Strip, chip, and demolish concrete, brick walls, and cement with the TAC15221811 SDS Max Flat Chisel. With an 18mm SDS Max shank, 300mm working length, and a 25mm wide flat blade, this industrial-grade chisel delivers broad, controlled impact for surface removal, tile stripping, and heavy demolition on any SDS Max rotary or demolition hammer.

Specifications

• Model: TAC15221811
• Shank: SDS Max
• Diameter: 18mm
• Working Length: 300mm
• Width: 25mm
• Type: Flat
• Application: Concrete, brick walls, cement

Product Details

• SDS Max shank – secure, tool-free connection to SDS Max rotary and demolition hammers
• 25mm flat blade – wider cutting edge for surface stripping, tile removal, and material demolition
• Wear-resistant, high-hardness steel – built for long service life under heavy continuous impact
• 300mm working length – suitable for general demolition and surface preparation tasks
• Suitable for concrete, brick walls, and cement

Materials & Care

• Material: Wear-resistant high-hardness steel
• Store in a dry place to prevent corrosion
• Inspect blade before each use – do not use if cracked or deformed
• Apply light grease to the SDS Max shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when chiselling

Power through concrete, brick walls, and cement with the TAC1521181 SDS Max Pointed Chisel. Built from wear-resistant, high-hardness steel for long service life, this 18×300mm pointed chisel delivers concentrated impact force for heavy-duty breaking and demolition on any SDS Max rotary hammer or demolition hammer.

Specifications

• Model: TAC1521181
• Shank: SDS Max
• Diameter: 18mm
• Working Length: 300mm
• Type: Pointed
• Application: Concrete, brick walls, cement
• Packaging: Plastic hanger

Product Details

• Wear-resistant, high-hardness steel – engineered for long service life under heavy continuous impact
• SDS Max shank – secure, tool-free connection to SDS Max rotary and demolition hammers
• Pointed tip – concentrates impact force for efficient breaking and chipping in concrete and masonry
• 300mm working length – suitable for general demolition and breaking tasks
• Suitable for concrete, brick walls, and cement

Materials & Care

• Material: Wear-resistant high-hardness steel
• Store in a dry place to prevent corrosion
• Inspect tip before each use – do not use if cracked or deformed
• Apply light grease to the SDS Max shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when chiselling

Strip, chip, and demolish concrete, brick walls, and cement surfaces with the TAC15333012 Hex Flat Chisel. Built from wear-resistant, high-hardness steel for long service life, this 30×400mm hex flat chisel features a 35mm wide blade for broader surface coverage — ideal for tile removal, surface preparation, and demolition work.

Specifications

• Model: TAC15333012
• Shank: Hex
• Diameter: 30mm
• Working Length: 400mm
• Width: 35mm
• Type: Flat
• Application: Concrete, brick wall, cement
• Packaging: Plastic tube

Product Details

• Wear-resistant, high-hardness steel – engineered for long service life under heavy impact
• 35mm flat blade – wider cutting edge for surface stripping, tile removal, and material demolition
• 30mm hex shank – secure fit for compatible heavy-duty demolition breakers
• 400mm working length – good reach for wall demolition and surface preparation tasks
• Packed in a protective plastic tube for safe storage and transport

Materials & Care

• Material: Wear-resistant high-hardness steel
• Store in the included plastic tube in a dry place to prevent corrosion
• Inspect blade before each use – do not use if cracked or deformed
• Apply light grease to the shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when breaking

Score, chip, and demolish concrete and brickwork with clean, controlled cuts using the TAC15121411 SDS Plus Flat Chisel. Forged from chromium-molybdenum alloy steel (CrMo) with a sandblast finish, this 20mm wide flat chisel is ideal for general chisel work, surface preparation, and demolition on any SDS Plus rotary hammer.

Specifications

• Model: TAC15121411
• Shank: SDS Plus
• Material: Chromium-Molybdenum Alloy Steel (CrMo)
• Finish: Sandblast
• Diameter: 14mm
• Working Length: 250mm
• Width: 20mm
• Application: Concrete and brickwork demolition, general chisel work

Product Details

• CrMo alloy steel – chromium-molybdenum construction for superior hardness, toughness, and wear resistance
• Sandblast finish – reduces friction and heat buildup during use
• SDS Plus shank – tool-free, secure connection to any SDS Plus rotary hammer
• 20mm flat blade – wider cutting edge for surface removal, tile lifting, and material stripping
• 250mm working length – suitable for general chisel work and demolition tasks

Materials & Care

• Material: Chromium-Molybdenum Alloy Steel (CrMo)
• Finish: Sandblast
• Store in a dry place to prevent corrosion
• Inspect blade before each use – do not use if cracked or deformed
• Apply light grease to the SDS Plus shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when chiselling

Chip, break, and demolish concrete and brickwork with precision using the TAC1511141 SDS Plus Pointed Chisel. Forged from chromium-molybdenum alloy steel (CrMo) with a sandblast finish, this industrial-grade chisel delivers exceptional hardness and toughness for general chisel work and heavy demolition tasks on any SDS Plus rotary hammer.

Specifications

• Model: TAC1511141
• Shank: SDS Plus
• Material: Chromium-Molybdenum Alloy Steel (CrMo)
• Finish: Sandblast
• Diameter: 14mm
• Working Length: 250mm
• Application: Concrete and brickwork demolition, general chisel work

Product Details

• CrMo alloy steel – chromium-molybdenum construction for superior hardness, toughness, and wear resistance
• Sandblast finish – reduces friction and heat buildup during use
• SDS Plus shank – tool-free, secure connection to any SDS Plus rotary hammer
• Pointed tip – concentrates impact force for efficient breaking and chipping in concrete and brick
• 250mm working length – suitable for general chisel work and demolition tasks

Materials & Care

• Material: Chromium-Molybdenum Alloy Steel (CrMo)
• Finish: Sandblast
• Store in a dry place to prevent corrosion
• Inspect tip before each use – do not use if cracked or deformed
• Apply light grease to the SDS Plus shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when chiselling

Break through concrete, brick walls, and cement with confidence using the TAC15333011 Hex Pointed Chisel. Built from wear-resistant, high-hardness steel for long service life, this 30×400mm hex chisel delivers reliable impact performance on heavy demolition and breaking tasks.

Specifications

• Model: TAC15333011
• Shank: Hex
• Diameter: 30mm
• Working Length: 400mm
• Type: Pointed
• Application: Concrete, brick wall, cement
• Packaging: Plastic tube

Product Details

• Wear-resistant, high-hardness steel – engineered for long service life under heavy impact
• Pointed tip – concentrates force for efficient breaking and chipping in concrete, brick, and cement
• 30mm hex shank – secure fit for compatible heavy-duty demolition breakers
• 400mm working length – good reach for wall chasing, breaking, and demolition work
• Packed in a protective plastic tube for safe storage and transport

Materials & Care

• Material: Wear-resistant high-hardness steel
• Store in the included plastic tube in a dry place to prevent corrosion
• Inspect tip before each use – do not use if cracked or deformed
• Apply light grease to the shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when breaking

Tackle heavy-duty demolition with the TAC1531301 Hex Pointed Chisel. With a 30mm hex shank and 410mm working length, this industrial-grade pointed chisel delivers concentrated impact force for breaking through thick concrete, masonry, and hard surfaces. Designed for use with the TOTAL TH215456 and TH217506 demolition breakers.

Specifications

• Model: TAC1531301
• Shank: Hex
• Diameter: 30mm
• Working Length: 410mm
• Compatible Tools: TOTAL TH215456, TOTAL TH217506

Product Details

• 30mm hex shank – secure, high-torque connection to compatible heavy-duty demolition breakers
• Pointed tip – concentrates impact force for breaking, chipping, and demolition in concrete and masonry
• 410mm working length – extended reach for deep breaking and demolition tasks
• Fits TOTAL TH215456 and TH217506 demolition breakers
• Industrial grade – built for heavy-duty, continuous use on demanding job sites

Materials & Care

• Shank: Hex 30mm
• Store in a dry place to prevent corrosion
• Inspect tip before each use – do not use if cracked or deformed
• Apply light grease to the shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when breaking

Break through concrete, masonry, and hard surfaces with precision using the TAC153171 Hex Pointed Chisel. With a 17mm SDS hex shank and 280mm working length, this industrial-grade pointed chisel is designed for use with the TOTAL TH213006 Demolition Breaker — delivering concentrated impact force for chipping, breaking, and demolition work.

Specifications

• Model: TAC153171
• Shank: SDS Hex
• Diameter: 17mm
• Working Length: 280mm
• Compatible Tool: TOTAL TH213006 Demolition Breaker

Product Details

• SDS Hex shank – secure, tool-free connection to compatible demolition breakers
• Pointed tip – concentrates impact force for breaking, chipping, and demolition in concrete and masonry
• 280mm working length – sufficient reach for most demolition and breaking tasks
• 17mm hex diameter – fits TOTAL TH213006 Demolition Breaker
• Industrial grade – built for heavy-duty, continuous use on job sites

Materials & Care

• Shank: SDS Hex
• Store in a dry place to prevent corrosion
• Inspect tip before each use – do not use if cracked or deformed
• Apply light grease to the shank before insertion to reduce wear
• Always use appropriate PPE (eye protection, gloves, safety boots) when breaking

Cut clean, precise holes through PVC and wood with the TACSH3071 Hole Saw Set. This 7-piece set covers the most commonly needed hole sizes from 26mm to 63mm, all with a 50mm cutting depth — perfect for cable routing, pipe pass-throughs, door hardware installation, and general woodworking.

Specifications

• Model: TACSH3071
• Set: 7 pcs
• Cutting Depth: 50mm (2")
• Application: PVC & Wood
• Sizes:
• 26mm (1")
• 32mm (1-1/4")
• 38mm (1-1/2")
• 45mm (1-3/4")
• 50mm (2")
• 56mm (2-1/4")
• 63mm (2-1/2")

Product Details

• 7 sizes in one set – 26mm to 63mm covering the most common hole saw diameters
• 50mm cutting depth – suitable for standard timber, panels, and PVC pipe work
• Suitable for PVC and wood – ideal for cable routing, pipe pass-throughs, and door hardware installation
• Compatible with standard drill chucks via arbor (check arbor compatibility with your drill)

Materials & Care

• Application: PVC & Wood
• Store in a dry place to prevent corrosion
• Clear sawdust and debris from teeth after each use to maintain cutting performance
• Inspect teeth before each use – replace if damaged or worn
• Always use appropriate PPE (eye protection, gloves) when cutting

Expand the versatility of your die grinder with the TAKB0502 Die Grinder Accessories Set. This 5-piece kit covers the most common grinding and shaping profiles — cylindrical, bullet, cone, T-type, and round — giving you the right shape for deburring, porting, shaping, and finishing in tight spaces. Designed for use with the TOTAL TG55061 Die Grinder.

Specifications

• Model: TAKB0502
• Set: 5 pcs
• Compatible Tool: TOTAL TG55061 Die Grinder
• Included Pieces:
• 1 pc Cylindrical – 16×25mm
• 1 pc Bullet Type – 20×21mm
• 1 pc Cone – 20×32mm
• 1 pc T-Type – 24×10mm
• 1 pc Round – 20×20mm
• Packaging: Sliding card and color box

Product Details

• 5 grinding profiles – cylindrical, bullet, cone, T-type, and round for versatile shaping and finishing
• Designed for use with the TOTAL TG55061 Die Grinder
• Ideal for deburring, porting, grinding, and surface finishing in confined spaces
• Each piece sized for precise control in detailed grinding work

Materials & Care

• Store in a dry place to prevent corrosion
• Inspect each piece before use – do not use if cracked or chipped
• Use at the correct speed for your die grinder – do not exceed rated RPM
• Always use appropriate PPE (eye protection, gloves) when grinding

Convert your SDS Plus rotary hammer into a powerful core drilling machine with the TAC43A13501 SDS Plus Adaptor. At 350mm long with an M22 thread, this adaptor connects TOTAL TCT hole core bits (50mm–100mm) directly to any SDS Plus hammer drill — no dedicated core drill machine required. Includes an 8×110mm masonry pilot bit for accurate hole starting.

Specifications

• Model: TAC43A13501
• Shank: SDS Plus
• Thread: M22
• Length: 350mm
• Includes: 1 pc 8×110mm masonry drill bit
• Compatible Core Bits: TAC430501 (50mm), TAC430651 (65mm), TAC430801 (80mm), TAC431001 (100mm)
• Packaging: Plastic tube

Product Details

• SDS Plus shank – fits any standard SDS Plus rotary hammer drill for tool-free connection
• M22 thread – compatible with TOTAL TCT hole core bits (50–100mm diameter)
• 350mm length – provides the reach needed for deep core drilling through walls and slabs
• 8×110mm masonry pilot bit included – centres the core bit for accurate, clean holes
• Eliminates the need for a dedicated core drilling machine for medium-diameter holes

Materials & Care

• Shank: SDS Plus
• Thread: M22
• Store in the included plastic tube to protect threads and shank
• Keep threads clean and free of debris for secure core bit connection
• Inspect shank and thread before each use – do not use if damaged
• Use only with compatible SDS Plus rotary hammer drills

Grind, shape, and surface concrete, stone, and masonry with precision using the TAC2411251 Segmented Turbo Cup Grinding Wheel. This 125mm cup wheel features a segmented turbo design for aggressive material removal with efficient dust evacuation — ideal for surface preparation, levelling, and edge grinding on hard materials.

Specifications

• Model: TAC2411251
• Diameter: 125mm
• Blade Width: 20mm
• Arbor: 22.22mm
• Packaging: Color box

Product Details

• Designed for use with 125mm (5") angle grinders
• Segmented turbo design – aggressive grinding with efficient dust and debris removal between segments
• 22.22mm arbor – standard fit for most 125mm angle grinders
• Suitable for surface preparation, levelling, edge grinding, and material removal on concrete, stone, brick, and masonry
• 20mm blade width for stable, controlled grinding contact

Materials & Care

• Segment: Diamond (segmented turbo)
• Store in a cool, dry place away from moisture and direct sunlight
• Inspect wheel for cracks or damage before each use – do not use damaged wheels
• Always use appropriate PPE (eye protection, gloves, face shield, dust mask) when grinding
• Do not exceed the grinder's maximum rated speed

Make fast, clean cuts through wood with the TAC231005 TCT Saw Blade. This compact 100mm (4") blade features 40 tungsten carbide-tipped teeth and runs at up to 15,300 RPM, making it ideal for use with small circular saws on timber, boards, and sheet wood applications.

Specifications

• Model: TAC231005
• Blade Diameter: 100mm (4")
• Arbor: 16mm
• Teeth: 40T
• Max. Speed: 15,300 RPM
• Tip Material: Tungsten Carbide (TCT)
• Application: Wood cutting, Circular saw

Product Details

• Designed for use with 100mm (4") circular saws
• Tungsten carbide-tipped (TCT) teeth – stay sharp longer for consistent, quality cuts in wood
• 40 teeth – balanced tooth count for fast yet clean cuts in timber and boards
• 16mm arbor – standard fit for most 100mm circular saws
• Max. speed 15,300 RPM – always verify saw speed compatibility before use

Materials & Care

• Tip Material: Tungsten Carbide (TCT)
• Use only for wood cutting – not suitable for metal or masonry
• Store in a dry place to prevent corrosion of the blade body
• Clean resin and sawdust buildup from teeth regularly to maintain cutting performance
• Do not exceed the maximum rated speed of 15,300 RPM
• Inspect teeth before each use – replace if chipped or worn

Cut through concrete, brick, stone, and tile with power and precision using the TAC2111803 Dry Diamond Disc. At 180mm (7"), this large-format diamond disc is built for heavy-duty cutting tasks on 7" angle grinders, delivering fast, clean results on demanding job sites. Packed in a color box for easy identification and storage.

Specifications

• Model: TAC2111803
• Size: 180mm (7") × 22mm
• Blade Width: 7.5mm
• UPC: 6925582161199
• Weight: 0.36 kg
• Packaging: Color box

Product Details

• Designed for use with 180mm (7") angle grinders
• 7.5mm blade width – efficient material removal for fast cutting performance
• 22mm bore – standard fit for most 180mm angle grinders
• Suitable for cutting concrete, brick, stone, and tile
• Dry cut design – no water required for everyday cutting tasks

Materials & Care

• Segment: Diamond
• Store in a cool, dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield, dust mask) when cutting
• Do not exceed the grinder's maximum rated speed

Cut precise channels through concrete, brick, and stone with the TAC2111253 Diamond Cutting Disc. This 125mm universal fast-cut disc supports both wet and dry cutting at up to 12,200 RPM, and is specifically designed for use with the TOTAL TWLC1256 Wall Chaser — making it the ideal blade for electrical conduit routing, pipe chasing, and wall groove work.

Specifications

• Model: TAC2111253
• Size: 125mm × 22mm
• Blade Width: 10mm
• Max. Speed: 12,200 RPM
• Cut Type: Wet and Dry
• Application: Universal, Fast Cut
• Compatible Tool: TOTAL TWLC1256 Wall Chaser

Product Details

• Designed for use with the TOTAL TWLC1256 Wall Chaser
• Universal fast cut design – aggressive, efficient cutting through concrete, brick, and stone
• Wet and dry cutting – versatile use with or without water cooling
• 22mm bore – standard fit for 125mm wall chasers and angle grinders
• Max. speed 12,200 RPM – always verify tool speed compatibility before use

Materials & Care

• Segment: Diamond (universal segmented)
• For wet cutting, always use with water to prevent overheating and extend blade life
• Store in a dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield, dust mask) when cutting
• Do not exceed the maximum rated speed of 12,200 RPM

Stock up for the job site with the TAC2111003M Dry Diamond Disc Set. This 10-piece set of 100mm universal segmented diamond discs delivers fast, aggressive cutting on tile, stone, concrete, and brick — wet or dry. Packed in a durable metal box for easy storage and transport on site.

Specifications

• Model: TAC2111003M
• Set: 10 pcs
• Disc Diameter: 100mm (4")
• Bore: 16mm (5/8")
• Blade Length: 7.5mm
• Cut Type: Wet and Dry
• Application: Universal segmented, Fast Cut
• Packaging: Metal box

Product Details

• Designed for use with 100mm (4") angle grinders
• Universal segmented design – fast, aggressive cutting on tile, stone, concrete, and brick
• Fast cut performance – 7.5mm blade length for efficient material removal
• Wet and dry cutting – versatile use with or without water cooling
• 16mm (5/8") bore – standard fit for most 100mm angle grinders
• 10-piece set in metal box – great value, protected storage for job site use

Materials & Care

• Segment: Diamond (universal segmented)
• For wet cutting, always use with water to prevent overheating and extend blade life
• Store in the included metal box in a dry place
• Inspect each disc for cracks or damage before use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting

Tackle any hard material cutting job with the TAC2131003 Diamond Cutting Disc. This 100mm universal turbo disc supports both wet and dry cutting, delivering clean, fast cuts through tile, stone, concrete, brick, and more. With a max speed of 15,300 RPM, it's ready to perform on any compatible 4" angle grinder.

Specifications

• Model: TAC2131003
• Disc Diameter: 4" (100mm)
• Size: 100mm × 16mm
• Max. Speed: 15,300 RPM
• Cut Type: Wet and Dry
• Application: Universal turbo, Clean Cut

Product Details

• Designed for use with 100mm (4") angle grinders
• Universal turbo segment – aggressive cutting with clean finish on a wide range of hard materials
• Wet and dry cutting – versatile use with or without water cooling
• Clean cut design – minimises chipping and edge breakout on tile, stone, and concrete
• Max. speed 15,300 RPM – always verify grinder speed compatibility before use

Materials & Care

• Segment: Diamond (universal turbo)
• For wet cutting, always use with water to prevent overheating and extend blade life
• Store in a dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the maximum rated speed of 15,300 RPM

Cut through marble, granite, tile, stone, brick, and concrete with exceptional smoothness using the TAC2151051 Ultrathin Diamond Disc. Featuring a special plastic flange for vibration-free operation, a reinforced matrix for superior cutting effect, and an ultra-thin 0.9mm matrix thickness for maximum efficiency — this disc is built for professionals who demand clean results every time.

Specifications

• Model: TAC2151051
• Size: 105mm (4") × 16mm
• Blade Width: 10mm
• Blade Thickness: 1.5mm
• Matrix Thickness: 0.9mm
• Material: 75Cr1
• Application: Marble, granite, bricks, stone, concrete, tile

Product Details

• Special plastic flange – ensures smooth, stable cutting with reduced vibration
• Reinforced matrix – delivers excellent cutting effect and longer segment life
• 0.9mm ultrathin matrix – higher efficiency with minimal material loss
• 75Cr1 steel body – high-quality chromium steel for durability and blade stability
• Compatible with 105mm (4") lithium-ion angle grinders
• Suitable for marble, granite, bricks, stone, concrete, and tile

Materials & Care

• Body Material: 75Cr1 (Chromium Steel)
• Segment: Diamond (reinforced matrix)
• Store in a dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the grinder's maximum rated speed

Slice through marble, granite, bricks, stone, and concrete with ease using the TAC061051 Ultrathin Diamond Disc. At just 0.9mm matrix thickness, this 105mm disc is engineered for clean, precise cuts with minimal material loss — perfect for tiling, stone finishing, and masonry work. Compatible with lithium-ion angle grinders for cordless convenience on the job site.

Specifications

• Model: TAC061051
• Size: 105mm (4") × 16mm
• Blade Width: 10mm
• Blade Thickness: 1.6mm
• Matrix Thickness: 0.9mm
• Material: 75Cr1
• Application: Marble, granite, bricks, stone, concrete
• Packaging: Color box

Product Details

• Designed for use with 105mm (4") angle grinders, including lithium-ion cordless models
• 0.9mm ultrathin matrix – minimises material loss and reduces chipping for cleaner cuts
• 75Cr1 steel body – high-quality chrome steel for durability and blade stability
• 16mm bore – standard fit for most 105mm angle grinders
• Suitable for cutting marble, granite, bricks, stone, and concrete

Materials & Care

• Body Material: 75Cr1 (Chromium Steel)
• Segment: Diamond
• Store in a dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the grinder's maximum rated speed

Cut through tile, marble, and brick with precision using the TAC2131051HT Ultrathin Diamond Disc. At just 1.0mm thick, this 105mm wet cut disc delivers clean, chip-free edges on a wide range of hard materials — making it the go-to blade for tiling, stone work, and masonry finishing.

Note: Not intended for use on vitrified brick (nano glass).

Specifications

• Model: TAC2131051HT
• Size: 105mm (4") × 20mm
• Blade Length: 10mm
• Thickness: 1.0mm
• Max. Speed: 15,300 RPM
• Cut Type: Wet Cut
• Application: Universal purpose – tile, marble, brick

Product Details

• Designed for use with 105mm (4") angle grinders
• 1.0mm ultrathin profile – minimises material loss and reduces chipping for cleaner cuts
• Wet cut design – use with water for cooler cutting and longer blade life
• Diamond segment – universal purpose for tile, marble, and brick
• Max. speed 15,300 RPM – always verify grinder speed compatibility before use
• Not suitable for vitrified brick (nano glass)

Materials & Care

• Segment: Diamond
• Always use with water (wet cut) to prevent overheating and extend blade life
• Store in a dry place away from moisture and direct sunlight
• Inspect disc for cracks or damage before each use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the maximum rated speed of 15,300 RPM

Handle the biggest aluminium cutting jobs with the TAC2339212 TCT Saw Blade. This industrial-grade 305mm (12") blade packs 120 tungsten carbide-tipped teeth for exceptionally smooth, burr-free cuts through aluminium profiles, extrusions, and sheets. Designed for the TOTAL TMS43183051 Mitre Saw & Table Saw combo, with reduction rings for versatile arbor compatibility.

Specifications

• Model: TAC2339212
• Blade Diameter: 305mm (12")
• Arbor: 30mm
• Reduction Rings: 25.4mm & 16mm
• Teeth: 120T
• Max. Speed: 5,000 RPM
• Tip Material: Tungsten Carbide (TCT)
• Application: Aluminium cutting, Mitre Saw & Table Saw
• Compatible Saw: TOTAL TMS43183051 Mitre Saw & Table Saw

Product Details

• Tungsten carbide-tipped (TCT) teeth – engineered for long-lasting sharpness on non-ferrous metals
• 120 teeth – very high tooth count for ultra-smooth, clean finishes on aluminium
• 305mm (12") diameter – handles large cross-sections and wide aluminium profiles
• Reduction rings included (25.4mm & 16mm) – compatible with multiple arbor sizes
• Fits TOTAL TMS43183051 Mitre Saw & Table Saw

Materials & Care

• Tip Material: Tungsten Carbide (TCT)
• Use only for aluminium and non-ferrous metal cutting – not suitable for steel or wood
• Store in a dry place to prevent corrosion of the blade body
• Clean aluminium buildup from teeth regularly to maintain cutting performance
• Do not exceed the maximum rated speed of 5,000 RPM
• Inspect teeth before each use – replace if chipped or worn

Achieve ultra-smooth, burr-free cuts through aluminium with the TAC2337210 TCT Saw Blade. Packed with 100 tungsten carbide-tipped teeth on a 254mm (10") blade, this high tooth-count blade is purpose-built for precision aluminium cutting — ideal for profiles, extrusions, and sheets. Designed to fit the TOTAL TS42182551 Slide Mitre Saw and TS42182552 Mitre Saw.

Specifications

• Model: TAC2337210
• Disc Diameter: 254mm (10")
• Arbor: 30mm
• Reduction Rings: 25.4mm & 16mm
• Teeth: 100T
• Tip Material: Tungsten Carbide (TCT)
• Application: Aluminium cutting
• Compatible Saws: TOTAL TS42182551 Slide Mitre Saw, TOTAL TS42182552 Mitre Saw

Product Details

• Tungsten carbide-tipped (TCT) teeth – engineered for long-lasting sharpness on non-ferrous metals
• 100 teeth – very high tooth count for exceptionally smooth, clean finishes on aluminium
• Reduction rings included (25.4mm & 16mm) – compatible with multiple arbor sizes
• Fits TOTAL TS42182551 Slide Mitre Saw and TS42182552 Mitre Saw

Materials & Care

• Tip Material: Tungsten Carbide (TCT)
• Use only for aluminium and non-ferrous metal cutting – not suitable for steel or wood
• Store in a dry place to prevent corrosion of the blade body
• Clean aluminium buildup from teeth regularly to maintain cutting performance
• Inspect teeth before each use – replace if chipped or worn

Cut through wood with speed and precision using the TAC231623 TCT Saw Blade. Fitted with 60 tungsten carbide-tipped teeth on a 235mm (9-1/4") blade, this industrial-grade blade delivers smooth, clean cuts in timber, boards, and sheet wood. Includes reduction rings for versatile arbor compatibility with most circular saws.

Specifications

• Model: TAC231623
• Blade Diameter: 235mm (9-1/4")
• Arbor: 30mm
• Reduction Rings: 25.4mm & 16mm
• Teeth: 60T
• Max. Speed: 6,500 RPM
• Tip Material: Tungsten Carbide (TCT)
• Application: Wood cutting, Circular saw

Product Details

• Tungsten carbide-tipped (TCT) teeth – stay sharp longer for consistent, high-quality cuts in wood
• 60 teeth – high tooth count for smooth, fine finishes on timber, plywood, and boards
• Reduction rings included (25.4mm & 16mm) – compatible with multiple arbor sizes
• Designed for use with circular saws up to 6,500 RPM
• Industrial grade – suitable for professional and heavy-duty woodworking applications

Materials & Care

• Tip Material: Tungsten Carbide (TCT)
• Use only for wood cutting – not suitable for metal or masonry
• Store in a dry place to prevent corrosion of the blade body
• Clean resin and sawdust buildup from teeth regularly to maintain cutting performance
• Do not exceed the maximum rated speed of 6,500 RPM
• Inspect teeth before each use – replace if chipped or worn

Achieve smooth, precise cuts through aluminium with the TAC233523 TCT Saw Blade. Fitted with 60 tungsten carbide-tipped teeth, this 210mm blade is engineered specifically for aluminium cutting — delivering clean, burr-free edges with minimal material waste. Designed to fit the TOTAL TS42142101 Mitre Saw with included reduction rings for versatile arbor compatibility.

Specifications

• Model: TAC233523
• Disc Diameter: 210mm (8-1/4")
• Arbor: 30mm
• Reduction Rings: 25.4mm & 16mm
• Teeth: 60T
• Tip Material: Tungsten Carbide (TCT)
• Application: Aluminium cutting
• Compatible Saw: TOTAL TS42142101 Mitre Saw

Product Details

• Tungsten carbide-tipped (TCT) teeth – stay sharp longer and handle the demands of non-ferrous metal cutting
• 60 teeth – high tooth count for smooth, fine finishes on aluminium profiles, extrusions, and sheets
• Reduction rings included (25.4mm & 16mm) – compatible with multiple arbor sizes
• Specifically designed for the TOTAL TS42142101 Mitre Saw

Materials & Care

• Tip Material: Tungsten Carbide (TCT)
• Use only for aluminium and non-ferrous metal cutting – not suitable for steel or masonry
• Store in a dry place to prevent corrosion of the blade body
• Clean resin and aluminium buildup from teeth regularly to maintain cutting performance
• Inspect teeth before each use – replace if chipped or worn

Keep your crew cutting all day with the TAC22110550 Abrasive Metal Cutting Disc Set. This bulk 50-piece set of 105mm ultra-thin cutting discs is the smart choice for high-volume metalwork — pipes, rebar, sheet metal, angle iron, and more. At just 1.2mm thick, each disc delivers fast, clean cuts with minimal material loss and heat buildup.

Specifications

• Model: TAC22110550
• Set: 50 pcs
• Disc Diameter: 105mm
• Bore: 16mm
• Thickness: 1.2mm
• Application: Metal

Product Details

• Designed for use with 105mm (4") angle grinders
• 1.2mm ultra-thin profile – minimises material loss and reduces heat for cleaner cuts
• 16mm bore – standard fit for most 105mm angle grinders
• Suitable for cutting pipes, rebar, sheet metal, angle iron, and other metal materials
• 50-piece bulk set – ideal for job sites, workshops, and high-volume cutting tasks

Materials & Care

• Application Material: Metal
• Store in a cool, dry place away from moisture and direct sunlight
• Inspect each disc for cracks or damage before use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the grinder's maximum rated speed

Stock up and keep cutting with the TAC2211005 Abrasive Metal Cutting Disc Set. This 10-piece set of 105mm ultra-thin cutting discs is built for fast, clean cuts through metal — pipes, rebar, sheet metal, angle iron, and more. At just 1.2mm thick, each disc minimises material loss and heat buildup for precise, efficient cuts every time.

Specifications

• Model: TAC2211005
• Set: 10 pcs
• Disc Diameter: 105mm
• Bore: 16mm
• Thickness: 1.2mm
• Application: Metal

Product Details

• Designed for use with 105mm (4") angle grinders
• 1.2mm ultra-thin profile – minimises material loss and reduces heat for cleaner cuts
• 16mm bore – standard fit for most 105mm angle grinders
• Suitable for cutting pipes, rebar, sheet metal, angle iron, and other metal materials
• 10-piece set – great value, always have a disc ready on the job

Materials & Care

• Application Material: Metal
• Store in a cool, dry place away from moisture and direct sunlight
• Inspect each disc for cracks or damage before use – do not use damaged discs
• Always use appropriate PPE (eye protection, gloves, face shield) when cutting
• Do not exceed the grinder's maximum rated speed