All Construction Products – Tools & Building Materials | ESE Mall – Page 2

	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

Three packages of tile grout on a tiled wall with application images below.

Sika

Sika® Tile Grout

(0)

$2.20

Sika® Tile Grout

A one-component, pre-packed cementitious tile grout combining cement with selected pigments and admixtures. Non-shrink, thixotropic, and available in multiple colours for consistent, crack-free grout joints on floors and walls in dry and wet areas.

Overview

Specifications

Property	Value
Type	1-component cementitious tile grout
Density (mixed)	~1.9 kg/L
Mixing Ratio	0.3 L water : 1 kg grout (by weight) / 1:2.5 (by volume)
Pot Life	~1 hour
Foot Traffic Time	After 24 hours
Ambient Temperature	+15°C to +40°C
Shelf Life	9 months from date of production
Storage	Dry, +5°C to +30°C, original sealed packaging

Usage

Filling spaces between homogeneous tiles, ceramic tiles, marble, granite, mosaic, and natural stone
Floor and wall applications
Interior and exterior use
Dry and wet areas (use SikaCim Latex instead of water for wet areas)

Advantages

Non-shrink and prevents cracks
Non-sag / thixotropic – suitable for wall applications
Consistent colour quality
Easy to use – just add water (or SikaCim Latex for wet areas)

Packaging

1 kg / bag
25 kg / box

Colour

Available in: White, Grey, Beige, Charcoal Black (see colour chart)

Product Details

Product Information

Property	Detail
Composition	Cement with selected pigments and admixtures (1-component)
Shelf Life	9 months from date of production (original sealed packaging)
Storage Conditions	Dry, +5°C to +30°C
Density (mixed)	~1.9 kg/L

Technical Information – Consumption Guide

Tile Size (mm)	Joint Width (mm)	Consumption (kg/m²)
200×200×6	1	0.48
200×200×6	3	1.44
300×300×6	1	0.36
300×300×6	3	1.08
400×400×6	1	0.24
400×400×6	3	0.72
600×600×10	1	0.20
600×600×10	3	0.60

Application

Application Information

Parameter	Value
Mixing Ratio	0.3 L water : 1 kg grout (dry area) / 0.3 L SikaCim Latex : 1 kg grout (wet area)
Ambient Temperature	+15°C to +40°C
Pot Life	~1 hour
Foot Traffic	Minimum 24 hours after application

Application Steps

Mixing (Dry Area): Pour 0.3 L of clean water into a mixing vessel. Slowly add Sika® Tile Grout and mix for ~3 minutes using a slow-speed mixer (300–600 rpm) until smooth and lump-free.
Mixing (Wet Area): Replace water with 0.3 L of SikaCim Latex. Mix as above for ~3 minutes.
Application: Apply grout diagonally across tile joints using a rubber trowel, pressing firmly to fill all gaps completely.
Finishing: Allow grout to set for ~10 minutes, then wipe excess grout from tile surfaces with a damp sponge. Run the sponge over joints to achieve consistent, even-depth grout lines.
Curing: Allow minimum 24 hours before foot traffic.

Sika

Sika® Plastocrete®

(0)

From $11.00

Sika® Plastocrete®

A liquid plasticizer admixture for concrete and mortar that acts as both a highly efficient plasticizer and waterproofing agent. Improves workability, increases strength and durability, and reduces shrinkage without increasing water content. Chloride-free and compatible with all Portland Cement types.

Overview

Specifications

Property	Value
Type	Liquid plasticizer and waterproofing admixture
Composition	Modified Lignosulphonate
Colour	Brown liquid
Density	1.055–1.075 kg/L at +25°C
pH Value	4.0–6.0
Shelf Life	12 months from date of production (original sealed packaging)
Storage	Dry conditions, protected from direct sunlight

Usage

Waterproofing of masonry and concrete structures
Reservoirs and dams
Sewerage works, canals, culverts, and tunnels
Water tanks and swimming pools
Wherever waterproof concrete is required

Advantages

Improved workability without increased water content
Allows easier compaction for denser concrete and superior finish
Increased strength and durability
Reduced shrinkage
Improved watertightness
Increased cohesiveness of mortar
Chloride-free – does not attack reinforcement

Packaging

5 L / gallon
25 L / pail

Colour

Brown liquid

Product Details

Product Information

Property	Detail
Composition	Modified Lignosulphonate
Density	1.055–1.075 kg/L at +25°C
pH Value	4.0–6.0
Shelf Life	12 months from date of production
Storage Conditions	Dry conditions, protected from direct sunlight
Compatibility	All types of Portland Cement including S.R.C. type and Hydraulic Cement

Application

Application Information

Parameter	Value
Recommended Dosage	0.5 kg (0.43 L) per 2 bags of cement (50 kg/bag)
Dispensing	Dispense directly into mixing water prior to adding aggregates
Cement Compatibility	All Portland Cement types including S.R.C. and Hydraulic Cement

Consumption

0.5 kg (0.43 L) per 2 bags of cement (100 kg total cement)
Accurate dispensing equipment available on request

Application Steps

Dispensing: Measure the required dosage of Sika® Plastocrete® (0.5 kg per 2 cement bags). Dispense the liquid directly into the mixing water before adding aggregates and cement.
Mixing: Mix concrete or mortar as normal. The admixture will improve workability and allow easier compaction without additional water.
Important: Accidental overdosing extends the initial setting time but will not entrain excessive air. If overdosing occurs, do not disturb the concrete – ensure it is properly cured and consult Sika Technical Department.
Curing: Cure concrete as per standard practice to achieve maximum strength and watertightness.

JADEVER

Angle Grinder Stand 100-125mm

(0)

$18.45 $21.70

-15%

Angle Grinder Stand 100-125mm

The JADEVER JDASC1251 is a heavy-duty angle grinder stand with an aluminum alloy body and cast iron base, designed to convert any 100-125mm angle grinder into a stationary cut-off machine. The clamping angle is adjustable from 0° to 45° for versatile bevel and straight cutting of metal, pipe, and bar stock.

Specifications

Brand	JADEVER
Model	JDASC1251
Compatible Grinder Size	100-125 mm Angle Grinders
Body Material	Aluminum Alloy
Base Material	Cast Iron
Clamping Angle	0° to 45° Adjustable
Base Type	Cast Iron with T-slot Workpiece Clamp

Product Features

Fits all standard 100-125mm angle grinders for conversion to a stationary cut-off machine
Clamping angle adjustable from 0° to 45° for straight and bevel cuts
Aluminum alloy body for lightweight rigidity and vibration damping
Heavy cast iron base for maximum stability during cutting operations
T-slot workpiece clamp for secure, repeatable material positioning
Spring-return arm for safe, controlled cutting action
Ideal for cutting metal bar, pipe, angle iron, and flat stock in workshop environments

JADEVER

Drill Stand 60mm

(0)

$16.07 $18.90

-15%

Drill Stand 60mm

The JADEVER JDADS1509 is a heavy-duty drill stand with an aluminum alloy base and body, 43mm holder capacity, and 60mm single working stroke, designed to convert any standard electric drill into a precise bench drill press. The sturdy cast base and adjustable column ensure accurate, repeatable vertical drilling for woodworking, metalworking, and general workshop use.

Specifications

Brand	JADEVER
Model	JDADS1509
Base & Body Material	Aluminum Alloy
Holder Capacity	43 mm (fits most standard electric drills)
Working Stroke	60 mm
Base Type	Flat Cast Base with Clamping Slots
Included	Allen Key
Packaging	Color Box

Product Features

43mm universal holder capacity fits most standard electric drills and rotary tools
60mm working stroke for drilling through standard workpiece thicknesses
Aluminum alloy base and body for lightweight rigidity and vibration damping
Flat cast base with clamping slots for secure workbench mounting
Adjustable column height for accommodating different drill and workpiece sizes
Converts any standard electric drill into a precise bench drill press
Ideal for woodworking, metalworking, and general workshop drilling applications

JADEVER

Lithium-Ion Battery Pack 12V 1.5Ah

(0)

$10.35 $12.18

-15%

Lithium-Ion Battery Pack 12V 1.5Ah

The JADEVER JDLBS5150 is a 12V 1.5Ah lithium-ion battery from the S12 platform, featuring a built-in USB Type-C charging port for convenient charging without a dedicated charger. Compatible with all JADEVER S12 cordless tools, it delivers reliable power in a compact, lightweight form factor.

Specifications

Brand	JADEVER
Model	JDLBS5150
Platform	S12 (12V)
Voltage	12V
Capacity	1.5 Ah
Battery Type	Lithium-Ion
Charging Port	USB Type-C
Compatibility	All JADEVER S12 Cordless Tools
Packaging	Color Box

Product Features

Built-in USB Type-C charging port — charge anywhere without a dedicated charger
S12 platform — one battery fits all JADEVER S12 cordless tools
12V 1.5Ah lithium-ion cells for reliable, consistent power output
No memory effect and low self-discharge for long shelf life between uses
Compact and lightweight design for use with small-format S12 tools
Ideal for light-duty drilling, screwdriving, and general DIY applications

JADEVER

P20S Battery Charger 20V 1.8A

(0)

$7.14 $8.40

-15%

P20S Battery Charger 20V 1.8A

The JADEVER JDFCP518 is a fast intelligent charger for the P20S SHARE 20V lithium-ion battery platform, delivering 1.8A output current for efficient charging of all JADEVER P20S battery packs. With LED charge status indicators and built-in protection circuits, it ensures safe, reliable charging every time.

Specifications

Brand	JADEVER
Model	JDFCP518
Platform	P20S SHARE (20V Max)
Input Voltage	220-240V ~ 50/60Hz
Output Voltage	20V
Output Current	1.8A
Charge Indicator	LED Status Indicator
Compatibility	All JADEVER P20S Lithium-Ion Battery Packs
Packaging	Color Box

Product Features

1.8A fast intelligent charging for all JADEVER P20S 20V lithium-ion battery packs
LED charge status indicator for at-a-glance monitoring of charge progress
Built-in overcharge, over-discharge, and short-circuit protection for safe operation
Compatible with 220-240V mains supply for use across Southeast Asia and beyond
Compact, lightweight design for easy storage and transport
Compatible with all JADEVER P20S battery packs (2.0Ah, 4.0Ah, and higher)

JADEVER

Lithium-Ion Battery Pack 20V 4.0Ah

(0)

$23.21 $27.30

-15%

Lithium-Ion Battery Pack 20V 4.0Ah

The JADEVER JDLBP540 is a 20V Max 4.0Ah lithium-ion battery pack from the P20S SHARE platform, compatible with all JADEVER P20S cordless tools. With a built-in LED power indicator and high-capacity 4.0Ah cell, it delivers extended runtime for demanding jobsite applications.

Specifications

Brand	JADEVER
Model	JDLBP540
Platform	P20S SHARE (20V Max)
Voltage	20V Max
Capacity	4.0 Ah
Battery Type	Lithium-Ion
Power Indicator	LED Battery Level Indicator
Compatibility	All JADEVER P20S Cordless Tools

Product Features

20V Max 4.0Ah high-capacity lithium-ion cells for extended runtime on demanding tasks
P20S SHARE platform — one battery fits all JADEVER P20S cordless tools
Built-in LED battery power indicator for at-a-glance charge level monitoring
Lithium-ion chemistry for no memory effect and low self-discharge during storage
Durable housing with impact-resistant ABS for jobsite durability
Compatible with all JADEVER P20S drills, saws, grinders, and other cordless tools

JADEVER

TCT Saw Blade 235mm 40T

(0)

$6.55 $7.70

-15%

TCT Saw Blade 235mm 40T

The JADEVER JDTC1K07 is a 235mm (9-1/4") 40-tooth TCT (Tungsten Carbide Tipped) circular saw blade with a 30mm arbor and both 25.4mm and 16mm reduction rings included, designed for fine, smooth cross-cutting of wood, plywood, and timber. The 40T tooth configuration delivers cleaner cuts with minimal tear-out, ideal for finish carpentry and joinery.

Specifications

Brand	JADEVER
Model	JDTC1K07
Diameter	235 mm (9-1/4")
Teeth	40T
Arbor	30 mm
Reduction Rings	25.4 mm and 16 mm (included)
Tip Material	TCT (Tungsten Carbide)
Application	Wood Cutting (Fine Cut)
Max Speed	6,500 RPM
Packaging	Double Blister

Product Features

40T TCT tooth configuration for fine, smooth cross-cutting with minimal tear-out
Tungsten carbide tips for long-lasting sharpness and durability
235mm (9-1/4") diameter fits standard 235mm circular saws and mitre saws
30mm arbor with 25.4mm and 16mm reduction rings for broad saw compatibility
Anti-vibration slots for reduced noise and smoother cutting performance
Ideal for finish carpentry, joinery, plywood, MDF, and fine wood cross-cutting

JADEVER

TCT Saw Blade 210mm 24T

(0)

$3.81 $4.48

-15%

TCT Saw Blade 210mm 24T

The JADEVER JDTC1K14 is a 210mm (8-1/4") 24-tooth TCT (Tungsten Carbide Tipped) circular saw blade with a 30mm arbor and both 25.4mm and 16mm reduction rings included, designed for fast ripping and cross-cutting of wood, plywood, and timber. The 24T tooth configuration delivers aggressive, efficient cuts for general construction and carpentry applications.

Specifications

Brand	JADEVER
Model	JDTC1K14
Diameter	210 mm (8-1/4")
Teeth	24T
Arbor	30 mm
Reduction Rings	25.4 mm and 16 mm (included)
Tip Material	TCT (Tungsten Carbide)
Application	Wood Cutting
Max Speed	5,500 RPM

Product Features

24T TCT tooth configuration for fast, aggressive ripping and cross-cutting of wood
Tungsten carbide tips for long-lasting sharpness and durability
210mm (8-1/4") diameter fits standard 210mm circular saws and mitre saws
30mm arbor with 25.4mm and 16mm reduction rings for broad saw compatibility
Anti-vibration slots for reduced noise and smoother cutting performance
Ideal for ripping timber, cutting plywood, OSB, and general construction wood cutting

JADEVER

TCT Saw Blade 185mm 40T

(0)

$4.40 $5.18

-15%

TCT Saw Blade 185mm 40T

The JADEVER JDTC1K05 is a 185mm (7-1/4") 40-tooth TCT (Tungsten Carbide Tipped) circular saw blade with a 20mm arbor and 16mm reduction ring, designed for fine, smooth cross-cutting of wood, plywood, and timber. The 40T tooth configuration delivers cleaner, finer cuts compared to 24T blades, making it ideal for finish carpentry and joinery applications.

Specifications

Brand	JADEVER
Model	JDTC1K05
Diameter	185 mm (7-1/4")
Teeth	40T
Arbor	20 mm
Reduction Ring	16 mm (included)
Tip Material	TCT (Tungsten Carbide)
Application	Wood Cutting (Fine Cut)
Max Speed	5,500 RPM
Packaging	Double Blister

Product Features

40T TCT tooth configuration for fine, smooth cross-cutting with minimal tear-out
Tungsten carbide tips for long-lasting sharpness and durability
185mm (7-1/4") diameter fits all standard 185mm circular saws
20mm arbor with included 16mm reduction ring for broad compatibility
Anti-vibration slots for reduced noise and smoother cutting performance
Ideal for finish carpentry, joinery, plywood, MDF, and fine wood cross-cutting

JADEVER

TCT Saw Blade 185mm 24T

(0)

$2.86 $3.36

-15%

TCT Saw Blade 185mm 24T

The JADEVER JDTC1K04 is a 185mm (7-1/4") 24-tooth TCT (Tungsten Carbide Tipped) circular saw blade with a 20mm arbor and 16mm reduction ring, designed for fast, clean ripping and cross-cutting of wood, plywood, and timber. The 24T tooth configuration delivers aggressive, efficient cuts for general construction and carpentry applications.

Specifications

Brand	JADEVER
Model	JDTC1K04
Diameter	185 mm (7-1/4")
Teeth	24T
Arbor	20 mm
Reduction Ring	16 mm (included)
Tip Material	TCT (Tungsten Carbide)
Application	Wood Cutting
Max Speed	5,500 RPM
Packaging	Double Blister

Product Features

24T TCT tooth configuration for fast, aggressive ripping and cross-cutting of wood
Tungsten carbide tips for long-lasting sharpness and durability
185mm (7-1/4") diameter fits all standard 185mm circular saws
20mm arbor with included 16mm reduction ring for broad compatibility
Anti-vibration slots for reduced noise and smoother cutting performance
Ideal for ripping timber, cutting plywood, OSB, and general construction wood cutting

JADEVER

Dry Diamond Disc 180mm

(0)

$3.09 $3.64

-15%

Dry Diamond Disc 180mm

The JADEVER JDDC1K04 is a 180mm (7") segmented dry diamond disc with a 22.2mm bore and 7.5mm blade width, certified to EN 13236. Designed for fast cutting of concrete, stone, brick, and masonry in both dry and wet conditions, it delivers clean, precise cuts with minimal chipping.

Specifications

Brand	JADEVER
Model	JDDC1K04
Diameter	180 mm (7")
Bore	22.2 mm (7/8")
Blade Width	7.5 mm
Segment Type	Segmented (Fast Cut)
Cutting Mode	Dry and Wet
Max Speed	8,500 RPM
Standard	EN 13236
Packaging	Double Blister

Product Features

Segmented diamond rim for fast, aggressive cutting in concrete, stone, brick, and masonry
Suitable for both dry and wet cutting applications
7.5mm blade width for stable, straight cuts with minimal deviation
22.2mm bore fits standard angle grinders and cut-off saws
EN 13236 certified for safety and performance compliance
Max 8,500 RPM for use with 180mm angle grinders
Ideal for construction, tiling, landscaping, and general masonry cutting

JADEVER

SDS Plus Flat Chisel 14x250x20mm

(0)

$1.31 $1.54

-15%

SDS Plus Flat Chisel 14x250x20mm

The JADEVER JDGZ1202 is a 14x250x20mm SDS Plus flat chisel made from chrome-vanadium steel with a sandblasted surface finish, designed for chipping, grooving, and surface preparation on concrete, brick, and tile. The wide 20mm flat blade distributes impact force across a broader surface for efficient material removal.

Specifications

Brand	JADEVER
Model	JDGZ1202
Shank Type	SDS Plus
Shank Diameter	14 mm
Total Length	250 mm
Blade Width	20 mm
Tip Type	Flat
Material	Chrome-Vanadium Steel
Surface Finish	Sandblasted
Application	Concrete, Brick, Tile Removal
Packaging	Plastic Hanger with Plastic Cover

Product Features

20mm flat blade for efficient chipping, grooving, and surface preparation
Chrome-vanadium steel construction for superior toughness and impact resistance
SDS Plus shank for secure, tool-free engagement on all SDS Plus rotary hammers
Sandblasted surface finish for reduced friction and improved durability
250mm length for good reach and leverage during demolition work
Ideal for tile removal, concrete surface prep, grooving, and general masonry chipping

Sika

Sikaflex®-11 FC+

(0)

$6.89 $8.10

-15%

Sikaflex®-11 FC+

A 1-part multipurpose elastic adhesive and joint sealant with excellent application properties. Bonds and seals most construction material substrates without surface pre-treatment. Suitable for interior and exterior use with ±35% movement capability and very low VOC emissions.

Overview

Specifications

Property	Value
Type	1-component i-Cure® polyurethane adhesive-sealant
Density	~1.35 kg/L (ISO 1138-1)
Shore A Hardness	~37 (after 28 days, ISO 868)
Tensile Strength	~1.5 N/mm² (ISO 37)
Secant Tensile Modulus	~0.60 N/mm² at 100% elongation (ISO 8339)
Elastic Recovery	~80% (ISO 7389)
Tear Propagation Resistance	~8.0 N/mm (ISO 34)
Movement Capability	±35% (ASTM C719)
Service Temperature	−40°C min / +80°C max
Skinning Time	~70 minutes at +23°C / 50% R.H.
Curing Rate	~3.5 mm / 24 hours at +23°C / 50% R.H.
Sag Flow	~1 mm (20 mm profile, +23°C, ISO 7390)
Shelf Life	15 months from date of production
Storage	Dry, +5°C to +25°C, original sealed packaging

Usage

Bonding construction components: concrete, masonry, reconstituted/cast stone, ceramic, wood, metal, glass
Sealing vertical and horizontal joints
Interior and exterior applications

Advantages

Movement capability of ±35% (ASTM C719)
Bonds well to most substrates without surface pre-treatment
Good mechanical and weathering resistance
Very low emissions – GEV-Emicode EC1PLUS, LEED v4 compliant, Class A+ (French VOC regulation)
CE marked per EN 15651-1 and EN 15651-4
IBU Environmental Product Declaration (EPD) available

Packaging

300 ml cartridge (12 cartridges per box)
600 ml cylindrical foil pack (20 foil packs per box)

Colour

White
Grey

Product Details

Product Information

Property	Detail
Composition	i-Cure technology polyurethane (1-component)
Certifications	CE marking EN 15651-1 & EN 15651-4; ASTM C920-11 Class 35; ISEGA Certificate No. 43792 U 16
Shelf Life	15 months from date of production
Storage Conditions	Dry, +5°C to +25°C, original sealed packaging
Density	~1.35 kg/L (ISO 1138-1)

Technical Information – Joint Design

Joint Distance (m)	Min. Joint Width (mm)	Min. Joint Depth (mm)
2	10	10
4	15	10
6	20	10
8	30	15
10	35	17

Technical Information – Yield (Sealing)

Joint Width (mm)	Joint Depth (mm)	Yield per 300ml Cartridge (m)	Yield per 600ml Foil Pack (m)
10	10	3.0	6.0
15	12	1.6	3.2
20	17	0.9	1.8
25	20	0.6	1.2
30	25	0.4	0.8

Application

Application Information

Parameter	Value
Ambient Temperature	+5°C min / +40°C max
Substrate Temperature	+5°C min / +40°C max (min. 3°C above dew point)
Skinning Time	~70 minutes at +23°C / 50% R.H.
Curing Rate	~3.5 mm / 24 hours at +23°C / 50% R.H.

Application Steps

Substrate Preparation: Surface must be sound, clean, dry, and free from dirt, oil, grease, cement laitance, old sealants, and poorly bonded coatings. Use wire brushing, grinding, or sanding to remove weak material. Remove all dust before application.
Priming – Non-Porous Substrates: Aluminium, anodised aluminium, stainless steel, PVC, galvanised steel, powder-coated metals, glazed tiles: lightly abrade, then apply Sika® Cleaner P or Sika® Aktivator-205 with a clean cloth. Wait >15 min (<6 hours) before bonding. Other metals (copper, brass, titanium-zinc): apply Sika® Cleaner P or Aktivator-205, wait >15 min, then prime with Sika® Primer-3 N. Wait >30 min (<8 hours). PVC: apply Sika® Primer-215, wait >15 min (<8 hours).
Priming – Porous Substrates: Concrete, aerated concrete, cement renders, bricks: prime with Sika® Primer-3 N by brush. Wait >30 min (<8 hours) before bonding/sealing.
Application: Insert backing rod if required. Cut nozzle to desired bead size. Apply sealant into joint ensuring full contact with adhesion area. Tool immediately for smooth finish. Use Sika® Tooling Agent N if required.
Cleaning: Clean tools immediately with Sika® Remover-208. For skin cleaning use Sika® Cleaning Wipes-100. Cured material can only be removed mechanically.

JADEVER

SDS Plus Pointed Chisel 14x250mm

(0)

$1.31 $1.54

-15%

SDS Plus Pointed Chisel 14x250mm

The JADEVER JDGZ1201 is a 14x250mm SDS Plus pointed chisel made from chrome-vanadium steel with a sandblasted surface finish, designed for breaking, chipping, and demolishing concrete, brick, and masonry. The pointed tip concentrates impact force for precise material removal in tight areas.

Specifications

Brand	JADEVER
Model	JDGZ1201
Shank Type	SDS Plus
Diameter	14 mm
Total Length	250 mm
Tip Type	Pointed
Material	Chrome-Vanadium Steel
Surface Finish	Sandblasted
Application	Concrete, Brick, Masonry Breaking
Packaging	Plastic Hanger with Plastic Cover

Product Features

Pointed tip concentrates impact force for precise breaking and chipping in tight areas
Chrome-vanadium steel construction for superior toughness and impact resistance
SDS Plus shank for secure, tool-free engagement on all SDS Plus rotary hammers
Sandblasted surface finish for reduced friction and improved durability
250mm length for good reach and leverage during demolition work
Ideal for breaking concrete, removing tiles, chipping brick, and general masonry demolition

JADEVER

SDS Max Hammer Drill Bit 16x280mm

(0)

$3.81 $4.48

-15%

SDS Max Hammer Drill Bit 16x280mm

The JADEVER JDHD01626 is a heavy-duty 16x280mm SDS Max hammer drill bit with a high-quality TCT (Tungsten Carbide Tip), designed for large-diameter hole drilling in concrete, marble, and brick. The SDS Max shank is engineered for high-power rotary hammers, delivering maximum energy transfer for fast penetration in demanding construction applications.

Specifications

Brand	JADEVER
Model	JDHD01626
Shank Type	SDS Max
Diameter	16 mm
Total Length	280 mm
Tip Material	TCT (Tungsten Carbide)
Application	Concrete, Marble, Brick

Product Features

SDS Max shank for use with high-power rotary hammers and demolition hammers
High-quality TCT tip for fast, precise penetration into concrete, marble, and brick
280mm length for deep-hole drilling in thick structural elements
16mm diameter for extra-large anchor bolt and heavy conduit installations
Double flute design for efficient debris removal during drilling
Ideal for structural anchor installation, heavy conduit, and large-diameter masonry drilling

JADEVER

SDS Max Hammer Drill Bit 14x280mm

(0)

$3.33 $3.92

-15%

SDS Max Hammer Drill Bit 14x280mm

The JADEVER JDHD01426 is a heavy-duty 14x280mm SDS Max hammer drill bit with a high-quality TCT (Tungsten Carbide Tip), designed for large-diameter hole drilling in concrete, marble, and brick. The SDS Max shank is engineered for high-power rotary hammers, delivering maximum energy transfer for fast penetration in demanding construction applications.

Specifications

Brand	JADEVER
Model	JDHD01426
Shank Type	SDS Max
Diameter	14 mm
Total Length	280 mm
Tip Material	TCT (Tungsten Carbide)
Application	Concrete, Marble, Brick

Product Features

SDS Max shank for use with high-power rotary hammers and demolition hammers
High-quality TCT tip for fast, precise penetration into concrete, marble, and brick
280mm length for deep-hole drilling in thick structural elements
14mm diameter for large anchor bolt and heavy conduit installations
Double flute design for efficient debris removal during drilling
Ideal for structural anchor installation, heavy conduit, and large-diameter masonry drilling

JADEVER

SDS Plus Hammer Drill Bit 12x160mm

(0)

$0.83 $0.98

-15%

SDS Plus Hammer Drill Bit 12x160mm

The JADEVER JDHD1208 is a 12x160mm SDS Plus hammer drill bit with a high-quality TCT (Tungsten Carbide Tip) and chrome-vanadium steel body, designed for fast, precise drilling in concrete, brick, and masonry. The extended 160mm length and 12mm diameter make it ideal for larger anchor bolt and conduit installations, while the sandblasted surface finish reduces friction and improves chip evacuation.

Specifications

Brand	JADEVER
Model	JDHD1208
Shank Type	SDS Plus
Diameter	12 mm
Total Length	160 mm
Tip Material	TCT (Tungsten Carbide)
Body Material	Chrome-Vanadium Steel
Surface Finish	Sandblasted
Application	Concrete, Brick, Masonry

Product Features

High-quality TCT tip for fast, precise penetration into concrete, brick, and masonry
Chrome-vanadium steel body for superior toughness and resistance to impact fatigue
SDS Plus shank for secure, tool-free chuck engagement on all SDS Plus rotary hammers
Extended 160mm length for deep anchor bolt and conduit drilling
Sandblasted surface finish reduces friction and improves chip evacuation
Double flute design for efficient debris removal during drilling
Ideal for M10-M12 anchor bolt installation, large conduit, and heavy masonry drilling

Sika

Sikaflex®-140 Construction

(0)

From $7.63 $8.98

-15%

Sikaflex®-140 Construction

A 1-part polyurethane elastic joint sealant for durably sealing connection and movement joints in concrete and masonry facades. Bubble-free curing, ±25% movement capability, and excellent adhesion to most construction materials. LEED® v4 compliant.

Overview

Specifications

Property	Value
Type	1-component polyurethane elastic joint sealant
Density	(1.25 ± 0.1) kg/L (ISO 1183-1)
Shore A Hardness	35 (cured 28 days at +23°C / 50% R.H.)
Secant Tensile Modulus	0.30 N/mm² at 60% elongation (cured 28 days)
Elastic Recovery	70% at 100% elongation for 24 hours
Tear Propagation Resistance	6.0 N/mm (cured 7 days)
Elongation at Break	800% at −20°C (cured 7 days)
Movement Capability	±25% (ASTM C719)
Service Temperature	−40°C min / +70°C max
Skin Time	~120 minutes at +23°C / 50% R.H.
Tooling Time	~100 minutes at +23°C / 50% R.H.
Curing Rate	~2 mm / 24 hours at +23°C / 50% R.H.
Shelf Life	12 months from date of production
Storage	Dry, +5°C to +30°C, original sealed packaging

Usage

Interior and exterior joint sealing on building facades
Around window and door frames
Around precast and prefabricated elements
Floor and wall construction joints
General purpose construction sealant

Advantages

Easy to extrude and tool
Movement capability of ±25% (ASTM C719)
Good adhesion to many construction materials
Bubble-free curing
Can be overpainted with most conventional paint systems
LEED® v4 compliant – contributes to Indoor Environmental Quality (EQ) Credit: Low-Emitting Materials

Packaging

600 ml foil pack
Box of 20 foil packs

Colour

Grey
White

Product Details

Product Information

Property	Detail
Composition	Sika i-Cure® polyurethane (1-component)
Product Declaration	ASTM C920-18: Type S, Grade NS, Class 25, Use T1, NT, M
Shelf Life	12 months from date of production
Storage Conditions	Dry, +5°C to +30°C, original sealed packaging
Density	(1.25 ± 0.1) kg/L (ISO 1183-1)

Technical Information

Property	Value	Standard / Condition
Shore A Hardness	35	Cured 28 days, +23°C / 50% R.H.
Secant Tensile Modulus	0.30 N/mm²	60% elongation, cured 28 days
Elastic Recovery	70%	100% elongation for 24 hours
Tear Propagation Resistance	6.0 N/mm	Cured 7 days
Elongation at Break	800%	At −20°C, cured 7 days
Movement Capability	±25%	ASTM C719
Sag Flow	2 mm	20 mm profile at +50°C
Curing Rate	~2 mm / 24 hours	+23°C / 50% R.H.

Joint Design

Movement joints: min. 8 mm wide, max. 40 mm wide
Non-movement joints: can be less than 8 mm wide
Minimum depth: 8 mm, or width:depth ratio of 1:0.5 (facade) / 1:0.8 (floor), whichever is greater
Use closed-cell polyethylene foam backing rod

Application

Application Information

Parameter	Value
Ambient Temperature	+5°C min / +40°C max
Substrate Temperature	+5°C min / +40°C max (min. 3°C above dew point)
Product Temperature	+5°C min / +40°C max
Skin Time	~120 minutes at +23°C / 50% R.H.
Tooling Time	~100 minutes at +23°C / 50% R.H.
Curing Rate	~2 mm / 24 hours at +23°C / 50% R.H.

Application Steps

Substrate Preparation: Surface must be sound, clean, dry, and free from dirt, oil, grease, cement laitance, sealant residues, and poorly bonded coatings. Use wire brushing, grinding, or grit blasting to remove weak material. Repair damaged joint edges with suitable Sika repair products.
Priming – Non-Porous Substrates: Aluminium, stainless steel, galvanised steel, glazed tiles: lightly abrade, clean, then apply Sika® Aktivator-205 with a clean cloth. Other metals (copper, brass, titanium-zinc): abrade, clean, apply Sika® Aktivator-205, wait flash-off time, then prime with Sika® Primer-3 N. PVC: prime with Sika® Primer-215.
Priming – Porous Substrates: Concrete, aerated concrete, cement renders, bricks: prime with Sika® Primer-3 N or Sika® Primer-115. Concrete 2–3 days old or matt wet: use Sika® Primer-115.
Application: Apply masking tape if required. Insert backing rod to required depth. Prime joint surfaces. Open foil pack, fit nozzle, cut to desired bead size, and insert into application gun. Apply sealant into joint avoiding air entrapment. Tool firmly against joint sides immediately using Sika® Tooling Agent N. Remove masking tape within skin formation time.
Overpainting: Allow full cure before overpainting. Test paint compatibility per ISO/TR 20436:2017 before full application.
Do NOT use on: Natural stone (granite, marble, limestone), bitumen, natural rubber, EPDM rubber, or joints in swimming pools with chlorine treatment.

JADEVER

SDS Plus Hammer Drill Bit 10x160mm

(0)

$0.77 $0.91

-15%

SDS Plus Hammer Drill Bit 10x160mm

The JADEVER JDHD1207 is a 10x160mm SDS Plus hammer drill bit with a high-quality TCT (Tungsten Carbide Tip) and chrome-vanadium steel body, designed for fast, precise drilling in concrete, brick, and masonry. The extended 160mm length provides deeper reach, while the sandblasted surface finish reduces friction and improves chip evacuation for efficient drilling performance.

Specifications

Brand	JADEVER
Model	JDHD1207
Shank Type	SDS Plus
Diameter	10 mm
Total Length	160 mm
Tip Material	TCT (Tungsten Carbide)
Body Material	Chrome-Vanadium Steel
Surface Finish	Sandblasted
Application	Concrete, Brick, Masonry

Product Features

High-quality TCT tip for fast, precise penetration into concrete, brick, and masonry
Chrome-vanadium steel body for superior toughness and resistance to impact fatigue
SDS Plus shank for secure, tool-free chuck engagement on all SDS Plus rotary hammers
Extended 160mm length for deeper anchor bolt and conduit drilling
Sandblasted surface finish reduces friction and improves chip evacuation
Double flute design for efficient debris removal during drilling
Ideal for anchor bolt installation, electrical conduit, and general masonry drilling

JADEVER

SDS Plus Hammer Drill Bit 10x110mm

(0)

$0.65 $0.77

-16%

SDS Plus Hammer Drill Bit 10x110mm

The JADEVER JDHD1204 is a 10x110mm SDS Plus hammer drill bit with a high-quality TCT (Tungsten Carbide Tip) and chrome-vanadium steel body, designed for fast, precise drilling in concrete, brick, and masonry. The SDS Plus shank ensures secure, tool-free chuck engagement on all SDS Plus rotary hammers.

Specifications

Brand	JADEVER
Model	JDHD1204
Shank Type	SDS Plus
Diameter	10 mm
Total Length	110 mm
Tip Material	TCT (Tungsten Carbide)
Body Material	Chrome-Vanadium Steel
Surface Finish	Sandblasted
Application	Concrete, Brick, Masonry

Product Features

High-quality TCT tip for fast, precise penetration into concrete, brick, and masonry
Chrome-vanadium steel body for superior toughness and resistance to impact fatigue
SDS Plus shank for secure, tool-free chuck engagement on all SDS Plus rotary hammers
Sandblasted surface finish reduces friction and improves chip evacuation
Double flute design for efficient debris removal during drilling
Ideal for anchor bolt installation, electrical conduit, and general masonry drilling

JADEVER

SDS Plus Hammer Drill Bit 8x160mm

(0)

$0.71 $0.84

-15%

SDS Plus Hammer Drill Bit 8x160mm

The JADEVER JDHD1206 is an 8x160mm SDS Plus hammer drill bit with a high-quality TCT (Tungsten Carbide Tip) and chrome-vanadium steel body, designed for fast, precise drilling in concrete, brick, and masonry. The extended 160mm length provides deeper reach, while the sandblasted surface finish reduces friction and improves chip evacuation for efficient drilling performance.

Specifications

Brand	JADEVER
Model	JDHD1206
Shank Type	SDS Plus
Diameter	8 mm
Total Length	160 mm
Tip Material	TCT (Tungsten Carbide)
Body Material	Chrome-Vanadium Steel
Surface Finish	Sandblasted
Application	Concrete, Brick, Masonry

Product Features

High-quality TCT tip for fast, precise penetration into concrete, brick, and masonry
Chrome-vanadium steel body for superior toughness and resistance to impact fatigue
SDS Plus shank for secure, tool-free chuck engagement on all SDS Plus rotary hammers
Extended 160mm length for deeper anchor bolt and conduit drilling
Sandblasted surface finish reduces friction and improves chip evacuation
Double flute design for efficient debris removal during drilling
Ideal for anchor bolt installation, electrical conduit, and general masonry drilling

Sika

Sika Boom® AP

(0)

$8.93 $10.50

-15%

Sika Boom® AP

A 1-component, fast-curing polyurethane expanding foam for multi-position applications. Fixes, insulates, and fills connection joints around window and door frames, pipe entries, and vents in a single application. HFC-free and easy to apply with a nozzle in any position.

Overview

Specifications

Property	Value
Type	1-component polyurethane expanding foam
Density (cured)	~24 kg/m³
Compressive Strength	~0.04 N/mm² at 10% deformation (ISO 844)
Tensile Strength	~0.01 N/mm² (ISO 1926)
Shear Strength	~0.04 N/mm² (ISO 1922)
Thermal Conductivity	~0.030 W/mK (EN 12667)
Service Temperature	−40°C min / +90°C max
Dimensional Stability	±~5%
Tack Free Time	~10 minutes
Cutting Time	~30–60 minutes
Full Cure	24 hours
Shelf Life	12 months (opened cans: use within 4 weeks)
Storage	Upright, dry, +5°C to +25°C, away from direct sunlight

Usage

Fixing, insulating, and filling connection joints around window and door frames
Pipe entries, air conditioning vents, and roller blind housings
Insulation against noise, cold, and draughts in a single application

Advantages

1-component – ready to use
Multi-position foam – application in all positions including overhead
Easy application with nozzle
High expansion rate (~25L from 500ml can)
Fast curing – tack free in ~10 minutes
Very good thermal and sound insulation
Can be cut, sanded, and over-painted
HFC-free

Packaging

500 ml can (~25L yield)

Colour

Light Yellow (cured)

Product Details

Product Information

Property	Detail
Composition	Polyurethane (1-component)
Shelf Life	12 months from date of production; opened cans must be used within 4 weeks
Storage Conditions	Upright, dry, +5°C to +25°C, away from direct sunlight
Density (cured)	~24 kg/m³

Technical Information

Property	Value	Standard
Compressive Strength	~0.04 N/mm² (10% deformation)	ISO 844
Tensile Strength	~0.01 N/mm²	ISO 1926
Shear Strength	~0.04 N/mm²	ISO 1922
Dimensional Stability	±~5%	–
Thermal Conductivity	~0.030 W/mK	EN 12667
Water Vapour Permeability	μ = 21, sd = 1.0 m (d = 49 mm, p = 19.5 kg/m³)	ISO 12572
Service Temperature	−40°C min / +90°C max	–

Application

Application Information

Parameter	Optimum	Permissible Range
Ambient Temperature	+20°C	+5°C to +40°C
Substrate Temperature	+20°C	+5°C to +40°C
Tack Free Time	~10 minutes
Cutting Time	~30–60 minutes
Full Cure	24 hours

Consumption

500 ml can → ~25 L expanded foam
750 ml can → ~38 L expanded foam
850 ml can → ~45 L expanded foam
Consumption can be regulated by adjusting pressure on the valve

Application Steps

Substrate Preparation: Surface must be clean, sound, and free from oils, grease, dust, and loose particles. Remove paint, cement laitance, and poorly adhering contaminants. No primer or activator required. Pre-dampen the substrate with a mist spray of clean water to ensure proper curing and prevent secondary foam expansion.
Application: Shake can well before use. Attach nozzle and apply foam into the joint or gap, filling to approximately 50% of the void depth as the foam will expand. Apply in all positions including overhead. Adjust pressure on the valve to control output.
Cutting & Finishing: Allow ~30–60 minutes before cutting. Once cured, the foam can be cut, sanded, and over-painted.
Cleaning: Clean tools immediately with Sika Boom® Cleaner and/or Sika® Remover-208. Cured residual material can only be removed mechanically.

JADEVER

SDS Plus Hammer Drill Bit 8x110mm

(0)

$0.60 $0.70

-14%

SDS Plus Hammer Drill Bit 8x110mm

The JADEVER JDHD1203 is an 8x110mm SDS Plus hammer drill bit with a high-quality TCT (Tungsten Carbide Tip) and chrome-vanadium steel body, designed for fast, precise drilling in concrete, brick, and masonry. The SDS Plus shank ensures secure, tool-free chuck engagement on all SDS Plus rotary hammers.

Specifications

Brand	JADEVER
Model	JDHD1203
Shank Type	SDS Plus
Diameter	8 mm
Total Length	110 mm
Tip Material	TCT (Tungsten Carbide)
Body Material	Chrome-Vanadium Steel
Surface Finish	Sandblasted
Application	Concrete, Brick, Masonry

Product Features

High-quality TCT tip for fast, precise penetration into concrete, brick, and masonry
Chrome-vanadium steel body for superior toughness and resistance to impact fatigue
SDS Plus shank for secure, tool-free chuck engagement on all SDS Plus rotary hammers
Sandblasted surface finish reduces friction and improves chip evacuation
Double flute design for efficient debris removal during drilling
Ideal for anchor bolt installation, electrical conduit, and general masonry drilling

JADEVER

SDS Plus Hammer Drill Bit 6x160mm

(0)

$0.71 $0.84

-15%

SDS Plus Hammer Drill Bit 6x160mm

The JADEVER JDHD1205 is a 6x160mm SDS Plus hammer drill bit with a high-quality TCT (Tungsten Carbide Tip) and chrome-vanadium steel body, designed for fast, precise drilling in concrete, brick, and masonry. The extended 160mm length provides deeper reach, while the sandblasted surface finish reduces friction and improves chip evacuation for efficient drilling performance.

Specifications

Brand	JADEVER
Model	JDHD1205
Shank Type	SDS Plus
Diameter	6 mm
Total Length	160 mm
Tip Material	TCT (Tungsten Carbide)
Body Material	Chrome-Vanadium Steel
Surface Finish	Sandblasted
Application	Concrete, Brick, Masonry

Product Features

High-quality TCT tip for fast, precise penetration into concrete, brick, and masonry
Chrome-vanadium steel body for superior toughness and resistance to impact fatigue
SDS Plus shank for secure, tool-free chuck engagement on all SDS Plus rotary hammers
Extended 160mm length for deeper anchor bolt and conduit drilling
Sandblasted surface finish reduces friction and improves chip evacuation
Double flute design for efficient debris removal during drilling
Ideal for anchor bolt installation, electrical conduit, and general masonry drilling

JADEVER

SDS Plus Hammer Drill Bit 6x110mm

(0)

$0.60 $0.70

-14%

SDS Plus Hammer Drill Bit 6x110mm

The JADEVER JDHD1202 is a 6x110mm SDS Plus hammer drill bit with a high-quality TCT (Tungsten Carbide Tip) and chrome-vanadium steel body, designed for fast, precise drilling in concrete, brick, and masonry. The sandblasted surface finish reduces friction and improves chip evacuation for efficient drilling performance.

Specifications

Brand	JADEVER
Model	JDHD1202
Shank Type	SDS Plus
Diameter	6 mm
Total Length	110 mm
Tip Material	TCT (Tungsten Carbide)
Body Material	Chrome-Vanadium Steel
Surface Finish	Sandblasted
Application	Concrete, Brick, Masonry

Product Features

High-quality TCT tip for fast, precise penetration into concrete, brick, and masonry
Chrome-vanadium steel body for superior toughness and resistance to impact fatigue
SDS Plus shank for secure, tool-free chuck engagement on all SDS Plus rotary hammers
Sandblasted surface finish reduces friction and improves chip evacuation
Double flute design for efficient debris removal during drilling
Ideal for anchor bolt installation, electrical conduit, and general masonry drilling

JADEVER

Impact Screwdriver Bits PH2 250mm 2pcs

(0)

$2.37 $2.79

-15%

Impact Screwdriver Bits PH2 250mm 2pcs

The JADEVER JDSV6K66 is a 2-piece set of 250mm extra-long PH2 impact screwdriver bits made from S2 steel with an optimized shock zone for superior impact resistance. The extended 250mm length provides deep reach into recessed areas, while the magnetic tip and high-visibility green sleeve make them ideal for use with impact drivers and power drills in demanding fastening applications.

Specifications

Brand	JADEVER
Model	JDSV6K66
Pieces	2
Tip Type	PH2 (Phillips)
Length	250 mm
Material	S2 Steel
Shank	1/4" Hex
Tip	Magnetic
Sleeve	High-Visibility Green
Application	Impact Driver / Power Drill
Packaging	Blister Card

Product Features

Extra-long 250mm length for deep reach into recessed cavities and tight spaces
S2 steel construction for superior hardness and toughness under impact
Optimized shock zone absorbs and distributes impact energy to extend bit life
Magnetic PH2 tip securely holds screws for one-handed fastening
High-visibility green sleeve for easy identification in the toolbox
1/4" hex shank fits all standard impact drivers and power drills
Ideal for decking, framing, electrical installation, and deep-cavity fastening

JADEVER

Impact Screwdriver Bits PH2+SL6 65mm 2pcs

(0)

$0.65 $0.77

-16%

Impact Screwdriver Bits PH2+SL6 65mm 2pcs

The JADEVER JDSV3K63 is a 2-piece set of 65mm double-ended impact screwdriver bits combining PH2 Phillips and SL6.0 slotted tips, made from S2 steel with an optimized shock zone for superior impact resistance. The high-visibility green sleeve and magnetic tips make them ideal for use with impact drivers and power drills in demanding fastening applications.

Specifications

Brand	JADEVER
Model	JDSV3K63
Pieces	2
Tip Type	PH2 (Phillips) + SL6.0x1.0 (Slotted)
Length	65 mm
Material	S2 Steel
Shank	1/4" Hex
Tip	Magnetic
Sleeve	High-Visibility Green
Application	Impact Driver / Power Drill
Packaging	Blister Card

Product Features

Double-ended design: PH2 Phillips on one end, SL6.0 slotted on the other
S2 steel construction for superior hardness and toughness under impact
Optimized shock zone absorbs and distributes impact energy to extend bit life
Magnetic tips securely hold screws for one-handed fastening
High-visibility green sleeve for easy identification in the toolbox
1/4" hex shank fits all standard impact drivers and power drills
Ideal for electrical installation, furniture assembly, and general construction fastening

JADEVER

Utility Knife Blades 19x61mm 10pcs

(0)

$0.77 $0.91

-15%

Utility Knife Blades 19x61mm 10pcs

The JADEVER JDMK1K61 is a set of 10 high-carbon steel utility knife blades sized 19x61mm, compatible with all standard 19mm utility knives. Stored in a compact plastic box for safe handling and storage, they are ideal for cutting cardboard, carpet, drywall, packaging, and general construction materials.

Specifications

Brand	JADEVER
Model	JDMK1K61
Pieces	10
Blade Size	19 x 61 mm
Blade Color	White (Silver)
Material	High-Carbon Steel (SK5)
Compatibility	Standard 19mm Utility Knives
Packaging	Plastic Box

Product Features

10-piece set for extended use before replacement is needed
19x61mm size compatible with all standard 19mm utility knives
High-carbon SK5 steel for a sharp, long-lasting cutting edge
Snap-off design for quick blade renewal when edge dulls
Compact plastic box for safe storage and easy blade dispensing
Ideal for cutting cardboard, carpet, drywall, vinyl, packaging, and general construction materials

JADEVER

Hose Quick Connector Set 3pcs

(0)

$1.55 $1.82

-15%

Hose Quick Connector Set 3pcs

The JADEVER JDQC2E33 is a complete 3-piece hose quick connector set made from ABS, PP, and POM, covering all the essential fittings for a standard garden hose setup. The set includes a water-stop connector, a standard hose connector, and a 3/4" tap adapter for a full plug-and-play hose connection system.

Specifications

Brand	JADEVER
Model	JDQC2E33
Pieces	3
Material	ABS + PP + POM
Included (1 pc)	1/2" Plastic Hose Quick Connector with Water Stop
Included (1 pc)	1/2" Plastic Hose Quick Connector
Included (1 pc)	3/4" Tap Adapter with Reducer
Connection Type	Quick-Connect (Snap-In)
Packaging	Paper Card

Product Features

Complete 3-piece set for a full garden hose quick-connect system
Water-stop connector automatically shuts off flow when hose is disconnected
1/2" hose quick connector for standard hose-to-accessory connections
3/4" tap adapter with reducer ring for compatibility with both 1/2" and 3/4" outdoor taps
ABS + PP + POM construction for durability, UV resistance, and chemical compatibility
Snap-in locking mechanism for fast, tool-free attachment and detachment
Ideal for garden irrigation, hose extension, and outdoor water system connections

Drawer menu

Product Comparison

All Products

Drawer menu

Explore Related Collections

All Products