Sikagard®-62
$231.00
Sale price
$231.00
Regular price
Skip to product information
Sikagard®-62
$231.00
Sale price
$231.00
Regular price
Sikagard®-62
A 2-part, rigid, 100% solids high-build epoxy resin protective coating. Solvent-free with excellent mechanical and chemical resistance. Suitable for chemical-resistant lining of storage tanks, silos, and anti-corrosion coating on steel in food processing, sewage, agricultural, and pharmaceutical facilities. CE marked per EN 1504-2 and WRAS approved for contact with potable water.
Overview
Specifications
| Property | Value |
|---|---|
| Type | 2-component 100% solids epoxy resin protective coating |
| Mixing Ratio | Part A : Part B = 3 : 1 (by weight) |
| Density – Part A | ~1.45 kg/L |
| Density – Part B | ~1.02 kg/L |
| Density – Mixed | ~1.37 kg/L |
| Solid Content | ~100% |
| Shore D Hardness | ~80 (DIN 53505) |
| Tensile Adhesion Strength | >1.5 N/mm² to concrete (ISO 4624) |
| Layer Thickness | ~0.2 mm per layer |
| Consumption | ~0.30 kg/m² per layer |
| Temperature Resistance (permanent) | +50°C dry heat |
| Temperature Resistance (max. 7 days) | +80°C |
| Temperature Resistance (max. 12 hours) | +100°C |
| Shelf Life | 12 months (Part A and Part B) from date of production |
| Storage | Dry, +5°C to +30°C, original sealed packaging, away from direct sunlight |
Mechanical Resistance (Taber Abraser)
| Test Condition | Result |
|---|---|
| CS 10 / 1000 / 1000 | 24.4 mg |
| CS 17 / 1000 / 1000 | 70 mg |
| H 22 / 1000 / 1000 | 560.6 mg |
Usage
- Chemical resistant protective layer on concrete, stone, cementitious mortars, epoxy cement, epoxy resin products, and steel
- Lining in storage tanks and silos
- Anti-corrosion coating on steel in food processing plants, sewage works, farms, agricultural enterprises, chemical and pharmaceutical facilities, and beverage industry
Advantages
- Solvent free – 100% solids
- Good mechanical and chemical resistance
- High build – ~0.2 mm per layer
- Impervious to liquids
- Easy to mix and apply
- CE marked per EN 1504-2 (concrete protection)
- WRAS approved for contact with potable water (BS 6920-1:2000)
- LEED v2009 IEQc 4.2 compliant
Packaging
- 12 kg set (Part A + Part B)
Colour
- RAL 7032 (Pebble Grey) – other colours on request
Product Details
Product Information
| Property | Detail |
|---|---|
| Composition | Epoxy resin (2-component, 100% solids) |
| Shelf Life | 12 months from date of production (Part A and Part B) |
| Storage Conditions | Dry, +5°C to +30°C, original sealed packaging, protected from direct sunlight |
Pot Life
| Temperature | Pot Life |
|---|---|
| +10°C | ~30 minutes |
| +20°C | ~20 minutes |
| +30°C | ~10 minutes |
Waiting Time / Overcoating & Full Cure
| Temperature | Min. Overcoating | Max. Overcoating | Full Cure |
|---|---|---|---|
| +10°C | ~30 hours | ~3 days | ~14 days |
| +20°C | ~10 hours | ~2 days | ~10 days |
| +30°C | ~6 hours | ~1 day | ~5 days |
Application
Application Information
| Parameter | Value |
|---|---|
| Mixing Ratio | Part A : Part B = 3 : 1 (by weight) |
| Layer Thickness | ~0.2 mm per layer |
| Consumption | ~0.30 kg/m² per layer |
| Ambient Temperature | +8°C min / +40°C max |
| Substrate Temperature | +8°C min / +40°C max (min. 3°C above dew point) |
| Relative Humidity | <80% |
Application Steps
- Substrate Preparation – Concrete: Prepare mechanically to achieve an open-textured surface. Remove weak areas, expose blowholes and voids. Remove all dust and loose material by brush and/or vacuum. Fill open voids with a suitable Sika® pore filling mortar. Level surface roughness with a suitable Sika® rendering and levelling mortar. Use a suitable primer on high-absorbent, non-sound, or non-cement-based substrates.
- Substrate Preparation – Steel: Abrasive blast clean to SSPC-SP 10 “near white metal” or Sa 2½ (ISO EN 12944-4). Prepare welds and joints per EN 14879 Part 1. Remove all dust, dirt, and blasting material. Use air-conditioning to maintain surface conditions after blast cleaning.
- Mixing: Stir Part A mechanically before use. Add all of Part B to Part A and mix continuously for 3 minutes using a low-speed stirrer (300–400 rpm) to avoid air entrapment. Pour into a clean container and stir again to ensure thorough mixing. Use only within the pot life.
- Application: Apply by brush, roller, or airless spray at ~0.30 kg/m² per layer (~0.2 mm DFT). Apply multiple coats as required within the overcoating window.
- Cleaning: Clean all tools immediately with Thinner C. Hardened/cured material can only be removed mechanically.