Sika Construction Chemicals - Waterproofing, Adhesives & Sealants

	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

High elasticity, one part polyurethane bituminous waterproofing coating

Sika

Sikalastic®-110

(0)

$161.51

Sikalastic®-110

A water-based, one-part modified polyurethane/bituminous coating that forms a highly elastic, seamless, and crack-bridging waterproofing membrane. Easy to apply by roller, brush, or airless spray on horizontal, vertical, and overhead surfaces.

Overview

Specifications

Property	Value
Type	1-part water-based polyurethane/bituminous coating
Ambient Temperature	+5°C min / +40°C max
Substrate Temperature	+5°C min / +40°C max
Relative Humidity	Max. 80% r.h.
Substrate Moisture	<6% pbw (no rising moisture per ASTM D4263)
Curing Time	Min. 48 hours to full cure at +25°C
Waiting Time After Primer	30–60 min (min) / 2 days (max) at +30°C
Waiting Time Between Coats	4–5 hours (min) / 2 days (max) at +30°C
Ready for Screed Overlay	Min. 48 hours after final coat

Usage

Waterproofing membrane for roofs, terraces, and balconies
Below-grade waterproofing for basements and retaining walls
Wet rooms, bathrooms, and podium decks
Surfaces subject to crack movement and structural settlement
Not suitable for water-retaining structures (RC tanks, swimming pools) or areas with permanent water immersion

Advantages

High elasticity and crack-bridging capability
Easy application by roller, brush, or airless spray – including vertical walls and ceilings
Seamless, fully bonded waterproofing membrane
One-part – no mixing required (except dilution for primer coat)
Can be overlaid with cementitious screed after 48 hours

Packaging

20 kg / pail

Colour

Black

Product Details

Product Information

Property	Detail
Composition	Water-based modified polyurethane/bituminous coating (1-part)
Substrate Moisture Limit	<6% pbw – tested via Sika®-Tramex meter, CM measurement, or oven-dry method
Curing Time	Min. 48 hours at +25°C

Technical Information

System	Layer	Product	Consumption
Standard Coating	Primer	Sikalastic®-110 diluted 1:1 with clean water	~0.2 kg/m²
	1st Coat	Sikalastic®-110 undiluted	~0.65 kg/m²
	2nd Coat	Sikalastic®-110 undiluted	~0.65 kg/m²
Reinforced Coating	Primer	Sikalastic®-110 diluted 1:1 with clean water	~0.2 kg/m²
	1st Coat	Sikalastic®-110 undiluted	~0.8 kg/m²
	Reinforcement	Sika® Reemat Premium-120	1 layer
	2nd Coat	Sikalastic®-110 undiluted	~0.5 kg/m²
	3rd Coat	Sikalastic®-110 undiluted	~0.5 kg/m²

Application

Application Information

Parameter	Value
Ambient Temperature	+5°C min / +40°C max
Relative Humidity	Max. 80% r.h.
Substrate Temperature	+5°C min / +40°C max
Substrate Moisture	<6% pbw (no rising moisture – ASTM D4263)
Dew Point	Substrate and uncured membrane must be min. 3°C above dew point
Curing Time	Min. 48 hours at +25°C
Waiting Time After Primer	30–60 min (min) / 2 days (max) at +30°C
Waiting Time Between Coats	4–5 hours (min) / 2 days (max) at +30°C
Ready for Screed Overlay	Min. 48 hours after final coat

Consumption

Standard system: ~1.5 kg/m² total (primer + 2 coats)
Reinforced system: ~2.0 kg/m² total (primer + 3 coats + Reemat reinforcement)
In hot/dry conditions (>40°C, ~50% r.h.), reduce to max. 0.5 kg/m² per coat or apply when temperature is below 35°C
Figures are theoretical and exclude allowances for surface porosity, profile, and wastage

Application Steps

Substrate Preparation: New concrete must be cured min. 28 days with pull-off strength ≥1.5 N/mm². Surface must be dry (<6% moisture), mechanically prepared to open texture, free from standing water, oil, grease, coatings, laitance, and loose material. Remove all existing membranes by industrial vacuuming. Repair blowholes and voids fully.
Mixing: Mix Sikalastic®-110 manually or with a low-speed mixer until completely homogeneous before application.
Standard Coating System: Dilute with 1 part clean water for primer coat (~0.2 kg/m²). Apply by short hair wool roller, brush, or airless spray. Allow to dry, then apply 2 coats of undiluted Sikalastic®-110 (~0.65 kg/m² each), ensuring each coat is completely dry before the next. Allow full system to cure 48 hours before screed overlay.
Reinforced Coating System: Apply primer as above. Apply 1st coat (~0.8 kg/m²) and embed Sika® Reemat Premium-120 into the wet coating. Roll to remove bubbles and creases. Overlap edges min. 50 mm, borders min. 100 mm. Apply 2nd and 3rd coats (~0.5 kg/m² each). Allow 48 hours before screed overlay.
Cleaning: Clean all tools with water immediately after use. Hardened/cured material can only be removed mechanically.

Out of stock

Sika

2-Part Epoxy Protective Coating 12kg Sika Sikagard®-62

(0)

$231.00

Sikagard®-62

A 2-part, rigid, 100% solids high-build epoxy resin protective coating. Solvent-free with excellent mechanical and chemical resistance. Suitable for chemical-resistant lining of storage tanks, silos, and anti-corrosion coating on steel in food processing, sewage, agricultural, and pharmaceutical facilities. CE marked per EN 1504-2 and WRAS approved for contact with potable water.

Overview

Specifications

Property	Value
Type	2-component 100% solids epoxy resin protective coating
Mixing Ratio	Part A : Part B = 3 : 1 (by weight)
Density – Part A	~1.45 kg/L
Density – Part B	~1.02 kg/L
Density – Mixed	~1.37 kg/L
Solid Content	~100%
Shore D Hardness	~80 (DIN 53505)
Tensile Adhesion Strength	>1.5 N/mm² to concrete (ISO 4624)
Layer Thickness	~0.2 mm per layer
Consumption	~0.30 kg/m² per layer
Temperature Resistance (permanent)	+50°C dry heat
Temperature Resistance (max. 7 days)	+80°C
Temperature Resistance (max. 12 hours)	+100°C
Shelf Life	12 months (Part A and Part B) from date of production
Storage	Dry, +5°C to +30°C, original sealed packaging, away from direct sunlight

Mechanical Resistance (Taber Abraser)

Test Condition	Result
CS 10 / 1000 / 1000	24.4 mg
CS 17 / 1000 / 1000	70 mg
H 22 / 1000 / 1000	560.6 mg

Usage

Chemical resistant protective layer on concrete, stone, cementitious mortars, epoxy cement, epoxy resin products, and steel
Lining in storage tanks and silos
Anti-corrosion coating on steel in food processing plants, sewage works, farms, agricultural enterprises, chemical and pharmaceutical facilities, and beverage industry

Advantages

Solvent free – 100% solids
Good mechanical and chemical resistance
High build – ~0.2 mm per layer
Impervious to liquids
Easy to mix and apply
CE marked per EN 1504-2 (concrete protection)
WRAS approved for contact with potable water (BS 6920-1:2000)
LEED v2009 IEQc 4.2 compliant

Packaging

12 kg set (Part A + Part B)

Colour

RAL 7032 (Pebble Grey) – other colours on request

Product Details

Product Information

Property	Detail
Composition	Epoxy resin (2-component, 100% solids)
Shelf Life	12 months from date of production (Part A and Part B)
Storage Conditions	Dry, +5°C to +30°C, original sealed packaging, protected from direct sunlight

Pot Life

Temperature	Pot Life
+10°C	~30 minutes
+20°C	~20 minutes
+30°C	~10 minutes

Waiting Time / Overcoating & Full Cure

Temperature	Min. Overcoating	Max. Overcoating	Full Cure
+10°C	~30 hours	~3 days	~14 days
+20°C	~10 hours	~2 days	~10 days
+30°C	~6 hours	~1 day	~5 days

Application

Application Information

Parameter	Value
Mixing Ratio	Part A : Part B = 3 : 1 (by weight)
Layer Thickness	~0.2 mm per layer
Consumption	~0.30 kg/m² per layer
Ambient Temperature	+8°C min / +40°C max
Substrate Temperature	+8°C min / +40°C max (min. 3°C above dew point)
Relative Humidity	<80%

Application Steps

Substrate Preparation – Concrete: Prepare mechanically to achieve an open-textured surface. Remove weak areas, expose blowholes and voids. Remove all dust and loose material by brush and/or vacuum. Fill open voids with a suitable Sika® pore filling mortar. Level surface roughness with a suitable Sika® rendering and levelling mortar. Use a suitable primer on high-absorbent, non-sound, or non-cement-based substrates.
Substrate Preparation – Steel: Abrasive blast clean to SSPC-SP 10 “near white metal” or Sa 2½ (ISO EN 12944-4). Prepare welds and joints per EN 14879 Part 1. Remove all dust, dirt, and blasting material. Use air-conditioning to maintain surface conditions after blast cleaning.
Mixing: Stir Part A mechanically before use. Add all of Part B to Part A and mix continuously for 3 minutes using a low-speed stirrer (300–400 rpm) to avoid air entrapment. Pour into a clean container and stir again to ensure thorough mixing. Use only within the pot life.
Application: Apply by brush, roller, or airless spray at ~0.30 kg/m² per layer (~0.2 mm DFT). Apply multiple coats as required within the overcoating window.
Cleaning: Clean all tools immediately with Thinner C. Hardened/cured material can only be removed mechanically.

Out of stock

Sika

Sikafloor®-264 HC

(0)

$245.00

Sikafloor®-264 HC

A 2-part epoxy coloured floor coating providing a hard-wearing, seamless, low-maintenance gloss finish. Suitable as a roller coat for storage halls, workshops, and garages, or as a seal coat for broadcast systems in car parks, hangars, and wet process areas. Liquid proof with good chemical and mechanical resistance.

Overview

Specifications

Property	Value
Type	2-component epoxy floor coating
Mixing Ratio	Part A : Part B = 79 : 21 (by weight)
Density – Part A	~1.64 kg/L
Density – Part B	~1.00 kg/L
Density – Mixed	~1.40 kg/L
Solid Content	~100% by mass and volume
Shore D Hardness	~76 (7 days at +23°C, DIN 53505)
Abrasion Resistance	41 mg (CS 10/1000/1000, 7 days at +23°C, DIN 53109)
Compressive Strength	~53 N/mm² (28 days at +23°C, EN 196-1)
Flexural Strength	~20 N/mm² (28 days at +23°C, EN 196-1)
Tensile Adhesion Strength	>1.5 N/mm² (failure in concrete, ISO 4624)
Temperature Resistance (permanent)	+50°C dry heat
Temperature Resistance (short-term)	+80°C (max. 7 days); +100°C (max. 12 hours)
Shelf Life	24 months from date of production
Storage	Dry, +18°C to +30°C, original sealed packaging

Usage

Roller coat for concrete and cement screeds with normal to medium-heavy wear
Storage and assembly halls, maintenance workshops, garages, and loading ramps
Seal coat for broadcast systems in multi-storey and underground car parks
Maintenance hangars and wet process areas (beverage and food industry)

Advantages

Good chemical and mechanical resistance
Easy application by roller, squeegee, or brush
Liquid proof
Gloss finish
Slip-resistant surface possible (when broadcast with aggregate)
LEED v4 EQ credit compliant – low-emitting materials
Good biological resistance (ISO 846)

Packaging

20 kg set (Part A + Part B)
10 kg set (Part A + Part B)

Colour

Part A (Resin): Coloured liquid – available in multiple RAL colour shades
Part B (Hardener): Transparent liquid
Note: Under direct UV exposure, some discolouration may occur – no effect on performance

Product Details

Product Information

Property	Detail
Composition	Epoxy (2-component)
Shelf Life	24 months from date of production
Storage Conditions	Dry, +18°C to +30°C, original sealed packaging
Solid Content	~100% by mass and volume

Technical Information – Consumption

System	Layer	Product	Consumption
Roller Coating	Primer	1–2 × Sikafloor®-161 HC	0.35–0.55 kg/m² per layer
Roller Coating	Top Coat	2 × Sikafloor®-264 HC	0.3–0.5 kg/m² per layer
Textured Roller Coating	Primer	1–2 × Sikafloor®-161 HC	0.35–0.55 kg/m² per layer
Textured Roller Coating	Top Coat	1–2 × Sikafloor®-264 HC + 1% bw Extender T	0.5–0.8 kg/m² per layer
Broadcast System (~4 mm)	Primer	1 × Sikafloor®-161 HC	0.35–0.5 kg/m²
	Wearing Course	1 pbw Sikafloor®-264 HC + 1 pbw quartz sand (0.1–0.3 mm)	~4 kg/m² (~2 kg/m² binder + ~2 kg/m² sand)
	Broadcasting	Quartz sand 0.4–0.7 mm	~4–6 kg/m²
	Top Coat	1–2 × Sikafloor®-264 HC	0.6–0.8 kg/m² per layer

Pot Life

Temperature	Pot Life
+10°C	~50 minutes
+20°C	~25 minutes
+30°C	~15 minutes

Curing & Ready for Use

Temperature	Foot Traffic	Light Traffic	Full Cure
+10°C	~72 hours	~6 days	~10 days
+20°C	~24 hours	~4 days	~7 days
+30°C	~18 hours	~2 days	~5 days

Application

Application Information

Parameter	Value
Mixing Ratio	Part A : Part B = 79 : 21 (by weight)
Ambient Temperature	+10°C min / +30°C max
Substrate Temperature	+10°C min / +30°C max
Relative Humidity	Max. 80% r.h.
Substrate Moisture	<4% pbw (no rising moisture per ASTM polyethylene sheet test)
Dew Point	Substrate must be min. 3°C above dew point

Application Steps

Mixing: Stir Part A mechanically before use. Add all of Part B to Part A and mix continuously for 3 minutes at 300–400 rpm until uniform. Pour into a clean container and mix again. Avoid over-mixing to minimise air entrainment.
Primer: Apply Sikafloor®-161 HC by brush, roller, or squeegee. Preferred method: squeegee then back-roll crosswise. Apply two coats if needed to achieve a continuous, pore-free coat.
Levelling: Level rough surfaces using Sikafloor®-161 HC levelling mortar before applying coating.
Coating Application: Apply Sikafloor®-264 HC by short-piled roller crosswise in two coats.
Seal Coat: Apply by squeegee then back-roll crosswise with a short-piled roller.
Cleaning (Tools): Clean all tools immediately with Thinner C. Hardened material can only be removed mechanically.
Floor Maintenance: Remove spillages immediately. Clean regularly using rotary brush, mechanical scrubbers, high-pressure washer, or scrubber-dryer with suitable detergents.

Out of stock

Showing 33/33

SIKA

Sika is a global leader in specialty chemicals for construction, with over 110 years of expertise trusted by engineers, contractors, and builders worldwide. At ESE Mall Construction Hub, our Sika collection covers the full spectrum of construction chemical solutions including waterproofing coatings and membranes, epoxy adhesives and floor coatings, tile adhesives and grouts, joint sealants, concrete admixtures, repair mortars, anchoring adhesives, expanding foam, bonding agents, and concrete hardeners. Whether you're waterproofing a basement, repairing concrete, laying tiles, or sealing joints, Sika delivers certified, high-performance solutions built for Cambodia's climate and construction demands.

All Categories

Product Comparison

SIKA

All Categories

Explore Related Collections

SIKA