Handle a full range of fastener sizes with the THT102386 8-Piece Double Open End Spanner Set. Each spanner features two open ends of different sizes, giving you 16 size options across 8 spanners — from 6mm to 22mm. Fine polished finish and plastic hanger packaging make this set a practical addition to any toolbox.

Specifications

• Model: THT102386
• Set Contents: 8 pcs
• Sizes: 6×7mm, 8×9mm, 10×11mm, 12×13mm, 14×15mm, 16×17mm, 18×19mm, 20×22mm
• Size Range: 6–22mm
• Finish: Fine polished
• Packaging: Plastic hanger

Product Details

• 8-piece double open end set – 16 size options across 8 spanners, covering 6mm to 22mm
• Double open end design – two different sizes per spanner for maximum versatility and faster access to fasteners
• Fine polished finish – smooth surface for corrosion resistance and a professional look
• Plastic hanger packaging – easy to store and display
• Suitable for automotive repair, machinery maintenance, plumbing, and general fastening tasks

Materials & Care

• Clean after each use to remove grease and debris
• Apply a light coat of oil to prevent rust during storage
• Store on the plastic hanger or in a dry toolbox to protect the finish
• Always use the correct size spanner for the fastener to avoid rounding
• Do not use with extension bars or hammers

Cover the most common fastener sizes with the THT102286 8-Piece Combination Spanner Set. Spanning 6mm to 19mm, this fine-polished set gives you open-end and ring-end versatility across 8 sizes — everything you need for automotive, mechanical, and general workshop tasks in one convenient pack.

Specifications

• Model: THT102286
• Set Contents: 8 pcs
• Sizes: 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 17mm, 19mm
• Finish: Fine polished
• Packaging: Plastic hanger

Product Details

• 8-piece set – covers 6mm to 19mm, the most commonly used fastener sizes in automotive and workshop applications
• Combination design – open end for speed, ring end for torque in confined spaces
• Fine polished finish – smooth surface for corrosion resistance and a professional look
• Plastic hanger packaging – easy to store and display
• Suitable for automotive repair, machinery maintenance, plumbing, and general fastening tasks

Materials & Care

• Clean after each use to remove grease and debris
• Apply a light coat of oil to prevent rust during storage
• Store on the plastic hanger or in a dry toolbox to protect the finish
• Always use the correct size spanner for the fastener to avoid rounding
• Do not use with extension bars or hammers

Carry a capable saw anywhere with the THFSW1808 Folding Saw. The 180mm (7") SK5 blade with extra sharp 7 TPI triple-ground teeth folds safely into the handle for pocket-friendly storage, while the hand protection guard keeps your fingers safe during use. Fast cutting, long blade life, and a compact folding design make this the go-to saw for pruning, camping, and on-site work.

Specifications

• Model: THFSW1808
• Blade Material: SK5 steel
• Blade Length: 180mm (7")
• Teeth: 7 TPI, extra sharp, triple-ground
• Design: Folding with hand protection guard

Product Details

• SK5 steel blade – high-carbon steel for superior hardness, edge retention, and long blade life
• Extra sharp 7 TPI triple-ground teeth – cuts on both push and pull strokes for fast, efficient cutting
• Hand protection guard – shields fingers from the blade during cutting for safer operation
• Folding design – blade folds into the handle for safe, compact storage and transport
• 180mm (7") blade – compact yet capable for pruning branches, camping, and on-site tasks

Materials & Care

• Clean the blade after each use to remove sap and debris
• Apply a light coat of oil to the blade to prevent rust
• Always fold the blade before storing or carrying
• Check the locking mechanism before each use to ensure the blade is secure
• Always use appropriate PPE (gloves) when sawing

Step up your cutting performance with the THT55208 Industrial Hand Saw. Made from SK5 steel with extra sharp, heat-treated teeth and a black anti-rust coating, this 500mm (20") saw cuts through PVC and wood with exceptional speed and durability. The black coating reduces friction and prevents rust for long-lasting performance. Comes with a teeth protector for safe storage and transport.

Specifications

• Model: THT55208
• Blade Material: SK5 steel
• Size: 20" (500mm)
• Teeth: 9 TPI, extra sharp, heat treated
• Blade Coating: Black anti-rust coating
• Application: PVC and wood
• Includes: Teeth protector

Product Details

• SK5 steel blade – high-carbon steel for superior hardness, edge retention, and cutting performance
• Extra sharp 9 TPI teeth – medium-fine tooth pitch for clean, fast cuts through PVC and wood
• Heat-treated blade – enhanced hardness and edge retention for long service life under heavy use
• Black anti-rust coating – prevents corrosion, reduces blade friction, and extends blade life
• Industrial grade – built for regular, demanding use on the job site or in the workshop
• Teeth protector included – keeps teeth sharp and safe during storage and transport

Materials & Care

• Clean the blade after each use to remove sap, sawdust, and PVC residue
• Store with the teeth protector fitted to maintain sharpness and prevent injury
• The black coating provides rust resistance – wipe dry after use in wet conditions
• Do not use on metal or masonry
• Always use appropriate PPE (gloves, eye protection) when sawing

Cut through timber, boards, and construction materials with confidence using the THT55206 20" Hand Saw. Made from 65 Manganese spring steel with a 0.9mm blade thickness and 7 TPI tooth pitch, this saw delivers fast, aggressive cuts through wood — ideal for framing, carpentry, and general construction work. The extra 2" over the 18" model gives added reach and a longer cutting stroke for bigger jobs.

Specifications

• Model: THT55206
• Blade Material: 65 Manganese (Mn) spring steel
• Size: 20" (500mm)
• Teeth: 7 TPI
• Blade Thickness: 0.9mm

Product Details

• 65 Manganese spring steel blade – high-carbon manganese steel for excellent toughness, flexibility, and edge retention
• 7 TPI – coarse tooth pitch for fast, aggressive cutting through softwood and hardwood
• 0.9mm blade thickness – thin kerf for reduced material waste and less cutting effort
• 20" (500mm) length – longer stroke for faster cutting on larger timber and boards

Materials & Care

• Clean the blade after each use to remove sap and sawdust
• Apply a light coat of oil to the blade to prevent rust
• Store in a dry place – hang vertically or lay flat to avoid blade warping
• Do not use on metal or masonry – for wood cutting only
• Always use appropriate PPE (gloves, eye protection) when sawing

Cut through timber, boards, and construction materials with confidence using the THT55450 18" Hand Saw. Made from 65 Manganese spring steel with a 0.9mm blade thickness and 7 TPI tooth pitch, this saw delivers fast, aggressive cuts through wood — ideal for framing, carpentry, and general construction work.

Specifications

• Model: THT55450
• Blade Material: 65 Manganese (Mn) spring steel
• Size: 18" (450mm)
• Teeth: 7 TPI
• Blade Thickness: 0.9mm

Product Details

• 65 Manganese spring steel blade – high-carbon manganese steel for excellent toughness, flexibility, and edge retention
• 7 TPI – coarse tooth pitch for fast, aggressive cutting through softwood and hardwood
• 0.9mm blade thickness – thin kerf for reduced material waste and less cutting effort
• 18" (450mm) length – versatile size for framing, carpentry, and general construction tasks

Materials & Care

• Clean the blade after each use to remove sap and sawdust
• Apply a light coat of oil to the blade to prevent rust
• Store in a dry place – hang vertically or lay flat to avoid blade warping
• Do not use on metal or masonry – for wood cutting only
• Always use appropriate PPE (gloves, eye protection) when sawing

Cut through metal, plastic, and wood with precision using the THT54166 12" Hacksaw Frame. This frame comes complete with a THT572248 bi-metal blade (24 TPI, M2+D6A steel) — ready to work straight out of the box. The 300mm frame size is the industry standard, accepting all common 12" replacement blades.

Specifications

• Model: THT54166
• Size: 300mm (12")
• Range of Application: Metal, plastic, wood
• Included Blade: THT572248 Bi-metal, 24 TPI, M2+D6A steel

Product Details

• Includes bi-metal blade – THT572248, 24 TPI, M2+D6A steel for cutting metal, plastic, and wood
• 24 TPI blade – fine tooth pitch for smooth, precise cuts on metal and thin-walled materials
• M2+D6A bi-metal construction – high-speed steel teeth on a flexible alloy steel back for durability and break resistance
• 300mm (12") standard size – accepts all common 12" replacement hacksaw blades
• Suitable for cutting metal, plastic, and wood

Materials & Care

• Ensure the blade is properly tensioned before each use for straight, accurate cuts
• Replace the blade when teeth become dull – use standard 12" hacksaw blades
• Clean the frame after use to remove metal filings and debris
• Store in a dry place away from moisture
• Always use appropriate PPE (gloves, eye protection) when cutting metal

Cut through logs, branches, and timber with ease using the THT59241 24" Bow Saw. At 610mm, this classic bow saw provides the reach and blade length needed for fast, efficient cutting of green wood, dry timber, and thick branches in the garden, campsite, or workshop.

Specifications

• Model: THT59241
• Size: 24" (610mm)

Product Details

• 24" (610mm) blade – long cutting stroke for fast, efficient sawing through thick branches and logs
• Lightweight tubular frame – keeps the blade under tension for straight, controlled cuts
• Suitable for green wood, dry timber, and thick branch pruning in garden and outdoor applications
• Replaceable blade – extend the life of the saw by fitting a new blade when teeth become dull

Materials & Care

• Clean the blade after each use to remove sap and debris
• Apply a light coat of oil to the blade to prevent rust
• Check blade tension before each use – a properly tensioned blade cuts straighter and faster
• Replace the blade when teeth become dull for best cutting performance
• Store in a dry place away from moisture
• Always use appropriate PPE (gloves, eye protection) when sawing

Cut through branches cleanly and efficiently with the THPS3308 Pruning Saw. Featuring precision triple-ground teeth for smooth, fast cuts, this saw can be paired with an extension bar for reaching high branches without a ladder. Comes with a free PP shell for safe blade storage and transport.

Specifications

• Model: THPS3308
• Teeth: Precision triple-ground
• Extension Bar: Compatible (sold separately)
• Includes: 1 pc PP shell (blade protection)

Product Details

• Precision triple-ground teeth – cuts on both push and pull strokes for faster, smoother results with less effort
• Extension bar compatible – attach an extension bar to reach high branches without climbing a ladder
• Free PP shell included – protective polypropylene sheath keeps the blade safe during storage and transport
• Suitable for pruning branches in gardens, orchards, and landscaping applications

Materials & Care

• Clean the blade after each use to remove sap and debris
• Apply a light coat of oil to the blade to prevent rust
• Store with the PP shell fitted to protect the teeth and prevent injury
• Replace the blade when teeth become dull for best cutting performance
• Always use appropriate PPE (gloves, eye protection) when sawing overhead

Tackle demanding riveting jobs with the THT32105 Industrial Hand Riveter. With a lightweight aluminium body, 10.5" length, and compatibility with four rivet sizes — 2.4mm, 3.2mm, 4mm, and 4.8mm — this industrial-grade riveter delivers consistent, fully-set rivets for automotive, HVAC, and sheet metal fabrication applications.

Specifications

• Model: THT32105
• Body Material: Aluminium
• Length: 10.5"
• Compatible Rivet Diameters: 2.4mm, 3.2mm, 4mm, 4.8mm

Product Details

• Industrial grade – built for regular, heavy-duty riveting tasks on the job site or in the workshop
• Aluminium body – lightweight yet strong, reducing hand fatigue during extended riveting sessions
• 4 rivet sizes supported – 2.4mm, 3.2mm, 4mm, and 4.8mm covering the most common blind rivet diameters
• 10.5" length – good leverage for consistent, fully-set rivets with minimal effort
• Suitable for automotive bodywork, HVAC, sheet metal fabrication, and general assembly

Materials & Care

• Clear spent mandrels from the collection chamber regularly to maintain smooth operation
• Apply a light coat of oil to the moving parts periodically
• Ensure the correct nosepiece is fitted for the rivet diameter being used
• Store in a dry place away from moisture
• Always use appropriate PPE (eye protection) when riveting

Join sheet metal, plastic, and other materials quickly and securely with the THT32108S Hand Riveter. With a lightweight aluminium body, 10.5" length, and compatibility with four rivet sizes — 2.4mm, 3.2mm, 4mm, and 4.8mm — this riveter handles the most common blind rivet sizes used in automotive, HVAC, and general fabrication work.

Specifications

• Model: THT32108S
• Body Material: Aluminium
• Length: 10.5"
• Compatible Rivet Diameters: 2.4mm, 3.2mm, 4mm, 4.8mm

Product Details

• Aluminium body – lightweight yet strong, reducing hand fatigue during extended riveting sessions
• 4 rivet sizes supported – 2.4mm, 3.2mm, 4mm, and 4.8mm covering the most common blind rivet diameters
• 10.5" length – good leverage for consistent, fully-set rivets with minimal effort
• Suitable for automotive bodywork, HVAC, sheet metal fabrication, and general assembly

Materials & Care

• Clear spent mandrels from the collection chamber regularly to maintain smooth operation
• Apply a light coat of oil to the moving parts periodically
• Ensure the correct nosepiece is fitted for the rivet diameter being used
• Store in a dry place away from moisture
• Always use appropriate PPE (eye protection) when riveting

Cut copper and aluminium pipes cleanly and squarely with the THT53321 Pipe Cutter. Built with a high-quality blade and aluminium knob, this industrial-grade cutter handles pipes from 3mm to 32mm in diameter — covering the most common sizes used in plumbing, HVAC, and refrigeration work. No hacksaw mess, no deformation — just a clean, burr-free cut every time.

Specifications

• Model: THT53321
• Cutting Capacity: 3–32mm diameter
• Blade: High quality
• Knob: Aluminium
• Range of Application: Copper and aluminium pipe

Product Details

• High-quality blade – sharp, durable cutting wheel for clean, burr-free cuts on copper and aluminium pipe
• Aluminium knob – lightweight yet strong, with smooth feed for precise depth control
• 3–32mm cutting capacity – covers the most common pipe sizes for plumbing, HVAC, and refrigeration
• Compact design – easy to use in tight spaces where a hacksaw cannot reach
• Suitable for copper and aluminium pipe cutting applications

Materials & Care

• Clean the cutting wheel after each use to remove metal debris
• Apply a light coat of oil to the cutting wheel and feed screw periodically
• Replace the cutting wheel when worn for best results
• Do not use on pipes exceeding 32mm diameter or on steel pipe
• Always use appropriate PPE (gloves, eye protection) when cutting

Shape hedges and shrubs with precision using the THT1516001 Hedge Shears. At 557mm (22") long with a heat-treated carbon steel blade and Teflon coating, these industrial-grade shears cut branches up to 10mm in diameter cleanly and efficiently — with less friction and sap adhesion for a smoother cutting experience session after session.

Specifications

• Model: THT1516001
• Blade Material: Heat treated carbon steel with Teflon coating
• Size: 557mm (22")
• Max. Cutting Capacity: 10mm diameter

Product Details

• Heat-treated carbon steel blade – enhanced hardness and edge retention for long service life
• Teflon-coated blade – reduces friction and sap adhesion for smoother, cleaner cuts
• 10mm max cutting capacity – handles most hedge and shrub trimming tasks
• 557mm (22") length – good reach for shaping hedges without excessive arm strain
• Industrial grade – built for regular, heavy-duty garden and landscaping use

Materials & Care

• Clean blades after each use to remove sap and debris
• Apply a light coat of oil to blades and pivot point to prevent rust
• Store in a dry place away from moisture
• Do not cut branches exceeding 10mm diameter to avoid blade damage
• Always use appropriate PPE (gloves) when operating

Cut through plastic, rubber, and copper/brass wire with ease using the THT525106 Long Straight Aviation Snip. At 300mm (12"), this extended-length snip gives you greater reach and leverage for cutting flexible and non-ferrous materials up to 0.5mm — a versatile tool for electrical, plumbing, and fabrication work.

Specifications

• Model: THT525106
• Type: Long straight aviation snip
• Length: 300mm (12")
• Max. Cutting Capacity: 0.5mm (plastic, rubber & brass wire)
• Range of Application: Plastic, rubber, copper/brass wire

Product Details

• 300mm (12") length – extended reach for greater leverage and access in tight or deep spaces
• Straight-cut design – clean, precise straight cuts through flexible and non-ferrous materials
• Cuts plastic, rubber, and copper/brass wire up to 0.5mm
• Suitable for electrical, plumbing, HVAC, and general fabrication applications

Materials & Care

• Clean blades after each use to remove debris and residue
• Apply a light coat of oil to the blades and pivot to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials beyond the rated cutting capacity
• Always use appropriate PPE (gloves, eye protection) when cutting

Make clean, precise right-hand cuts through sheet metal with the THT523106 Right Cut Aviation Snip. Crafted from Cr-Mo steel for superior toughness and durability, this 250mm snip cuts stainless steel up to 0.7mm and carbon steel up to 1.2mm — ideal for HVAC, roofing, and sheet metal fabrication where right-hand curves and straight cuts are required.

Specifications

• Model: THT523106
• Type: Right cut aviation snip
• Length: 250mm
• Head Material: Cr-Mo steel (Chrome-Molybdenum)
• Max. Cutting Capacity:
• Stainless steel: 0.7mm
• Carbon steel: 1.2mm
• Packaging: 5 pcs

Product Details

• Right-cut design – ideal for cutting curves to the right and straight cuts in sheet metal
• Cr-Mo steel head – chrome-molybdenum alloy for superior toughness, hardness, and wear resistance
• Cuts stainless steel up to 0.7mm and carbon steel up to 1.2mm – versatile for HVAC, roofing, and fabrication
• 250mm length – good balance of leverage and manoeuvrability
• Colour-coded green handle – standard industry colour for right-cut snips for quick identification

Materials & Care

• Clean blades after each use to remove metal shavings and debris
• Apply a light coat of oil to the blades and pivot to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials beyond the rated cutting capacity
• Always use appropriate PPE (gloves, eye protection) when cutting sheet metal

Cut straight lines through sheet metal with precision using the THT522106 Straight Aviation Snip. At 250mm (10") long, this straight-cut snip handles stainless steel up to 0.5mm and carbon steel up to 1.2mm — a reliable workhorse for HVAC, roofing, and sheet metal fabrication tasks.

Specifications

• Model: THT522106
• Type: Straight cut aviation snip
• Length: 250mm (10")
• Max. Cutting Capacity:
• Stainless steel: 0.5mm
• Carbon steel: 1.2mm

Product Details

• Straight-cut design – ideal for clean, straight cuts through sheet metal
• Cuts stainless steel up to 0.5mm and carbon steel up to 1.2mm – versatile for HVAC, roofing, and fabrication work
• 250mm (10") length – good balance of leverage and manoeuvrability
• Colour-coded yellow handle – standard industry colour for straight-cut snips for quick identification

Materials & Care

• Clean blades after each use to remove metal shavings and debris
• Apply a light coat of oil to the blades and pivot to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials beyond the rated cutting capacity
• Always use appropriate PPE (gloves, eye protection) when cutting sheet metal

Make clean, precise left-hand cuts through sheet metal with the THT521106 Aviation Snip. Featuring a unique two-tone soft grip handle for comfort and control, this left-cut aviation snip is built for HVAC, roofing, and sheet metal fabrication work where curved and straight cuts are required.

Specifications

• Model: THT521106
• Type: Left cut aviation snip
• Handle: Two-tone soft grip (unique design)

Product Details

• Left-cut design – ideal for cutting curves to the left and straight cuts in sheet metal
• Two-tone soft grip handle – comfortable, non-slip grip for controlled cutting with reduced hand fatigue
• Suitable for HVAC, roofing, automotive bodywork, and sheet metal fabrication
• Colour-coded red handle – standard industry colour for left-cut snips for quick identification

Materials & Care

• Clean blades after each use to remove metal shavings and debris
• Apply a light coat of oil to the blades and pivot to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials beyond the tool’s rated capacity
• Always use appropriate PPE (gloves, eye protection) when cutting sheet metal

Cut thick branches with less effort using the THTA1527406 Telescopic Lopper. The gear bypass design multiplies your cutting force, slicing through branches up to 40mm in diameter with ease. The aluminium telescopic tube adjusts from 650mm to 850mm for customisable reach, while the 55# carbon steel blade — heat treated and Teflon coated — delivers clean, precise cuts and long-lasting edge retention.

Specifications

• Model: THTA1527406
• Blade Material: 55# carbon steel
• Handle: Aluminium telescopic tube
• Length: 650–850mm (adjustable)
• Max. Cutting Diameter: 40mm
• Mechanism: Gear bypass design
• Blade Treatment: Heat treated & Teflon coated
• Packaging: Paper card

Product Details

• Gear bypass design – mechanical advantage for easier cutting with significantly less hand effort
• 40mm max cutting diameter – handles thick branches that standard loppers cannot manage
• Aluminium telescopic handle – lightweight and adjustable from 650mm to 850mm for customisable reach
• 55# carbon steel blade – high-carbon steel for superior hardness and cutting performance
• Heat-treated blade – enhanced durability and resistance to wear
• Teflon-coated blade – reduces friction and sap adhesion for smoother cuts

Materials & Care

• Clean blades after each use to remove sap and debris
• Apply a light coat of oil to the blade and pivot to prevent rust
• Check telescopic lock mechanism before each use
• Do not cut branches exceeding 40mm diameter to avoid damage
• Store in a dry place away from moisture
• Always use appropriate PPE (gloves) when operating

Keep your garden in shape with the THT0109 Pruning Shears. With a lightweight aluminium body, 200mm length, and a maximum cutting capacity of 12mm, these shears are the go-to tool for trimming stems, small branches, and flowers with precision and ease. Comfortable enough for extended use, durable enough for the daily demands of the garden.

Specifications

• Model: THT0109
• Material: Aluminium
• Length: 200mm (8")
• Max. Cutting Capacity: 12mm

Product Details

• Aluminium body – lightweight yet strong, reducing hand fatigue during extended pruning sessions
• 12mm max cutting capacity – ideal for stems, flowers, small branches, and shrub trimming
• 200mm (8") length – compact and easy to manoeuvre in tight spaces
• Suitable for home gardens, orchards, and landscaping work

Materials & Care

• Clean blades after each use to remove sap and debris
• Apply a light coat of oil to the blade and pivot point to prevent rust
• Store in a dry place away from moisture
• Do not cut branches exceeding 12mm diameter to avoid blade damage
• Always cut away from the body and keep fingers clear of the blade path

Get everything you need for a well-maintained garden with the THT1593301 3-Piece Garden Shears Set. This complete pruning kit includes a pruning shear, lopper, and hedge shear — all with heat-treated, Teflon-coated blades for smooth, clean cuts and long-lasting performance. From trimming roses to shaping hedges and cutting thick branches, this set handles it all.

What's in the Box

• 1 × Pruning Shear (THT15308) – 205mm (8") – for precise trimming of small branches and stems
• 1 × Lopper (THTS1527416) – 640–860mm (25"–34") adjustable – for cutting thick branches with extended reach
• 1 × Hedge Shear (THTS1516306) – 720–880mm (28"–35") adjustable – for shaping hedges and shrubs

Specifications

• Model: THT1593301
• Blade Treatment: Heat treated & Teflon coated
• Set Contents: Pruning shear + Lopper + Hedge shear

Product Details

• Heat-treated blades – enhanced hardness and edge retention for long service life
• Teflon-coated blades – reduces friction and sap adhesion for smoother, cleaner cuts
• Adjustable lopper and hedge shear – telescopic handles for customisable reach and leverage
• Complete 3-piece set – covers all common garden pruning and shaping tasks

Materials & Care

• Clean blades after each use to remove sap and debris
• Apply a light coat of oil to blades and pivot points to prevent rust
• Store in a dry place away from moisture
• Do not cut branches beyond each tool’s rated capacity
• Always use appropriate PPE (gloves) when operating

Tackle thick branches with confidence using the THT1527401 30" Lopper. With an SK5 steel blade, Teflon coating, and heat treatment for superior edge retention, this lopper cuts branches up to 28mm in diameter cleanly and efficiently. The stress-relief blade design reduces binding, while the 760mm length gives you the reach and leverage to prune high or hard-to-access branches without a ladder.

Specifications

• Model: THT1527401
• Head Material: SK5 steel
• Length: 30" (760mm)
• Max. Cutting Diameter: 28mm
• Blade Treatment: Heat treated, Teflon painted
• Blade Feature: Stress relief function
• Packaging: Paper hanger

Product Details

• SK5 steel blade – high-carbon steel for excellent hardness, edge retention, and cutting performance
• Heat-treated blade – enhanced durability and resistance to wear for long service life
• Teflon-coated blade – reduces friction and sap adhesion for smoother, cleaner cuts
• Stress relief function – reduces blade binding and improves cutting efficiency through thick branches
• 28mm max cutting diameter – handles most garden and orchard pruning tasks
• 760mm (30") length – extended reach for pruning without a ladder

Materials & Care

• Clean blades after each use to remove sap and debris
• Apply a light coat of oil to the blade to prevent rust
• Keep the pivot bolt properly tightened for clean, efficient cuts
• Do not cut branches exceeding 28mm diameter to avoid blade damage
• Store in a dry place away from moisture
• Always use appropriate PPE (gloves) when operating

Cut through plastic, fabric, and cardboard with precision using the THSCRS812108 Rubber Grip Long Blade Scissors. The 210mm titanium-plated stainless steel blade with a serrated bottom edge grips soft and flexible materials as you cut — preventing slipping and delivering clean, controlled results every time. The rubber grip handle reduces fatigue during extended use.

Specifications

• Model: THSCRS812108
• Blade Material: Titanium plated stainless steel
• Size: 210mm (8")
• Blade Thickness: 3.2mm
• Bottom Blade: Serrated
• Application: Plastic, fabric, cardboard

Product Details

• Serrated bottom blade – grips soft and flexible materials to prevent slipping during cutting
• Titanium-plated stainless steel blade – harder and more corrosion-resistant than standard stainless for longer edge retention
• 3.2mm blade thickness – robust enough for industrial cutting tasks
• Rubber grip handle – comfortable, non-slip grip for controlled cutting with reduced hand fatigue
• 210mm (8") length – long blade for extended reach and efficient cutting strokes
• Suitable for plastic, fabric, cardboard, and other soft flexible materials

Materials & Care

• Wipe blades clean after each use to maintain cutting performance
• Apply a light coat of oil to the pivot point periodically
• Store in a dry place to prevent corrosion
• Do not use on materials beyond the rated application range
• Always cut away from the body and keep fingers clear of the blade path

Cut sheet metal cleanly and precisely with the THT524121 12" Tin Snip. Drop-forged from high-quality steel for lasting durability, this snip handles carbon steel up to 0.8mm and stainless steel up to 0.6mm with ease. The extra length gives added leverage for tougher cuts, while the double-dipped grip handle provides comfort and control during extended cutting sessions.

Specifications

• Model: THT524121
• Size: 12"
• Material: Drop-forged steel
• Max. Cutting Thickness:
• Carbon steel: ≤0.8mm
• Stainless steel: ≤0.6mm
• Handle: Double-dipped grip
• Packaging: Half double blister

Product Details

• Drop-forged steel construction – superior strength and durability for long service life
• Cuts carbon steel ≤0.8mm and stainless steel ≤0.6mm – suitable for HVAC, roofing, and sheet metal work
• Double-dipped grip handle – comfortable, non-slip grip for controlled cutting with reduced hand fatigue
• 12" size – extra length for greater leverage on tougher or thicker sheet metal cuts

Materials & Care

• Clean blades after each use to remove metal shavings and debris
• Apply a light coat of oil to the blades to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials exceeding the rated cutting thickness
• Always use appropriate PPE (gloves, eye protection) when cutting sheet metal

Cut sheet metal cleanly and precisely with the THT524101 10" Tin Snip. Drop-forged from high-quality steel for lasting durability, this snip handles carbon steel up to 0.8mm and stainless steel up to 0.6mm with ease. The double-dipped grip handle provides comfort and control during extended cutting sessions.

Specifications

• Model: THT524101
• Size: 10"
• Material: Drop-forged steel
• Max. Cutting Thickness:
• Carbon steel: ≤0.8mm
• Stainless steel: ≤0.6mm
• Handle: Double-dipped grip
• Packaging: Half double blister

Product Details

• Drop-forged steel construction – superior strength and durability for long service life
• Cuts carbon steel ≤0.8mm and stainless steel ≤0.6mm – suitable for HVAC, roofing, and sheet metal work
• Double-dipped grip handle – comfortable, non-slip grip for controlled cutting with reduced hand fatigue
• 10" size – ideal balance of leverage and manoeuvrability for straight and curved cuts

Materials & Care

• Clean blades after each use to remove metal shavings and debris
• Apply a light coat of oil to the blades to prevent rust
• Keep the pivot screw properly tightened for clean, precise cuts
• Do not use on materials exceeding the rated cutting thickness
• Always use appropriate PPE (gloves, eye protection) when cutting sheet metal

Handle bigger spraying jobs with the THSPP20202 Hand Pressure Sprayer. With a 2L tank, strong aluminium pump lever, and 2.5 bar operating pressure, this sprayer delivers consistent, controlled spray with a press-and-release function. The adjustable nozzle switches between straight jet and mist spray — versatile for garden watering, pest control, and surface cleaning.

Specifications

• Model: THSPP20202
• Capacity: 2L
• Operating Pressure: 2.5 bar
• Pump Lever: Strong aluminium
• Nozzle: Adjustable – straight jet and mist spray
• Safety: Pressure release valve
• Function: Press and release
• Packaging: Poly bag

Product Details

• Safety pressure release valve – automatically releases excess pressure for safe operation
• Strong aluminium pump lever – durable and comfortable for repeated pumping
• Press and release function – spray on demand without continuous trigger pressure
• Adjustable nozzle – switch between straight jet (targeted) and mist spray (wide coverage)
• 2L capacity – larger tank for extended spraying sessions with fewer refills

Materials & Care

• Rinse the tank thoroughly after each use, especially when switching between chemicals
• Do not exceed the 2.5 bar maximum operating pressure
• Store with the pressure released and tank empty when not in use
• Inspect seals and nozzle regularly – replace if worn or leaking
• Always use appropriate PPE (eye protection, gloves) when spraying chemicals

Tackle garden watering, pest control, and surface cleaning with the THSPP201502 Hand Pressure Sprayer. With a 1.5L tank, strong aluminium pump lever, and 2.5 bar operating pressure, this sprayer delivers consistent, controlled spray with a press-and-release function. The adjustable nozzle switches between straight jet and mist spray — versatile enough for the garden, workshop, or farm.

Specifications

• Model: THSPP201502
• Capacity: 1.5L
• Operating Pressure: 2.5 bar
• Pump Lever: Strong aluminium
• Nozzle: Adjustable – straight jet and mist spray
• Safety: Pressure release valve
• Function: Press and release
• Packaging: Poly bag

Product Details

• Safety pressure release valve – automatically releases excess pressure for safe operation
• Strong aluminium pump lever – durable and comfortable for repeated pumping
• Press and release function – spray on demand without continuous trigger pressure
• Adjustable nozzle – switch between straight jet (targeted) and mist spray (wide coverage)
• 1.5L capacity – sufficient for garden, pest control, and cleaning tasks

Materials & Care

• Rinse the tank thoroughly after each use, especially when switching between chemicals
• Do not exceed the 2.5 bar maximum operating pressure
• Store with the pressure released and tank empty when not in use
• Inspect seals and nozzle regularly – replace if worn or leaking
• Always use appropriate PPE (eye protection, gloves) when spraying chemicals