Construction Tools

	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

TOTAL

Green Laser Level 5-Line 30m TOTAL TLL305205

(0)

$119.80

Self-Levelling Green Laser Level 5-Line 30m — TOTAL TLL305205

Professional 5-line green laser level with 1 horizontal and 4 vertical lines covering a 30m working range. Features cross lock function, laser gain for bright environments, and fast <3s self-levelling. Powered by 4× AA batteries with a hard plastic carry case included.

Specifications

Attribute	Detail
Model No.	TLL305205
Laser Color	Green
Laser Class	Class 3R <5mW
Laser Lines	5 lines — 1 horizontal + 4 vertical
Working Range	0 – 30m
Levelling Accuracy	±1.0mm @ 5m
Line Accuracy	±1.5mm @ 5m
Self-Levelling Angle	≤3°
Levelling Time	<3 seconds
Cross Lock Function	Yes
Laser Gain Function	Yes
Power Source	4× LR6 AA 1.5V batteries
Weight (without batteries)	980g
Operating Temperature	0–+40℃
Storage Temperature	-20–+70℃
Tripod	Not included (compatible with TLLT01152)
Packaging	Hard plastic carry case

What's in the Box

1× TOTAL Green Laser Level (TLL305205)
1× Laser safety glasses
1× USB charging cable & adapter
4× AA batteries
1× Hard plastic carry case

Materials & Care

Class 3R laser — avoid direct eye exposure at all times
Store in the provided case to protect optics and housing
Remove batteries if storing for extended periods
Keep lens clean with a soft, dry cloth; avoid abrasive cleaners
Compatible tripod: TOTAL TLLT01152 (sold separately)

TOTAL

Intelligent Self-Priming Pump 370W TOTAL TWP113706

(0)

$70.72

Intelligent Self-Priming Pump 370W TOTAL TWP113706

The TOTAL TWP113706 is a 370W (0.5HP) intelligent self-priming pump with a 100% copper wire motor, brass impeller, and built-in intelligent control system. Delivers 35m max head and 35L/min max flow with automatic start/stop, dry-run protection, and a 2L built-in pressure tank.

Specifications

Brand	TOTAL
Model	TWP113706
Rated Power	370W (0.5HP)
Input Voltage	220–240V ~ 50Hz
Max. Head	35m
Max. Flow	35 L/min
Max. Suction	8m
Pipe Diameter	1" × 1"
Motor	100% copper wire
Impeller	Brass
Pressure Tank	2L built-in
Cable Length	1.5m with VDE plug

Product Features

Intelligent control system with Power, Pressure, and Flow LED indicators
Automatic start/stop — activates on demand and stops when not in use
Smart standby mode for energy saving
Water shortage protection — auto-stops to prevent dry-run damage
Water leakage protection for added safety
2L built-in pressure tank for consistent water pressure
100% copper wire motor for efficient, long-lasting operation
Brass impeller and stainless steel welded shaft for durability and corrosion resistance

JADEVER

Line Laser 5-Line Green JADEVER JDLE2M05

(0)

$69.02

Self-Leveling Line Laser 5-Line Green

The JADEVER JDLE2M05 is a professional 5-line green beam self-leveling laser level with a 0-30m working range. Projecting one 360° horizontal plane and four vertical lines, it delivers ±2mm@5m accuracy for precise layout work in construction, tiling, framing, and interior fit-out. Supplied with a carry bag, remote control, and magnetic bracket.

Specifications

Brand	JADEVER
Model	JDLE2M05
Laser Color	Green
Number of Lines	5
Working Range	0 - 30 m
Horizontal Lines	1 x 360° Full Horizontal Plane
Vertical Lines	4 Vertical Lines
Levelling Accuracy	±2 mm @ 5 m
Line Accuracy	±2 mm @ 5 m
Included Accessories	Carry Bag, Remote Control, Magnetic Bracket
Packaging	Color Box

Product Features

Green laser beams for up to 4x better visibility than red laser in bright conditions
5-line projection: 1 x 360° horizontal plane + 4 vertical lines for full-room layout
Self-leveling within ±4° for fast, accurate setup on any surface
±2mm@5m accuracy for professional-grade alignment and layout work
0-30m working range for large indoor spaces and open areas
Remote control for convenient line switching without touching the unit
Magnetic bracket for flexible mounting on metal surfaces and standard tripods
Supplied in a carry bag for safe storage and transport
Ideal for tiling, framing, suspended ceilings, partition walls, and interior fit-out

TOTAL

Magnetic Spirit Level

(0)

$11.09

Industrial Magnetic Spirit Level 60cm 3-Vial — TOTAL TMT26086M

Industrial-grade 60cm magnetic spirit level with 3 solid vials for horizontal (180°), vertical (90°), and 45° readings. Built-in strong magnets for hands-free stability on metal surfaces, two precision-milled measuring surfaces on both sides, and heavy-duty rubber end caps. Accuracy: 0.5mm/m.

Specifications

Attribute	Detail
Model No.	TMT26086M
Grade	Industrial
Length	60cm (24")
Vials	3 solid vials (180° / 90° / 45°)
Accuracy	0.5mm/m
Aluminum Thickness	1.5mm
Magnetic	Yes — built-in strong magnets
Measuring Surfaces	Two precision-milled surfaces (both sides)
End Caps	Heavy-duty shock-absorbing rubber
Material	Aluminum, ABS, Rubber

What's in the Box

1× TOTAL Industrial Magnetic Spirit Level 60cm (TMT26086M)

Materials & Care

Body: 1.5mm extruded aluminum with ABS end caps and rubber bumpers
Wipe clean with a dry cloth; avoid solvents that may damage vials
Store flat or hanging to preserve vial accuracy
Do not drop — impact can shift vial calibration

TOTAL

Magnetic Spirit Level

(0)

$8.85

Industrial Magnetic Spirit Level 60cm 3-Vial — TOTAL TMT26028M

Industrial-grade 60cm magnetic spirit level with 3 solid vials for horizontal (180°), vertical (90°), and 45° readings. Built-in strong magnets for hands-free stability on metal surfaces, two precision-milled measuring surfaces on both sides, and heavy-duty rubber end caps. Accuracy: 0.5mm/m.

Specifications

Attribute	Detail
Model No.	TMT26028M
Grade	Industrial
Length	60cm (24")
Vials	3 solid vials (180° / 90° / 45°)
Accuracy	0.5mm/m
Aluminum Thickness	1.5mm
Magnetic	Yes — built-in strong magnets
Measuring Surfaces	Two precision-milled surfaces (both sides)
End Caps	Heavy-duty shock-absorbing rubber
Material	Aluminum, ABS, Rubber

What's in the Box

1× TOTAL Industrial Magnetic Spirit Level 60cm (TMT26028M)

Materials & Care

Body: 1.5mm extruded aluminum with ABS end caps and rubber bumpers
Wipe clean with a dry cloth; avoid solvents that may damage vials
Store flat or hanging to preserve vial accuracy
Do not drop — impact can shift vial calibration

TOTAL

Magnetic Spirit Level

(0)

$8.85

Industrial Magnetic Spirit Level 60cm 3-Vial — TOTAL TMT26028M

Industrial-grade 60cm magnetic spirit level with 3 solid vials for horizontal (180°), vertical (90°), and 45° readings. Built-in strong magnets for hands-free stability on metal surfaces, two precision-milled measuring surfaces on both sides, and heavy-duty rubber end caps. Accuracy: 0.5mm/m.

Specifications

Attribute	Detail
Model No.	TMT26028M
Grade	Industrial
Length	60cm (24")
Vials	3 solid vials (180° / 90° / 45°)
Accuracy	0.5mm/m
Aluminum Thickness	1.5mm
Magnetic	Yes — built-in strong magnets
Measuring Surfaces	Two precision-milled surfaces (both sides)
End Caps	Heavy-duty shock-absorbing rubber
Material	Aluminum, ABS, Rubber

What's in the Box

1× TOTAL Industrial Magnetic Spirit Level 60cm (TMT26028M)

Materials & Care

Body: 1.5mm extruded aluminum with ABS end caps and rubber bumpers
Wipe clean with a dry cloth; avoid solvents that may damage vials
Store flat or hanging to preserve vial accuracy
Do not drop — impact can shift vial calibration

TOTAL

Magnetic Spirit Level

(0)

$10.64

Industrial Magnetic Spirit Level 80cm 3-Vial — TOTAL TMT28028M

Industrial-grade 80cm magnetic spirit level with 3 solid vials for horizontal (180°), vertical (90°), and 45° readings. Four built-in strong magnets for hands-free stability on metal surfaces, two precision-milled measuring surfaces on both sides, and heavy-duty rubber end caps. Accuracy: 0.5mm/m.

Specifications

Attribute	Detail
Model No.	TMT28028M
Grade	Industrial
Length	80cm (32")
Vials	3 solid vials (180° / 90° / 45°)
Accuracy	0.5mm/m
Aluminum Thickness	1.5mm
Magnets	4× built-in strong magnets
Measuring Surfaces	Two precision-milled surfaces (both sides)
End Caps	Heavy-duty shock-absorbing rubber
Material	Aluminum, ABS, Rubber

What's in the Box

1× TOTAL Industrial Magnetic Spirit Level 80cm (TMT28028M)

Materials & Care

Body: 1.5mm extruded aluminum with ABS end caps and rubber bumpers
Wipe clean with a dry cloth; avoid solvents that may damage vials
Store flat or hanging to preserve vial accuracy
Do not drop — impact can shift vial calibration

TOTAL

Mason's Spirit Level

(0)

$9.18

Heavy-Duty Mason's Spirit Level 40cm — TOTAL TMT221406

Professional 40cm mason's level built to withstand the toughest job sites. Heavy-duty cast aluminum tapered body with a finely milled bottom surface, shock-absorbing rubber strike pads and end caps to handle trowel blows, and 0.5mm/m accuracy for reliable horizontal and vertical readings.

Specifications

Attribute	Detail
Model No.	TMT221406
Length	40cm (16")
Vials	2 solid vials (horizontal & vertical)
Accuracy	0.5mm/m
Body	Heavy-duty cast aluminum tapered body
Bottom Surface	Finely milled for precision contact
End Caps	Shock-absorbing rubber strike pads & end caps
Net Weight	450g
Packaging	Color sleeve

What's in the Box

1× TOTAL Heavy-Duty Mason's Level 40cm (TMT221406)

Materials & Care

Body: Cast aluminum with rubber strike pads and end caps
Wipe clean with a dry cloth; avoid solvents that may damage vials
Store flat or hanging to preserve vial accuracy
Do not drop — impact can shift vial calibration

TOTAL

Mason's Spirit Level 60cm 0.5mm/m TOTAL TMT221606

(0)

$9.97

Heavy-Duty Mason's Spirit Level 60cm — TOTAL TMT221606

Professional 60cm mason's level built for the toughest job sites. Heavy-duty cast aluminum tapered body with finely milled bottom and front surfaces, shock-absorbing rubber strike pads and end caps to handle trowel blows, and 0.5mm/m accuracy for reliable horizontal and vertical readings.

Specifications

Attribute	Detail
Model No.	TMT221606
Length	60cm (24")
Vials	2 solid vials (horizontal & vertical)
Accuracy	0.5mm/m
Body	Heavy-duty cast aluminum tapered body
Milled Surfaces	Bottom & front surface (finely milled)
End Caps	Shock-absorbing rubber strike pads & end caps
Net Weight	790g
Packaging	Color sleeve

What's in the Box

1× TOTAL Heavy-Duty Mason's Level 60cm (TMT221606)

Materials & Care

Body: Cast aluminum with rubber strike pads and end caps
Wipe clean with a dry cloth; avoid solvents that may damage vials
Store flat or hanging to preserve vial accuracy
Do not drop — impact can shift vial calibration

TOTAL

Mini Magnetic Spirit Level

(0)

$1.46

Mini Magnetic Spirit Level 225mm 3-Vial — TOTAL TMT2235

Compact 225mm magnetic spirit level with 3 solid vials for horizontal, vertical, and 45° readings. Aluminum and ABS body with built-in magnets for hands-free use on metal surfaces. Accuracy: 1mm/m.

Specifications

Attribute	Detail
Model No.	TMT2235
Length	225mm (9")
Vials	3 solid vials (horizontal, vertical, 45°)
Accuracy	1mm/m
Magnetic	Yes
Body Material	Aluminum & ABS plastic
Packaging	Color sleeve

What's in the Box

1× TOTAL Mini Magnetic Spirit Level 225mm (TMT2235)

Materials & Care

Body: Extruded aluminum frame with ABS end caps and rubber bumpers
Wipe clean with a dry cloth; avoid solvents that may damage vials
Store flat or hanging to preserve vial accuracy
Do not drop — impact can shift vial calibration

Sika

Multipurpose Elastic Adhesive Sealant 300ml Sika Sikaflex®-11 FC+

(0)

$6.89

Sikaflex®-11 FC+

A 1-part multipurpose elastic adhesive and joint sealant with excellent application properties. Bonds and seals most construction material substrates without surface pre-treatment. Suitable for interior and exterior use with ±35% movement capability and very low VOC emissions.

Overview

Specifications

Property	Value
Type	1-component i-Cure® polyurethane adhesive-sealant
Density	~1.35 kg/L (ISO 1138-1)
Shore A Hardness	~37 (after 28 days, ISO 868)
Tensile Strength	~1.5 N/mm² (ISO 37)
Secant Tensile Modulus	~0.60 N/mm² at 100% elongation (ISO 8339)
Elastic Recovery	~80% (ISO 7389)
Tear Propagation Resistance	~8.0 N/mm (ISO 34)
Movement Capability	±35% (ASTM C719)
Service Temperature	−40°C min / +80°C max
Skinning Time	~70 minutes at +23°C / 50% R.H.
Curing Rate	~3.5 mm / 24 hours at +23°C / 50% R.H.
Sag Flow	~1 mm (20 mm profile, +23°C, ISO 7390)
Shelf Life	15 months from date of production
Storage	Dry, +5°C to +25°C, original sealed packaging

Usage

Bonding construction components: concrete, masonry, reconstituted/cast stone, ceramic, wood, metal, glass
Sealing vertical and horizontal joints
Interior and exterior applications

Advantages

Movement capability of ±35% (ASTM C719)
Bonds well to most substrates without surface pre-treatment
Good mechanical and weathering resistance
Very low emissions – GEV-Emicode EC1PLUS, LEED v4 compliant, Class A+ (French VOC regulation)
CE marked per EN 15651-1 and EN 15651-4
IBU Environmental Product Declaration (EPD) available

Packaging

300 ml cartridge (12 cartridges per box)
600 ml cylindrical foil pack (20 foil packs per box)

Colour

White
Grey

Product Details

Product Information

Property	Detail
Composition	i-Cure technology polyurethane (1-component)
Certifications	CE marking EN 15651-1 & EN 15651-4; ASTM C920-11 Class 35; ISEGA Certificate No. 43792 U 16
Shelf Life	15 months from date of production
Storage Conditions	Dry, +5°C to +25°C, original sealed packaging
Density	~1.35 kg/L (ISO 1138-1)

Technical Information – Joint Design

Joint Distance (m)	Min. Joint Width (mm)	Min. Joint Depth (mm)
2	10	10
4	15	10
6	20	10
8	30	15
10	35	17

Technical Information – Yield (Sealing)

Joint Width (mm)	Joint Depth (mm)	Yield per 300ml Cartridge (m)	Yield per 600ml Foil Pack (m)
10	10	3.0	6.0
15	12	1.6	3.2
20	17	0.9	1.8
25	20	0.6	1.2
30	25	0.4	0.8

Application

Application Information

Parameter	Value
Ambient Temperature	+5°C min / +40°C max
Substrate Temperature	+5°C min / +40°C max (min. 3°C above dew point)
Skinning Time	~70 minutes at +23°C / 50% R.H.
Curing Rate	~3.5 mm / 24 hours at +23°C / 50% R.H.

Application Steps

Substrate Preparation: Surface must be sound, clean, dry, and free from dirt, oil, grease, cement laitance, old sealants, and poorly bonded coatings. Use wire brushing, grinding, or sanding to remove weak material. Remove all dust before application.
Priming – Non-Porous Substrates: Aluminium, anodised aluminium, stainless steel, PVC, galvanised steel, powder-coated metals, glazed tiles: lightly abrade, then apply Sika® Cleaner P or Sika® Aktivator-205 with a clean cloth. Wait >15 min (<6 hours) before bonding. Other metals (copper, brass, titanium-zinc): apply Sika® Cleaner P or Aktivator-205, wait >15 min, then prime with Sika® Primer-3 N. Wait >30 min (<8 hours). PVC: apply Sika® Primer-215, wait >15 min (<8 hours).
Priming – Porous Substrates: Concrete, aerated concrete, cement renders, bricks: prime with Sika® Primer-3 N by brush. Wait >30 min (<8 hours) before bonding/sealing.
Application: Insert backing rod if required. Cut nozzle to desired bead size. Apply sealant into joint ensuring full contact with adhesion area. Tool immediately for smooth finish. Use Sika® Tooling Agent N if required.
Cleaning: Clean tools immediately with Sika® Remover-208. For skin cleaning use Sika® Cleaning Wipes-100. Cured material can only be removed mechanically.

Sika

Neutral Silicone Sealant 280ml Sika SikaSeal®-128

(0)

$2.80

SikaSeal®-128

A 1-component, non-corrosive neutral silicone sealant for indoor and outdoor use. Primerless adhesion to glass, metals, aluminium, wood, ceramic tiles, and painted surfaces. High elasticity with ±25% movement capability, low odour, and excellent UV and weathering resistance.

Overview

Specifications

Property	Basic Colours	Transparent	Standard
Chemical Base	Neutral silicone		–
Density	~1.45–1.55 kg/L	~0.95–1.05 kg/L	ISO 1183-1
Shore A Hardness	~30–50	~20–30	ISO 868
Tensile Strength	~1.0 MPa	~0.5 MPa	ISO 8339
Elastic Recovery	>80%		ISO 7389
Movement Capability	±25%	±20%	ASTM C719
Elongation at Break	≥250%	≥200%	ISO 37
Service Temperature	−40°C min / +150°C max		–
Skin Time	~15 minutes	~5 minutes	CQP 019-1 at +23°C/50% r.h.
Curing Rate	~3 mm / 24 hours		CQP 049-2 at +23°C/50% r.h.
Shelf Life	12 months from date of production		–
Storage	Dry, upside down, below +27°C, away from direct sunlight		–

Usage

Weatherproof joints between glass, metals, painted surfaces, aluminium, wood, and ceramic tiles
Window and door installation
Tile perimeter joints
General joint sealing – interior and exterior

Advantages

Good UV and weathering resistance
Primerless adhesion to a wide range of substrates
High elasticity and flexibility (±25% movement capability)
Low odour, neutral curing
Non-corrosive – safe for use with metals

Packaging

~280 ml (420 g) cartridge – basic colours (12 per box)
~280 ml (280 g) cartridge – transparent
~600 ml (900 g) sausage – basic colours (20 per box)
~600 ml (600 g) sausage – transparent (20 per box)

Colour

White, Transparent, Grey, Black (others on request)

Important – Do NOT Use On

Alkaline surfaces such as concrete, plaster, and masonry
Bituminous substrates, natural rubber, or EPDM rubber
Natural stone, marble, or granite (bleeding may occur)
Joints in and around swimming pools
Joints under water pressure or permanent water immersion
Totally confined spaces (requires atmospheric moisture to cure)
Structural glazing or insulated glazing / food contact applications

Product Details

Product Information

Property	Detail
Composition	Neutral silicone (1-component)
Shelf Life	12 months from date of production
Storage Conditions	Dry, upside down, below +27°C, protected from direct sunlight

Technical Information – Consumption Guide

Joint Width (mm)	Joint Depth (mm)	Joint Length per 300 ml
6	4	~12.5 m
9	5	~6.5 m
12	6	~4 m
20	10	~1.5 m

Joint Design

For joints ≥10 mm and ≤20 mm wide: recommended joint depth of 10 mm
For larger joints, contact Sika Technical Service Department

Application

Application Information

Parameter	Value
Ambient Temperature	+5°C min / +40°C max (min. 3°C above dew point)
Substrate Temperature	+5°C min / +40°C max (min. 3°C above dew point)
Skin Time (basic colours)	~15 minutes at +23°C / 50% r.h.
Skin Time (transparent)	~5 minutes at +23°C / 50% r.h.
Curing Rate	~3 mm / 24 hours at +23°C / 50% r.h.

Application Steps

Substrate Preparation: Surface must be sound, clean, dry, and free from dirt, oil, grease, old sealants, and poorly bonded coatings. Remove all dust and loose material. SikaSeal®-128 adheres without primers or activators on most substrates.
Priming – Non-Porous Substrates (for optimum adhesion): Aluminium, anodised aluminium, stainless steel, PVC, galvanised steel, powder-coated metals, glazed tiles: lightly abrade, clean, and pre-treat with Sika® Aktivator-205. Wait >15 min (<6 hours). Other metals (brass, titanium-zinc): apply Sika® Aktivator-205, wait >15 min, then prime with Sika® Primer-3 N. Wait >30 min (<8 hours). PVC: apply Sika® Primer-215, wait >30 min (<8 hours). Glass: clean with Isopropanol.
Priming – Porous Substrates: Prime with Sika® Primer-3 N by brush. Wait >30 min (<8 hours) before sealing.
Masking: Apply masking tape where neat joint lines are required. Remove within the skinning time after finishing.
Joint Backing: Insert a suitable backing rod to the required depth.
Application: SikaSeal®-128 is ready to use. Prepare the cartridge or foil pack, insert into the sealant gun, and fit the nozzle. Extrude into the joint ensuring full contact with joint sides. Avoid air entrapment.
Finishing: Immediately tool the sealant firmly against the joint sides for adequate adhesion and a smooth finish. Use a compatible tooling agent (water is suitable). Do not use solvent-based tooling products.
Cleaning: Clean tools immediately with Sika® Remover-208. Hardened material can only be removed mechanically. For skin cleaning, use Sika® Cleaning Wipes-100.

TOTAL

Peripheral Pump 370W TOTAL TWP13706

(0)

$32.24

Peripheral Pump 370W TOTAL TWP13706

The TOTAL TWP13706 is a 370W (0.5HP) peripheral pump with a 100% copper wire motor, brass impeller, stainless steel welded shaft (304+45#), and electrophoresis pump body. Delivers 35m max head, 35L/min max flow, and 8m max suction with a patented design for reliable performance.

Specifications

Brand	TOTAL
Model	TWP13706
Rated Power	370W (0.5HP)
Input Voltage	220–240V ~ 50Hz
Max. Head	35m
Max. Flow	35 L/min
Max. Suction	8m
Pipe Diameter	1" × 1"
Motor	100% copper wire
Impeller	Brass
Shaft	Stainless steel 304+45# welded
Pump Body	Electrophoresis coated

Product Features

100% copper wire motor for efficient, long-lasting operation
Patented design for reliable performance
Brass impeller for durability and smooth water flow
Stainless steel welded shaft (304+45#) for strength and corrosion resistance
Electrophoresis pump body for superior rust and corrosion protection
35m max head for pumping water to elevated tanks or upper floors
8m max suction depth for versatile installation

TOTAL

Peripheral Pump 550W TOTAL TWP15506

(0)

$50.96

Peripheral Pump 550W TOTAL TWP15506

The TOTAL TWP15506 is a 550W (0.75HP) peripheral pump with a 100% copper wire motor, brass impeller, and electrophoresis pump body. Delivers 45m max head and 45L/min max flow with 8m max suction. IPX4 rated with built-in thermal protector and patented design.

Specifications

Brand	TOTAL
Model	TWP15506
Rated Power	550W (0.75HP)
Input Voltage	220–240V ~ 50Hz
Max. Head	45m
Max. Flow	45 L/min
Max. Suction	8m
Pipe Diameter	1" × 1"
Motor	100% copper wire
Impeller	Brass
Pump Body	Electrophoresis coated
Protection Rating	IPX4

Product Features

100% copper wire motor for efficient, long-lasting operation
Patented design for reliable performance
Brass impeller for durability and smooth water flow
Electrophoresis pump body for superior rust and corrosion protection
Built-in thermal protector to prevent motor burnout from overheating
45m max head for pumping water to elevated tanks or upper floors
IPX4 splash-proof protection for safe outdoor installation

TOTAL

Peripheral Pump 750W TOTAL TWP17506

(0)

$55.12

Peripheral Pump 750W TOTAL TWP17506

The TOTAL TWP17506 is a 750W (1.0HP) peripheral pump with a 100% copper wire motor, brass impeller, stainless steel shaft, and electrophoresis pump body. Delivers 52m max head and 50L/min max flow with 8m max suction. IPX4 rated with built-in thermal protector and patented design.

Specifications

Brand	TOTAL
Model	TWP17506
Rated Power	750W (1.0HP)
Input Voltage	220–240V ~ 50Hz
Max. Head	52m
Max. Flow	50 L/min
Max. Suction	8m
Pipe Diameter	1" × 1"
Motor	100% copper wire
Impeller	Brass
Shaft	Stainless steel
Pump Body	Electrophoresis coated
Protection Rating	IPX4

Product Features

100% copper wire motor for efficient, long-lasting operation
Patented design for reliable performance
Brass impeller for durability and smooth water flow
Stainless steel shaft for corrosion resistance and strength
Electrophoresis pump body for superior rust and corrosion protection
Built-in thermal protector to prevent motor burnout from overheating
52m max head for pumping water to elevated tanks or upper floors
IPX4 splash-proof protection for safe outdoor installation

Sika

Polyurethane Elastic Joint Sealant 600ml Sika Sikaflex®-140 Construction

(0)

From $7.63

Sikaflex®-140 Construction

A 1-part polyurethane elastic joint sealant for durably sealing connection and movement joints in concrete and masonry facades. Bubble-free curing, ±25% movement capability, and excellent adhesion to most construction materials. LEED® v4 compliant.

Overview

Specifications

Property	Value
Type	1-component polyurethane elastic joint sealant
Density	(1.25 ± 0.1) kg/L (ISO 1183-1)
Shore A Hardness	35 (cured 28 days at +23°C / 50% R.H.)
Secant Tensile Modulus	0.30 N/mm² at 60% elongation (cured 28 days)
Elastic Recovery	70% at 100% elongation for 24 hours
Tear Propagation Resistance	6.0 N/mm (cured 7 days)
Elongation at Break	800% at −20°C (cured 7 days)
Movement Capability	±25% (ASTM C719)
Service Temperature	−40°C min / +70°C max
Skin Time	~120 minutes at +23°C / 50% R.H.
Tooling Time	~100 minutes at +23°C / 50% R.H.
Curing Rate	~2 mm / 24 hours at +23°C / 50% R.H.
Shelf Life	12 months from date of production
Storage	Dry, +5°C to +30°C, original sealed packaging

Usage

Interior and exterior joint sealing on building facades
Around window and door frames
Around precast and prefabricated elements
Floor and wall construction joints
General purpose construction sealant

Advantages

Easy to extrude and tool
Movement capability of ±25% (ASTM C719)
Good adhesion to many construction materials
Bubble-free curing
Can be overpainted with most conventional paint systems
LEED® v4 compliant – contributes to Indoor Environmental Quality (EQ) Credit: Low-Emitting Materials

Packaging

600 ml foil pack
Box of 20 foil packs

Colour

Grey
White

Product Details

Product Information

Property	Detail
Composition	Sika i-Cure® polyurethane (1-component)
Product Declaration	ASTM C920-18: Type S, Grade NS, Class 25, Use T1, NT, M
Shelf Life	12 months from date of production
Storage Conditions	Dry, +5°C to +30°C, original sealed packaging
Density	(1.25 ± 0.1) kg/L (ISO 1183-1)

Technical Information

Property	Value	Standard / Condition
Shore A Hardness	35	Cured 28 days, +23°C / 50% R.H.
Secant Tensile Modulus	0.30 N/mm²	60% elongation, cured 28 days
Elastic Recovery	70%	100% elongation for 24 hours
Tear Propagation Resistance	6.0 N/mm	Cured 7 days
Elongation at Break	800%	At −20°C, cured 7 days
Movement Capability	±25%	ASTM C719
Sag Flow	2 mm	20 mm profile at +50°C
Curing Rate	~2 mm / 24 hours	+23°C / 50% R.H.

Joint Design

Movement joints: min. 8 mm wide, max. 40 mm wide
Non-movement joints: can be less than 8 mm wide
Minimum depth: 8 mm, or width:depth ratio of 1:0.5 (facade) / 1:0.8 (floor), whichever is greater
Use closed-cell polyethylene foam backing rod

Application

Application Information

Parameter	Value
Ambient Temperature	+5°C min / +40°C max
Substrate Temperature	+5°C min / +40°C max (min. 3°C above dew point)
Product Temperature	+5°C min / +40°C max
Skin Time	~120 minutes at +23°C / 50% R.H.
Tooling Time	~100 minutes at +23°C / 50% R.H.
Curing Rate	~2 mm / 24 hours at +23°C / 50% R.H.

Application Steps

Substrate Preparation: Surface must be sound, clean, dry, and free from dirt, oil, grease, cement laitance, sealant residues, and poorly bonded coatings. Use wire brushing, grinding, or grit blasting to remove weak material. Repair damaged joint edges with suitable Sika repair products.
Priming – Non-Porous Substrates: Aluminium, stainless steel, galvanised steel, glazed tiles: lightly abrade, clean, then apply Sika® Aktivator-205 with a clean cloth. Other metals (copper, brass, titanium-zinc): abrade, clean, apply Sika® Aktivator-205, wait flash-off time, then prime with Sika® Primer-3 N. PVC: prime with Sika® Primer-215.
Priming – Porous Substrates: Concrete, aerated concrete, cement renders, bricks: prime with Sika® Primer-3 N or Sika® Primer-115. Concrete 2–3 days old or matt wet: use Sika® Primer-115.
Application: Apply masking tape if required. Insert backing rod to required depth. Prime joint surfaces. Open foil pack, fit nozzle, cut to desired bead size, and insert into application gun. Apply sealant into joint avoiding air entrapment. Tool firmly against joint sides immediately using Sika® Tooling Agent N. Remove masking tape within skin formation time.
Overpainting: Allow full cure before overpainting. Test paint compatibility per ISO/TR 20436:2017 before full application.
Do NOT use on: Natural stone (granite, marble, limestone), bitumen, natural rubber, EPDM rubber, or joints in swimming pools with chlorine treatment.

Sika

Polyurethane Expanding Foam 500ml Sika Boom® AP

(0)

$8.93

Sika Boom® AP

A 1-component, fast-curing polyurethane expanding foam for multi-position applications. Fixes, insulates, and fills connection joints around window and door frames, pipe entries, and vents in a single application. HFC-free and easy to apply with a nozzle in any position.

Overview

Specifications

Property	Value
Type	1-component polyurethane expanding foam
Density (cured)	~24 kg/m³
Compressive Strength	~0.04 N/mm² at 10% deformation (ISO 844)
Tensile Strength	~0.01 N/mm² (ISO 1926)
Shear Strength	~0.04 N/mm² (ISO 1922)
Thermal Conductivity	~0.030 W/mK (EN 12667)
Service Temperature	−40°C min / +90°C max
Dimensional Stability	±~5%
Tack Free Time	~10 minutes
Cutting Time	~30–60 minutes
Full Cure	24 hours
Shelf Life	12 months (opened cans: use within 4 weeks)
Storage	Upright, dry, +5°C to +25°C, away from direct sunlight

Usage

Fixing, insulating, and filling connection joints around window and door frames
Pipe entries, air conditioning vents, and roller blind housings
Insulation against noise, cold, and draughts in a single application

Advantages

1-component – ready to use
Multi-position foam – application in all positions including overhead
Easy application with nozzle
High expansion rate (~25L from 500ml can)
Fast curing – tack free in ~10 minutes
Very good thermal and sound insulation
Can be cut, sanded, and over-painted
HFC-free

Packaging

500 ml can (~25L yield)

Colour

Light Yellow (cured)

Product Details

Product Information

Property	Detail
Composition	Polyurethane (1-component)
Shelf Life	12 months from date of production; opened cans must be used within 4 weeks
Storage Conditions	Upright, dry, +5°C to +25°C, away from direct sunlight
Density (cured)	~24 kg/m³

Technical Information

Property	Value	Standard
Compressive Strength	~0.04 N/mm² (10% deformation)	ISO 844
Tensile Strength	~0.01 N/mm²	ISO 1926
Shear Strength	~0.04 N/mm²	ISO 1922
Dimensional Stability	±~5%	–
Thermal Conductivity	~0.030 W/mK	EN 12667
Water Vapour Permeability	μ = 21, sd = 1.0 m (d = 49 mm, p = 19.5 kg/m³)	ISO 12572
Service Temperature	−40°C min / +90°C max	–

Application

Application Information

Parameter	Optimum	Permissible Range
Ambient Temperature	+20°C	+5°C to +40°C
Substrate Temperature	+20°C	+5°C to +40°C
Tack Free Time	~10 minutes
Cutting Time	~30–60 minutes
Full Cure	24 hours

Consumption

500 ml can → ~25 L expanded foam
750 ml can → ~38 L expanded foam
850 ml can → ~45 L expanded foam
Consumption can be regulated by adjusting pressure on the valve

Application Steps

Substrate Preparation: Surface must be clean, sound, and free from oils, grease, dust, and loose particles. Remove paint, cement laitance, and poorly adhering contaminants. No primer or activator required. Pre-dampen the substrate with a mist spray of clean water to ensure proper curing and prevent secondary foam expansion.
Application: Shake can well before use. Attach nozzle and apply foam into the joint or gap, filling to approximately 50% of the void depth as the foam will expand. Apply in all positions including overhead. Adjust pressure on the valve to control output.
Cutting & Finishing: Allow ~30–60 minutes before cutting. Once cured, the foam can be cut, sanded, and over-painted.
Cleaning: Clean tools immediately with Sika Boom® Cleaner and/or Sika® Remover-208. Cured residual material can only be removed mechanically.

Sika

PVC Waterstop O-Profile 20m Roll Sika Waterbar® O VN

(0)

From $128.00

Sika Waterbar® O VN

A flexible thermoplastic PVC waterstop designed to stop water migration through construction and expansion joints in concrete structures. The multi-rib profile creates impenetrable barriers and sealing begins as soon as the concrete hardens. Available in 4 widths to suit all application types. Can be easily site-welded.

Overview

Specifications

Property	Value	Standard
Material	Flexible thermoplastic PVC	–
Colour	Yellow	–
Shore A Hardness	>70	ASTM D2240
Tensile Strength	12 N/mm² (±5%)	ASTM D412-06
Elongation	300% (±5%)	ASTM D412-06
Service Temperature	−35°C to +55°C	–
Chemical Resistance (permanent)	Seawater, sewage	–
Chemical Resistance (temporary)	Diluted inorganic alkalis, mineral acids, mineral oils and fuels	–
Shelf Life	5 years from date of production	–
Storage	Dry, shaded place, protected from sunlight	–

System Sizes

Type	Width (mm) ±5mm	Roll Length (m)	Nominal Thickness (mm) ±10%
O-15	150	20	3.0–4.5
O-20	200	20	3.0–4.5
O-25	250	20	3.0–4.5
O-32	320	15	3.0–8.0

Usage

Basements and below-ground structures
Water reservoirs and swimming pools
Sewage treatment plants
Retaining walls and lift shafts
Tunnels, culverts, and service pits

Advantages

Sealing starts as soon as concrete has hardened
Multi-rib profile provides impenetrable barriers to water migration
Can be easily site-welded (welding knife available)
Good chemical resistance to seawater, sewage, and diluted acids/alkalis
Available in various profiles and sizes for all application types

Packaging

O-15, O-20, O-25: 20 m rolls
O-32: 15 m rolls

Colour

Yellow flexible strip

Product Details

Product Information

Property	Detail
Material	Flexible thermoplastic PVC
Shelf Life	5 years from date of production
Storage Conditions	Dry, shaded place, protected from direct sunlight

Application

Application Steps

Positioning: Position the Sika Waterbar® O VN centrally within the construction or expansion joint, ensuring the centre bulb or ribs are correctly aligned with the joint plane.
Fixing: Secure the waterstop in position using wire ties or clips to the reinforcement to prevent displacement during concrete pouring.
Concrete Placement: Pour and compact concrete carefully on both sides of the waterstop. Ensure full encapsulation without voids or honeycombing around the waterstop profile.
Site Welding: Where joints or connections are required, weld sections together using a welding knife. Ensure clean, even welds for a watertight connection.
Inspection: After concrete has hardened, inspect the joint area to confirm the waterstop is correctly embedded and no voids are present.

Sika

PVC Waterstop V-Profile 20m Roll Sika Waterbar® V VN

(0)

From $106.20

Sika Waterbar® V VN

A flexible thermoplastic PVC waterstop designed to stop water migration through construction joints in concrete structures. The multi-rib V-profile is cast centrally into stop-ends and sealing begins as soon as the concrete hardens. Pre-punched eyelets allow easy fixing to reinforcement. Can be site-welded using a Sika electric welding knife.

Overview

Specifications

Property	Value	Standard
Material	Flexible thermoplastic PVC (Polyvinyl Chloride)	–
Colour	Yellow	–
Shore A Hardness	>70	ASTM D2240
Tensile Strength	12 N/mm (±5%)	ASTM D412-06
Elongation	300% (±5%)	ASTM D412-06
Service Temperature	−35°C to +55°C	–
Chemical Resistance (permanent)	Seawater, sewage	–
Chemical Resistance (temporary)	Diluted inorganic alkalis, mineral acids, mineral oils and fuels	–
Shelf Life	5 years from date of production	–
Storage	Dry, shaded place, protected from direct sunlight	–

System Sizes

Type	Width (mm) ±5mm	Roll Length (m)	Nominal Thickness (mm) ±10%
V-15	150	20	3.0–5.0
V-20	200	20	3.0–5.0
V-25	250	20	3.0–5.0
V-32	320	15	3.0–8.0

Usage

Water reservoirs and swimming pools
Sewage treatment plants
Basements and below-ground structures
Retaining walls and lift shafts
Tunnels, culverts, and service pits
Construction joints and movement joints with nominal movement (e.g. basement or retaining walls)

Advantages

Sealing starts as soon as concrete has hardened
Multi-rib V-profile provides impenetrable barriers to water migration
Can be easily site-welded using Sika electric welding knife
Pre-punched eyelets for easy fixing to reinforcement with tie wires
Good chemical resistance to seawater, sewage, and diluted acids/alkalis
Available in 4 sizes for all application types

Packaging

V-15, V-20, V-25: 20 m rolls
V-32: 15 m rolls

Colour

Yellow flexible strip

Product Details

Product Information

Property	Detail
Composition	Polyvinyl Chloride (PVC)
Shelf Life	5 years from date of production
Storage Conditions	Dry, shaded place, protected from direct sunlight

Application

Application Steps

Fixing to Formwork: Fit the V-profile Sika Waterbar® V VN into the split formwork or shuttering for casting centrally into the stop-ends. Used for construction and movement joints where nominal movement is anticipated.
Fixing to Reinforcement: Use pre-punched eyelets in the outer flanges to fix the waterbar to steel reinforcement with tie wires, ensuring it is not displaced during concreting.
Placing Concrete – First Stage: Both sides must be well embedded in concrete. Vibrate carefully to avoid honeycombing. Use well-graded aggregate with concrete that is neither too plastic nor too stiff. Apply equal concrete pressure on both sides to prevent the ends from folding up.
Placing Concrete – Second Stage: Remove formwork carefully near the waterbar. Check the stop-end thoroughly for honeycombing and repair if necessary. Clean all hardened concrete remnants from the first stage before proceeding as per the first stage.
Site Welding: Use a Sika electric welding knife. Heat both ends simultaneously on the faces of the welding knife until an even molten bead of PVC appears. Withdraw the knife and immediately push the sections together. Hold rigid until the PVC cools and solidifies. Check for gaps or imperfect joints and re-weld if necessary.

TOTAL

Reversible Plate Compactor 6.5HP TOTAL TP7125-4

(0)

$1,133.60

Reversible Plate Compactor 6.5HP TOTAL TP7125-4

The TOTAL TP7125-4 is a heavy-duty reversible plate compactor with a 6.5HP (4.8kW) gasoline engine and 126kg operating weight. Forward and backward movement makes it ideal for compacting soil, gravel, and asphalt in confined and tight spaces.

Specifications

Brand	TOTAL
Model	TP7125-4
Engine Power	4.8kW (6.5HP)
Operating Weight	126 kg
Movement	Forward & Backward (Reversible)

Product Features

Reversible forward and backward movement for compaction in confined and tight spaces
6.5HP (4.8kW) powerful gasoline engine for heavy-duty compaction tasks
126kg operating weight for effective compaction of soil, gravel, and asphalt
Heavy-duty steel plate for durability and consistent compaction performance
Anti-vibration handle for reduced operator fatigue during prolonged use

TOTAL

Rotary Hammer 1050W TOTAL TH110266

(0)

$61.36

Rotary Hammer 1050W

Heavy-duty 1050W SDS+ rotary hammer with 4.5J impact energy for demanding drilling and chiselling in concrete, masonry, steel, and wood. Includes 3 hammer drill bits, 2 chisel bits, oil grease, dust cap, pin wrench, and carry case. 220–240V / 50–60Hz.

Specifications

Attribute	Detail
Model No.	TH110266
Input Power	1050W
Voltage	220–240V ~ 50/60Hz
No-Load Speed	1,100 rpm
Impact Rate	3,800 impacts/min
Impact Energy	4.5J
Chuck System	SDS+
Max. Drilling — Concrete	ø26mm
Max. Drilling — Steel	ø13mm
Max. Drilling — Wood	ø40mm
Dimensions	410 × 320 × 120mm
Weight	6.4kg

What's in the Box

1× Rotary Hammer 1050W (TH110266)
3× SDS+ hammer drill bits (free)
2× Chisel bits (free)
1× Oil grease (40g)
1× Dust cap
1× Pin wrench
1× Auxiliary side handle
1× Carry case

Safety & Care

Always disconnect from power before changing bits or accessories
Wear appropriate PPE (safety goggles, gloves, ear protection, dust mask) during use
Apply oil grease to SDS+ shank before inserting bits to reduce wear
Use auxiliary handle for better control during hammer drilling and chiselling
Keep ventilation slots clean and free from dust buildup
Store in the carry case in a dry place away from moisture and direct sunlight

TOTAL

Rotary Hammer 1500W

(0)

$71.76

Rotary Hammer 1500W

Industrial-grade 1500W SDS+ rotary hammer with 5.5J impact energy for heavy-duty drilling and chiselling in concrete up to ø32mm. 3-mode operation (drill / hammer drill / chisel). Includes 3 drill bits, 2 chisel bits, oil grease, extra carbon brushes, auxiliary side handle, pin wrench, and carry case. 220–240V / 50–60Hz.

Specifications

Attribute	Detail
Model No.	TH1153216
Grade	Industrial
Input Power	1500W
Voltage	220–240V ~ 50/60Hz
No-Load Speed	850 rpm
Impact Rate	4,400 impacts/min
Impact Energy	5.5J
Chuck System	SDS+
Max. Drilling — Concrete	ø32mm
Operating Modes	3 (drill / hammer drill / chisel)

What's in the Box

1× Rotary Hammer 1500W (TH1153216)
3× SDS+ drill bits
2× Chisel bits
1× Oil grease (40g)
1× Set extra carbon brushes
1× Auxiliary side handle
1× Pin wrench
1× Carry case

Safety & Care

Always disconnect from power before changing bits or accessories
Wear appropriate PPE (safety goggles, gloves, ear protection, dust mask) during use
Apply oil grease to SDS+ shank before inserting bits to reduce wear
Replace carbon brushes when worn to maintain motor performance
Use auxiliary handle for better control during hammer drilling and chiselling
Keep ventilation slots clean and free from dust buildup
Store in the carry case in a dry place away from moisture and direct sunlight

Jadever

Rotary Hammer 1500W 32mm JADEVER JDRH2D32

(0)

$60.25

Rotary Hammer 1500W 32mm

1500W heavy-duty corded rotary hammer with 32mm SDS-Plus chuck, 3 functions, 950rpm no-load speed, and 4,500bpm impact rate. Designed for demanding concrete drilling, chiseling, and demolition work on construction sites. Includes heavy-duty auxiliary side handle for maximum control. Model: Jadever JDRH2D32.

Specifications

Specification	Details
Model No.	JDRH2D32
Input Voltage	220–240V ~ 50/60Hz
Input Power	1500W
Max. Drilling Capacity	32mm
No-Load Speed	950 rpm
Impact Rate	4,500 bpm
Functions	3 (Drill / Hammer Drill / Chisel)
Chuck	SDS-Plus

Features

1500W powerful motor for heavy-duty drilling and chiseling in reinforced concrete and hard masonry
32mm SDS-Plus chuck for fast, tool-free bit changes with large-diameter bits
3 functions: drill, hammer drill, and chisel for versatile construction applications
4,500bpm high impact rate for fast and efficient concrete penetration
Heavy-duty auxiliary side handle for maximum grip and two-handed control
Variable speed trigger for precise speed control
Anti-vibration design for reduced operator fatigue during prolonged use

Package Contents

1 pc Rotary hammer (1500W)
1 pc Heavy-duty auxiliary side handle

TOTAL

Rotary Hammer 650W TOTAL TH306236

(0)

$44.72

Rotary Hammer 650W

650W SDS+ rotary hammer with 1.7J impact energy and 3-mode operation (drill / hammer drill / chisel) for drilling into concrete, masonry, steel, and wood. Includes 3 free SDS+ drill bits, depth gauge, auxiliary side handle, extra carbon brushes, and a carry case. 220–240V / 50–60Hz.

Specifications

Attribute	Detail
Model No.	TH306236
Input Power	650W
Voltage	220–240V ~ 50/60Hz
No-Load Speed	0–1,700 rpm (variable)
Impact Rate	0–5,500 impacts/min
Impact Energy	1.7J
Chuck System	SDS+ (Slotted Drive System Plus)
Max. Drilling — Concrete	ø22mm
Max. Drilling — Steel	ø10mm
Max. Drilling — Wood	ø25mm
Operating Modes	3 (drill / hammer drill / chisel)
Dimensions	380 × 290 × 160mm
Weight	4.6kg

What's in the Box

1× Rotary Hammer 650W (TH306236)
3× SDS+ drill bits (free)
1× Depth gauge
1× Auxiliary side handle
1× Set extra carbon brushes
1× Carry case

Safety & Care

Always disconnect from power before changing bits or accessories
Wear appropriate PPE (safety goggles, gloves, ear protection, dust mask) during use
Use auxiliary handle for better control during hammer drilling and chiselling
Replace carbon brushes when worn to maintain motor performance
Keep ventilation slots clean and free from dust buildup
Store in the carry case in a dry place away from moisture and direct sunlight

Jadever

Rotary Hammer 800W 26mm SDS-Plus JADEVER JDRH1D26

(0)

$50.58

Rotary Hammer 800W 26mm

800W corded rotary hammer with 26mm SDS-Plus chuck, 3 functions, 0–1,100rpm no-load speed, and 0–4,000bpm impact rate. Features auxiliary side handle for improved control and includes Jadever carry case. Suitable for drilling and chiseling in concrete, masonry, and brick. Model: Jadever JDRH1D26.

Specifications

Specification	Details
Model No.	JDRH1D26
Input Voltage	220–240V ~ 50/60Hz
Input Power	800W
Max. Drilling Capacity	26mm
No-Load Speed	0–1,100 rpm
Impact Rate	0–4,000 bpm
Functions	3 (Drill / Hammer Drill / Chisel)
Chuck	SDS-Plus

Features

800W powerful motor for sustained drilling and chiseling in concrete, masonry, and brick
26mm SDS-Plus chuck for fast, tool-free bit changes
3 functions: drill, hammer drill, and chisel for versatile applications
0–4,000bpm impact rate for effective concrete drilling and chiseling
Auxiliary side handle for improved grip and two-handed control
Variable speed trigger for precise speed control
Jadever carry case for safe storage and transport

Package Contents

1 pc Rotary hammer (800W)
1 pc Auxiliary side handle
1 pc Jadever carry case

Jadever

Rotary Hammer 800W 26mm SDS-Plus JADEVER JDRH1D26-2

(0)

$51.00

Rotary Hammer 800W 26mm with Keyless Chuck

800W corded rotary hammer with 26mm SDS-Plus chuck, 3 functions, 0–1,100rpm no-load speed, and 0–4,000bpm impact rate. Includes a keyless quick-change chuck adapter for tool-free bit changes between SDS-Plus and standard round shank bits. Also includes auxiliary side handle and Jadever carry case. Model: Jadever JDRH1D26-2.

Specifications

Specification	Details
Model No.	JDRH1D26-2
Input Voltage	220–240V ~ 50/60Hz
Input Power	800W
Max. Drilling Capacity	26mm
No-Load Speed	0–1,100 rpm
Impact Rate	0–4,000 bpm
Functions	3 (Drill / Hammer Drill / Chisel)
Chuck	SDS-Plus + Keyless chuck adapter

Features

800W powerful motor for sustained drilling and chiseling in concrete, masonry, and brick
26mm SDS-Plus chuck for fast, tool-free bit changes
Keyless quick-change chuck adapter for switching between SDS-Plus and standard round shank bits without tools
3 functions: drill, hammer drill, and chisel for versatile applications
0–4,000bpm impact rate for effective concrete drilling and chiseling
Auxiliary side handle for improved grip and two-handed control
Variable speed trigger for precise speed control
Jadever carry case for safe storage and transport

Package Contents

1 pc Rotary hammer (800W)
1 pc Keyless quick-change chuck adapter
1 pc Auxiliary side handle
1 pc Jadever carry case

TOTAL

Rotary Hammer 800W TOTAL TH308268

(0)

$58.24

Rotary Hammer 800W

800W SDS+ rotary hammer with 2.5J impact energy and 3-mode operation (drill / hammer drill / chisel) for heavy-duty drilling into concrete, masonry, steel, and wood. Includes auxiliary side handle and carry case. 220–240V / 50–60Hz.

Specifications

Attribute	Detail
Model No.	TH308268
Input Power	800W
Voltage	220–240V ~ 50/60Hz
No-Load Speed	0–1,250 rpm (variable)
Impact Rate	0–5,300 impacts/min
Impact Energy	2.5J
Chuck System	SDS+ (Slotted Drive System Plus)
Max. Drilling — Concrete	ø26mm
Max. Drilling — Steel	ø13mm
Max. Drilling — Wood	ø30mm
Operating Modes	3 (drill / hammer drill / chisel)
Weight	3.85kg

What's in the Box

1× Rotary Hammer 800W (TH308268)
1× Auxiliary side handle
1× Carry case

Safety & Care

Always disconnect from power before changing bits or accessories
Wear appropriate PPE (safety goggles, gloves, ear protection, dust mask) during use
Use auxiliary handle for better control during hammer drilling and chiselling
Keep ventilation slots clean and free from dust buildup
Store in the carry case in a dry place away from moisture and direct sunlight

TOTAL

Rotary Hammer 800W TOTAL TH308268-2

(0)

$61.88

Rotary Hammer 800W

800W SDS+ rotary hammer with 2.5J impact energy and 3-mode operation (drill / hammer drill / chisel). Includes a keyless quick-change chuck adapter for use with standard round-shank bits, plus a full accessory kit. 220–240V / 50–60Hz.

Specifications

Attribute	Detail
Model No.	TH308268-2
Input Power	800W
Voltage	220–240V ~ 50/60Hz
No-Load Speed	0–1,100 rpm (variable)
Impact Rate	0–4,000 impacts/min
Impact Energy	2.5J
Chuck System	SDS+ with keyless quick-change chuck adapter
Max. Drilling — Concrete	ø26mm
Max. Drilling — Steel	ø13mm
Max. Drilling — Wood	ø30mm
Operating Modes	3 (drill / hammer drill / chisel)
Dimensions	460 × 320 × 150mm
Weight	5.9kg

What's in the Box

1× Rotary Hammer 800W (TH308268-2)
1× Keyless quick-change chuck adapter
3× SDS+ drill bits (free)
2× Chisels (free)
1× Depth gauge
1× Auxiliary side handle
1× Set extra carbon brushes
1× Carry case

Safety & Care

Always disconnect from power before changing bits or accessories
Wear appropriate PPE (safety goggles, gloves, ear protection, dust mask) during use
Use auxiliary handle for better control during hammer drilling and chiselling
Replace carbon brushes when worn to maintain motor performance
Keep ventilation slots clean and free from dust buildup
Store in the carry case in a dry place away from moisture and direct sunlight

TOTAL

Rotary Hammer 950W TOTAL TH309288

(0)

$61.88

Rotary Hammer 950W

Industrial-grade 950W SDS+ rotary hammer with 2.5J impact energy and 3-mode operation (drill / hammer drill / chisel) for heavy-duty drilling into concrete, masonry, steel, and wood. Includes 3 drill bits, 2 chisel bits, auxiliary side handle, depth gauge, extra carbon brushes, and carry case. 220–240V / 50–60Hz.

Specifications

Attribute	Detail
Model No.	TH309288
Grade	Industrial
Input Power	950W
Voltage	220–240V ~ 50/60Hz
No-Load Speed	0–1,050 rpm (variable)
Impact Rate	0–4,670 impacts/min
Impact Energy	2.5J
Chuck System	SDS+ (Slotted Drive System Plus)
Max. Drilling — Concrete	ø28mm
Max. Drilling — Steel	ø13mm
Max. Drilling — Wood	ø30mm
Operating Modes	3 (drill / hammer drill / chisel)

What's in the Box

1× Rotary Hammer 950W (TH309288)
3× SDS+ drill bits
2× Chisel bits
1× Auxiliary side handle
1× Depth gauge
1× Set extra carbon brushes
1× Carry case

Safety & Care

Always disconnect from power before changing bits or accessories
Wear appropriate PPE (safety goggles, gloves, ear protection, dust mask) during use
Use auxiliary handle for better control during hammer drilling and chiselling
Replace carbon brushes when worn to maintain motor performance
Keep ventilation slots clean and free from dust buildup
Store in the carry case in a dry place away from moisture and direct sunlight

TOTAL

Rotary Hammer 950W TOTAL TH309288-2

(0)

$67.60

Rotary Hammer 950W

Industrial-grade 950W SDS+ rotary hammer with 2.5J impact energy and 3-mode operation (drill / hammer drill / chisel). Includes a keyless quick-change chuck adapter for use with standard round-shank bits, plus a full accessory kit. 220–240V / 50–60Hz.

Specifications

Attribute	Detail
Model No.	TH309288-2
Grade	Industrial
Input Power	950W
Voltage	220–240V ~ 50/60Hz
No-Load Speed	0–1,050 rpm (variable)
Impact Rate	0–4,670 impacts/min
Impact Energy	2.5J
Chuck System	SDS+ with keyless quick-change chuck adapter
Max. Drilling — Concrete	ø28mm
Max. Drilling — Steel	ø13mm
Max. Drilling — Wood	ø30mm
Operating Modes	3 (drill / hammer drill / chisel)

What's in the Box

1× Rotary Hammer 950W (TH309288-2)
1× Keyless quick-change chuck adapter
3× SDS+ drill bits
2× Chisel bits
1× Auxiliary side handle
1× Depth gauge
1× Set extra carbon brushes
1× Carry case

Safety & Care

Always disconnect from power before changing bits or accessories
Wear appropriate PPE (safety goggles, gloves, ear protection, dust mask) during use
Use auxiliary handle for better control during hammer drilling and chiselling
Replace carbon brushes when worn to maintain motor performance
Keep ventilation slots clean and free from dust buildup
Store in the carry case in a dry place away from moisture and direct sunlight

All Categories

Product Comparison