-grade 60cm spirit level with 3 solid vials for horizontal (180°), vertical (90°), and 45° readings. High-accuracy 0.5mm/m tolerance, 1.5mm aluminum frame with two precision-milled measuring surfaces, V-groove bottom for pipe work, and heavy-duty rubber end caps for shock absorption.

Specifications

What's in the Box

• 1× TOTAL Industrial Spirit Level 60cm (TMT26086)

Materials & Care

• Body: 1.5mm extruded aluminum with ABS end caps and rubber bumpers
• Wipe clean with a dry cloth; avoid solvents that may damage vials
• Store flat or hanging to preserve vial accuracy
• Do not drop — impact can shift vial calibration

Aluminum Spirit Level 60cm 2-Vial — TOTAL TMT26036

Sturdy 60cm aluminum spirit level with 2 solid cylinder vials for horizontal and vertical readings. 1mm aluminum profile body with rubber end caps and 1mm/m accuracy for reliable results on construction and finishing work.

Specifications

What's in the Box

• 1× TOTAL Aluminum Spirit Level 60cm (TMT26036)

Materials & Care

• Body: Extruded aluminum frame with ABS end caps and rubber bumpers
• Wipe clean with a dry cloth; avoid solvents that may damage vials
• Store flat or hanging to preserve vial accuracy
• Do not drop — impact can shift vial calibration