Automatic Pump Control 10bar TOTAL TWPS101

The TOTAL TWPS101 is an automatic pump control switch with 1.5 bar starting pressure and 10 bar (145 psi) max pressure. Rated at 1100W / 10A with IP65 protection and 60°C max water temperature tolerance. Fits standard 1 inch pipe diameter.

Specifications

Product Features

• Automatic start/stop control — activates pump at 1.5 bar and cuts off at max pressure
• 10 bar (145 psi) max pressure for a wide range of water pump applications
• IP65 protection rating for safe use in outdoor and wet environments
• Max 60°C water temperature tolerance
• 1" pipe diameter for standard pump connection
• 1100W / 10A rated for compatibility with most domestic and light industrial pumps

Automatic Pump Control 10bar TOTAL TWPS102

The TOTAL TWPS102 is an automatic pump control switch with 1.5 bar starting pressure and 10 bar max pressure. Rated at 1100W / 10A with IP65 protection for outdoor and wet environment use. Fits standard 1 inch pipe diameter.

Specifications

Product Features

• Automatic start/stop control — activates pump at 1.5 bar and cuts off at max pressure
• 10 bar max pressure for a wide range of water pump applications
• IP65 protection rating for safe use in outdoor and wet environments
• 1" pipe diameter for standard pump connection
• 1100W / 10A rated for compatibility with most domestic and light industrial pumps

Automatic Pump Controller 10Bar 10A

Automatic pump controller with 10Bar max pressure, 10A max current, and 1.5Bar starting pressure. Features Power On, Pump On, and Failure LED indicators, red Restart button, dry-run protection, and 2× yellow pressure adjustment screws. Compatible with standard water pumps for automatic start/stop control based on water pressure. Model: Jadever JDPC1A01.

Specifications

Features

• Automatic pump start/stop control based on water pressure for hands-free operation
• 1.5 Bar starting pressure for automatic pump activation when water demand is detected
• 10 Bar max pressure rating for compatibility with standard domestic water pumps
• Dry-run protection to automatically stop the pump when water supply runs out
• Power On, Pump On, and Failure LED indicators for clear machine status monitoring
• Red Restart button for easy manual reset after fault or dry-run shutdown
• 2× yellow pressure adjustment screws for fine-tuning start and stop pressure settings
• Male threaded inlet/outlet ports for standard pipe connections
• Compatible with Jadever and standard single-phase water pumps up to 10A

Automatic Self-Priming Peripheral Pump 370W TOTAL TWP93706

The TOTAL TWP93706 is a 370W (0.5HP) automatic self-priming peripheral pump with a 100% copper wire motor, brass impeller, and integrated pressure tank. Delivers 35m max head and 35L/min max flow with 8m max suction. IPX4 rated with built-in thermal protector.

Specifications

Product Features

• Automatic self-priming with integrated pressure tank for consistent water pressure
• 100% copper wire motor for efficient, long-lasting operation
• Brass impeller for durability and smooth water flow
• Electrophoresis pump body for superior rust and corrosion protection
• Built-in thermal protector to prevent motor burnout from overheating
• IPX4 splash-proof protection for safe outdoor installation
• 35m max head for pumping water to elevated tanks or upper floors

Automatic Self-Priming Peripheral Pump 750W TOTAL TWP97505

The TOTAL TWP97505 is a 750W (1.0HP) automatic self-priming peripheral pump with a 100% copper wire motor and integrated pressure tank for consistent water pressure. Ideal for household and light commercial water supply applications.

Specifications

Product Features

• Automatic self-priming with integrated pressure tank for consistent water pressure
• 100% copper wire motor for efficient, long-lasting operation
• 750W (1.0HP) powerful motor for household and light commercial water supply
• 220–240V rated for standard household power supply

Automatic Wire Stripper 0.2-6mm²

Professional 3-in-1 automatic wire stripper combining stripping, cutting, and crimping in one compact tool. Self-adjusting mechanism handles 0.2–6mm² (10–24 AWG) wires cleanly without damaging the conductor — ideal for electricians, automotive technicians, and workshop professionals.

Specifications

• Model: THT15246
• Functions: Stripping, cutting, crimping
• Stripping Range: 0.2–6 mm² (10–24 AWG)
• Cutting: Copper and aluminum wires
• Crimping — Insulated terminals: 0.5–6 mm² (10–22 AWG)
• Crimping — Non-insulated terminals: 0.5–6 mm² (4–22 AWG)
• Crimping — Ignition terminals: 7–8 mm²
• Handle: Durable and comfortable
• Packaging: Sliding card

Key Features

• Automatic Wire Stripping: Self-adjusting mechanism strips wires cleanly and quickly without damaging the conductor.
• Cutting Function: Cleanly cuts both copper and aluminum wires.
• 3-Type Crimping: Handles insulated, non-insulated, and ignition terminals across a wide range of wire sizes.
• Ergonomic Handle: Comfortable grip for fatigue-free use during extended wiring tasks.
• Ideal For: Electrical installation, automotive wiring, panel building, home wiring, and general electrician work.

✔ Strip, cut, crimp — one tool does it all.

Automotive Circuit Tester DC 100V

Professional automotive circuit tester for fast, accurate DC electrical diagnostics. Digital display, built-in flashlight, and extended probe lead up to 2700mm for hard-to-reach circuits. Handles DC 1V–100V across cars, trucks, and heavy equipment.

Specifications

What's in the Box

• 1× TOTAL Automotive Circuit Tester DC 100V (THTS41001)

Materials & Care

• Keep probe tip clean for accurate readings
• Coil and store the lead properly to avoid kinking
• Rated for DC circuits only — do not use on AC voltage
• Store in a dry environment away from heat and moisture

Automotive Circuit Tester DC 6-24V JADEVER JDTP414501

Compact automotive circuit tester by JADEVER for testing DC voltage from 6V to 24V in vehicle electrical systems. Features an insulated AS handle, 3mm probe tip, and 0.7m lead with crocodile clip for safe and convenient circuit testing.

Specifications

Product Features

• Tests DC voltage from 6V to 24V for automotive and vehicle electrical diagnostics
• Built-in LED indicator lights up when circuit is live for instant visual confirmation
• 3mm probe tip for precise contact on terminals, fuses, and connectors
• 0.7m lead with crocodile clip for secure grounding to vehicle chassis
• AS insulated handle for safe, comfortable use
• Includes electric pen clip for convenient pocket storage
• Suitable for cars, motorcycles, trucks, and marine electrical systems

Make clean, precise left-hand cuts through sheet metal with the THT521106 Aviation Snip. Featuring a unique two-tone soft grip handle for comfort and control, this left-cut aviation snip is built for HVAC, roofing, and sheet metal fabrication work where curved and straight cuts are required.

Specifications

• Model: THT521106
• Type: Left cut aviation snip
• Handle: Two-tone soft grip (unique design)

Product Details

• Left-cut design – ideal for cutting curves to the left and straight cuts in sheet metal
• Two-tone soft grip handle – comfortable, non-slip grip for controlled cutting with reduced hand fatigue
• Suitable for HVAC, roofing, automotive bodywork, and sheet metal fabrication
• Colour-coded red handle – standard industry colour for left-cut snips for quick identification

Materials & Care

• Clean blades after each use to remove metal shavings and debris
• Apply a light coat of oil to the blades and pivot to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials beyond the tool’s rated capacity
• Always use appropriate PPE (gloves, eye protection) when cutting sheet metal

Bagless Vacuum Cleaner 1100W Kärcher VC 3 Plus

The Kärcher VC 3 Plus is a bagless multi-cyclone vacuum cleaner that combines consistent suction power with low running costs and whisper-quiet operation. With a washable waste container, HEPA 12 filtration capturing 99.5% of dust and particles, and an elegant compact design, it is the ideal choice for modern family homes — especially for allergy sufferers.

Bagless Vacuum Cleaner 1100W Kärcher VC 3 Plus

Product Features

• Multi-cyclone technology — No loss of suction power throughout the entire cleaning session, regardless of how full the container is.
• Bagless & washable container — 0.9L transparent waste container rinses clean with water — no replacement filter bags needed, saving ongoing costs.
• HEPA 12 filter — Captures 99.5% of dust and fine particles for exceptionally clean air output — ideal for allergy sufferers.
• Transparent waste container — See the dirt level and cleaning progress at a glance.
• Low noise operation — Quiet enough for daily family use without disruption.
• 7.5m operating radius — Wide reach for cleaning large rooms without repositioning.
• Automatic cable rewind — Tidy cable management at the press of a button.
• Soft grip handle & parking position — Comfortable to use and easy to park during breaks.
• Versatile cleaning — Hard floors, carpets, corners, crevices, gaps, and hard-to-reach areas.

Ball Point Hex Key Set 1.5-10mm 9Pcs JADEVER JDHK2292

Professional 9-piece extra-long arm ball point hex key set by JADEVER made from Cr-V steel with heat treatment and chrome plating. The ball point end allows angled access up to 25° for working in confined or awkward spaces without removing the key.

Specifications

Product Features

• Ball point end allows angled insertion up to 25° for access in tight and confined spaces
• Extra-long arm for greater reach into deep recesses and hard-to-access areas
• Flat hex end on the short arm for maximum torque when needed
• 9-piece set covers the most common metric hex sizes from 1.5mm to 10mm
• Cr-V steel with heat treatment for superior hardness and durability
• Chrome plated finish for corrosion resistance and professional appearance
• Colour-coded holder for quick size identification and organised storage

Reach fasteners at awkward angles with the THT106292 9-Piece Ball Point Hex Key Set. Made from Chrome-Vanadium (Cr-V) steel with heat treatment and chrome plating, the extra-long arm provides extended reach and leverage while the ball point end allows up to 30° off-axis engagement — ideal for tight spaces where a straight approach isn't possible. Covers 1.5mm to 10mm in a double blister pack.

Specifications

• Model: THT106292
• Material: Chrome-Vanadium (Cr-V) steel
• Set Contents: 9 pcs
• Sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• Design: Ball point end, extra-long arm
• Finish: Heat treated, chrome plated
• Packaging: Double blister

Product Details

• Ball point end – allows up to 30° off-axis engagement for fasteners in hard-to-reach locations
• Extra-long arm – extended reach and greater leverage for faster tightening and loosening
• Cr-V steel with heat treatment – superior hardness and toughness for long service life
• Chrome plated finish – corrosion-resistant and easy to clean
• 9 sizes 1.5–10mm – covers the full range of common metric hex fasteners
• Suitable for furniture assembly, automotive repair, electronics, and machinery maintenance

Materials & Care

• Clean after each use to remove grease and debris
• Apply a light coat of oil to prevent rust during storage
• Store in a dry toolbox or pouch to keep the set organized
• Always use the correct size key for the fastener to avoid stripping
• Do not use the ball point end for high-torque applications – use the straight end for maximum torque

Battery Charger 12A TOTAL TBC1601

The TOTAL TBC1601 is a heavy-duty 12/24V battery charger with 12A boost current, supporting battery capacities from 28Ah to 180Ah. IP20 rated with Class H insulation for safe and reliable charging of vehicle and industrial batteries.

Specifications

Product Features

• Dual voltage output: 12V and 24V for versatile battery compatibility
• Boost mode up to 12A for fast charging of large capacity batteries
• Supports battery capacities from 28Ah up to 180Ah
• IP20 protection rating for safe indoor use
• Class H insulation for high-temperature reliability

Bench Grinder 150W TOTAL TBG15015

The TOTAL TBG15015 is a compact 150W bench grinder with a 150mm (6") grinding disc at 2,950rpm. Features dual grinding wheels for simultaneous coarse and fine grinding. Ideal for sharpening, deburring, and light grinding tasks. Includes 2 eye shields and 2 tool rests.

Specifications

Product Features

• 150mm (6") grinding disc for versatile bench grinding tasks
• 2,950rpm speed for efficient sharpening and deburring
• Dual grinding wheels for simultaneous coarse and fine grinding
• Eye shields for operator safety during grinding
• Adjustable tool rests for precise workpiece positioning

Bench Grinder 350W TOTAL TBG35020

The TOTAL TBG35020 is a heavy-duty 350W bench grinder with a 200mm (8") grinding disc at 2,950rpm and a robust aluminium base for stable, vibration-free operation. Ideal for sharpening, deburring, and medium-duty grinding tasks. Includes 2 eye shields and 2 tool rests.

Specifications

Product Features

• Heavy duty aluminium base for vibration-free, stable grinding
• Large 200mm (8") grinding disc for wider grinding coverage
• 350W powerful motor for medium to heavy-duty grinding tasks
• 2,950rpm speed for efficient sharpening and deburring
• Eye shields for operator safety during grinding
• Adjustable tool rests for precise workpiece positioning

Bent Nose Pliers 160mm Cr-V JADEVER JDPL4716

High-leverage 6" bent nose pliers by JADEVER made from premium Cr-V steel, engineered to save 30% more energy than standard pliers. The angled jaw and high-leverage design reduce hand fatigue during extended use in electrical, mechanical, and precision work.

Specifications

Product Features

• High-leverage design requires 30% less gripping force than standard pliers
• Angled bent nose jaw for easy access to confined spaces and awkward angles
• Premium Cr-V (Chrome Vanadium) steel for superior hardness and durability
• Black finish with polished jaw for corrosion resistance and professional appearance
• Serrated jaw for firm, non-slip gripping of wire and small components
• Ergonomic two-color handle for comfortable, fatigue-free extended use

Bent Nose Pliers 160mm JADEVER JDPL4C06

Precision 6" bent nose pliers by JADEVER crafted from carbon steel with a polished, anti-rust oil finish. The angled jaw design provides excellent access to confined spaces and awkward angles in electrical, mechanical, and jewellery work.

Specifications

Product Features

• Angled bent nose jaw for easy access to confined spaces and awkward angles
• Carbon steel construction for superior strength and long-lasting durability
• Polished finish with anti-rust oil treatment for corrosion resistance
• Serrated jaw for firm gripping of small components and wire
• Two-color bi-material handle for a comfortable, non-slip grip
• 6" (160mm) size ideal for electrical, mechanical, and precision tasks

Bolt Cutter 12"

Heavy-duty 12" (300mm) bolt cutter with 5mm cutting capacity. Delivers clean, powerful cuts through wire, chains, padlocks, bolts, and fencing materials — a reliable everyday cutting tool for security, construction, and workshop use.

Specifications

What's in the Box

• 1× TOTAL Bolt Cutter 12" (THT113126)

Materials & Care

• Wipe blades clean with a dry cloth after each use
• Apply a light coat of machine oil to blades and pivot periodically
• Do not exceed the rated 5mm cutting capacity
• Store in a dry environment to preserve sharpness

Bolt Cutter 14"

Heavy-duty 14" bolt cutter in Cr-V steel with 7mm cutting capacity and rubber handle. Delivers clean, powerful cuts through wire, chains, padlocks, bolts, and fencing materials.

Specifications

What's in the Box

• 1× TOTAL Bolt Cutter 14" (THT113146)

Materials & Care

• Cr-V steel blades for exceptional hardness, edge retention, and long service life
• Wipe blades clean with a dry cloth after each use
• Apply a light coat of machine oil to blades and pivot periodically
• Do not exceed the rated 7mm cutting capacity

Bolt Cutter 18"

Heavy-duty 18" bolt cutter in Cr-V steel with 8mm cutting capacity and rubber handle. Delivers clean, powerful cuts through wire, chains, padlocks, bolts, and fencing materials.

Specifications

What's in the Box

• 1× TOTAL Bolt Cutter 18" (THT113186)

Materials & Care

• Cr-V steel blades for exceptional hardness, edge retention, and long service life
• Wipe blades clean with a dry cloth after each use
• Apply a light coat of machine oil to blades and pivot periodically
• Do not exceed the rated 8mm cutting capacity

Bolt Cutter 18" JADEVER JDBC2018

Heavy-duty 18" bolt cutter by JADEVER with a drop-forged Cr-V blade capable of cutting up to 8mm bolts, chains, wire rope, and padlocks. Features a new ergonomic handle design for comfortable, powerful cutting with minimal effort.

Specifications

Product Features

• Drop-forged Cr-V blade for superior hardness, strength, and long service life
• Cuts bolts, chains, wire rope, and padlocks up to 8mm diameter
• New ergonomic handle design for comfortable, fatigue-free cutting
• Compound leverage mechanism for maximum cutting force with minimal effort
• 18" length provides excellent leverage for heavy-duty cutting tasks
• Two-color non-slip handle grip for secure control

Bolt Cutter 24"

Heavy-duty 24" bolt cutter in Cr-V steel with 10mm cutting capacity and rubber handle. Delivers clean, powerful cuts through heavy wire, chains, padlocks, bolts, and fencing materials.

Specifications

What's in the Box

• 1× TOTAL Bolt Cutter 24" (THT113246)

Materials & Care

• Cr-V steel blades for exceptional hardness, edge retention, and long service life
• Wipe blades clean with a dry cloth after each use
• Apply a light coat of machine oil to blades and pivot periodically
• Do not exceed the rated 10mm cutting capacity

Bolt Cutter 24" JADEVER JDBC2024

Heavy-duty 24" bolt cutter by JADEVER with a drop-forged Cr-V blade capable of cutting up to 10mm bolts, chains, wire rope, and padlocks. Features a new ergonomic handle design for comfortable, powerful cutting with maximum leverage.

Specifications

Product Features

• Drop-forged Cr-V blade for superior hardness, strength, and long service life
• Cuts bolts, chains, wire rope, and padlocks up to 10mm diameter
• New ergonomic handle design for comfortable, fatigue-free cutting
• Compound leverage mechanism for maximum cutting force with minimal effort
• 24" (600mm) length provides excellent leverage for heavy-duty cutting tasks
• Two-color non-slip handle grip for secure control

Bolt Cutter 30"

Heavy-duty 30" bolt cutter in Cr-V steel with 13mm cutting capacity and rubber handle. Delivers clean, powerful cuts through thick wire, chains, padlocks, bolts, and fencing materials.

Specifications

What's in the Box

• 1× TOTAL Bolt Cutter 30" (THT113306)

Materials & Care

• Cr-V steel blades for exceptional hardness, edge retention, and long service life
• Wipe blades clean with a dry cloth after each use
• Apply a light coat of machine oil to blades and pivot periodically
• Do not exceed the rated 13mm cutting capacity

Bolt Cutter 36"

Heavy-duty 36" bolt cutter in Cr-V steel with 16mm cutting capacity and rubber handle. Delivers effortless, clean cuts through thick wire, chains, padlocks, rebar, and fencing materials.

Specifications

What's in the Box

• 1× TOTAL Bolt Cutter 36" (THT113366)

Materials & Care

• Cr-V steel blades for exceptional hardness, edge retention, and long service life
• Wipe blades clean with a dry cloth after each use
• Apply a light coat of machine oil to blades and pivot periodically
• Do not exceed the rated 16mm cutting capacity

Bolt Cutter 36" JADEVER JDBC2036

Professional-grade 36" bolt cutter by JADEVER with a drop-forged Cr-V blade capable of cutting up to 16mm bolts, chains, wire rope, and padlocks. Built for heavy-duty security and construction applications requiring maximum cutting power.

Specifications

Product Features

• Drop-forged Cr-V blade for superior hardness, strength, and long service life
• Cuts bolts, chains, wire rope, and padlocks up to 16mm diameter
• New ergonomic handle design for comfortable, fatigue-free cutting
• Compound leverage mechanism for maximum cutting force with minimal effort
• 36" (900mm) length delivers exceptional leverage for the toughest cutting tasks
• Two-color non-slip handle grip for secure control

Bolt Cutter 42"

Heavy-duty 42" bolt cutter in Cr-V steel with 19mm cutting capacity and rubber handle. Built for extreme security, construction, and industrial cutting applications.

Specifications

What's in the Box

• 1× TOTAL Bolt Cutter 42" (THT113426)

Materials & Care

• Cr-V steel blades for exceptional hardness, edge retention, and long service life
• Wipe blades clean with a dry cloth after each use
• Apply a light coat of machine oil to blades and pivot periodically
• Do not exceed the rated 19mm cutting capacity

Bolt Cutter 48"

Heavy-duty 48" bolt cutter in Cr-V steel with 22mm cutting capacity and rubber handle. The largest in the TOTAL range — engineered for extreme security, construction, and industrial cutting applications.

Specifications

What's in the Box

• 1× TOTAL Bolt Cutter 48" (THT113486)

Materials & Care

• Cr-V steel blades for exceptional hardness, edge retention, and long service life
• Wipe blades clean with a dry cloth after each use
• Apply a light coat of machine oil to blades and pivot periodically
• Do not exceed the rated 22mm cutting capacity