Battery-Powered Hand Vacuum Cleaner VCH 2

The Kärcher VCH 2 is a lightweight, cordless hand vacuum weighing just 650 grams, yet packed with serious suction power. Its two-stage filter system — combining a fine steel mesh and a HEPA 12 filter — captures 99.5% of particles as small as 0.3 μm, making it ideal for allergy sufferers and quick clean-ups at home, in the car, or at the office.

Specifications

Product Features

• Two-stage filter system — Fine steel mesh catches coarse particles and hair; downstream HEPA 12 filter retains 99.5% of particles smaller than 0.3 μm for exceptionally clean air output.
• Washable filter & dust container — Both rinse clean under running water for easy maintenance and reuse — no replacement bags needed.
• Ultra-lightweight at 650g — Comfortable to hold and manoeuvre for extended cleaning sessions.
• Lithium-ion battery — Reliable cordless power with up to 11 minutes of runtime and quick recharge capability.
• Compact design — Slim profile fits easily in a drawer, glove box, or desk storage for instant access.
• Ideal for allergy sufferers — HEPA 12 filtration ensures rooms are not just cleaned but the air stays fresh.
• Application range — Furniture, upholstery, vehicle interiors, desks, and hard-to-reach crevices.

Pressure Washer K 2.360

The Kärcher K 2.360 is a compact, wheeled pressure washer built for occasional use and light dirt around the home and garden. With up to 120 bar of pressure, a maintenance-free three-piston axial pump, and a 6-metre high-pressure hose, it handles bicycles, garden tools, and outdoor furniture with ease.

Specifications

Product Features

• Three-piston axial pump — Completely maintenance-free for long-lasting, reliable performance.
• Vario Power Jet — Adjustable pressure lance for flexible cleaning across different surfaces and dirt levels.
• Dirt Blaster rotation nozzle — Increases cleaning performance for stubborn dirt and grime.
• Integrated detergent tank — Built-in suction mechanism for convenient detergent application without separate equipment.
• 6m high-pressure hose — Extended reach for cleaning larger areas without repositioning the machine.
• Generous storage hook — Tidy hose and cable storage directly on the device.
• Integrated accessory storage — Hose, spray lances, and trigger gun stored neatly and compactly on the machine.
• Two smooth-running wheels — Easy to manoeuvre and transport around the garden or driveway.
• Integrated water filter — Protects the pump from dirt particles in the water supply.
• Application range — Bicycles, garden tools, garden furniture, terraces, and balconies.

Wet and Dry Vacuum Cleaner WD 3 V-17/4/20

The Kärcher WD 3 V-17/4/20 is a powerful yet energy-efficient wet and dry vacuum cleaner with an excellent price-performance ratio. Its one-piece cartridge filter handles both wet and dry dirt without filter changes, while the compact 17-litre plastic container, blower function, and smart onboard storage make it a highly practical choice for the home, garage, and workshop.

Specifications

Product Features

• One-piece cartridge filter — Vacuum wet and dry dirt without changing the filter; simple twist-in/out installation with no locking parts.
• 3-layer fleece filter bag — Extremely tear-resistant with high dust retention capacity for longer-lasting suction power.
• Blower function — Cleans hard-to-reach areas where vacuuming isn’t possible, such as gravel beds and tight corners.
• Pull & Push locking system — Quick, easy, and safe opening and closing of the container.
• Hose storage on device head — Suction hose hangs neatly on the device head for space-saving storage; intuitive for left- and right-handed users.
• Onboard accessory & cable storage — Tubes and floor nozzles on the bumper, cable on integrated hooks, small parts on the storage shelf.
• Detachable handle with parking position — Accessories attach directly to the suction hose; handle parks on the device head during breaks.
• Ergonomic folding carry handle — Comfortable transport with 4 castors for easy manoeuvrability.
• Wide application range — Terrace, garage, workshop, cellar, vehicle interior, hobby room, entrance areas, and liquids.

Vacuum Cleaner VC 3 Plus

The Kärcher VC 3 Plus is a bagless multi-cyclone vacuum cleaner that combines consistent suction power with low running costs and whisper-quiet operation. With a washable waste container, HEPA 12 filtration capturing 99.5% of dust and particles, and an elegant compact design, it is the ideal choice for modern family homes — especially for allergy sufferers.

Specifications

Product Features

• Multi-cyclone technology — No loss of suction power throughout the entire cleaning session, regardless of how full the container is.
• Bagless & washable container — 0.9L transparent waste container rinses clean with water — no replacement filter bags needed, saving ongoing costs.
• HEPA 12 filter — Captures 99.5% of dust and fine particles for exceptionally clean air output — ideal for allergy sufferers.
• Transparent waste container — See the dirt level and cleaning progress at a glance.
• Low noise operation — Quiet enough for daily family use without disruption.
• 7.5m operating radius — Wide reach for cleaning large rooms without repositioning.
• Automatic cable rewind — Tidy cable management at the press of a button.
• Soft grip handle & parking position — Comfortable to use and easy to park during breaks.
• Versatile cleaning — Hard floors, carpets, corners, crevices, gaps, and hard-to-reach areas.

Pressure Washer K2 Power Control

The Kärcher K2 Power Control is a smart, app-connected pressure washer that guides you to perfect cleaning results every time. With adjustable pressure from 20 to 110 bar, a height-adjustable telescopic handle, and integrated detergent suction, it is compact, easy to use, and ideal for bicycles, garden furniture, and areas around the home.

Specifications

Product Features

• Kärcher Home & Garden app — Built-in application consultant with tips, tricks, machine info, and access to the Kärcher Service portal for every cleaning task.
• Vario Power spray lance — Pressure adjustable directly on the lance (20–110 bar); symbols display the active setting at a glance.
• Dirt Blaster rotation nozzle — Boosts cleaning performance for stubborn dirt and grime.
• Quick Connect system — Two spray lances attach and detach easily with device-side Quick Connect adapter.
• Height-adjustable telescopic handle — Set to a comfortable pulling height; fully retractable for compact storage.
• Integrated suction hose — Apply detergents quickly and conveniently without separate equipment.
• Integrated water filter — Protects the pump from dirt particles in the water supply.
• Lightweight & compact — Only 4 kg, easy to carry and store in tight spaces.
• Wide application range — Bicycles, garden tools, garden furniture, patios, balconies, and small cars.

Pressure Washer K2 HR

The Kärcher K2 HR is a versatile and mobile pressure washer with a built-in passive hose reel for tidy, hassle-free storage. Delivering up to 110 bar of pressure with a 10-metre high-pressure hose, it is ideal for removing light to moderate dirt around the home, garden, and outdoor equipment.

Specifications

Product Features

• Passive hose reel — Keeps the 10m high-pressure hose neatly stored on the device for easy transport and tidy storage.
• Hose & cord storage — Integrated hook and reel for orderly cable and hose management.
• Dirt Blaster rotation nozzle — Increases cleaning performance by up to 80% for stubborn dirt.
• Integrated detergent suction — Apply cleaning agents directly for enhanced cleaning results.
• Foam jet included — 0.3 l foam jet for pre-soaking surfaces before washing.
• Quick Connect system — High-pressure hose clicks in and out of the device and gun quickly and effortlessly.
• Smooth-running wheels & long handle — Ergonomic handle height and large wheels for optimum mobility.
• Integrated water filter — Protects the pump from dirt particles in the water supply.
• Wide application range — Bicycles, motorbikes, garden furniture, fences, terraces, balconies, and garden tools.

Pressure Washer K2 Power VPS

The Kärcher K2 Power VPS is a compact and reliable pressure washer built for everyday cleaning around the home and garden. Featuring an aluminium pump, induction motor, and the innovative Vario Power Jet Short 360°, it delivers adjustable pressure from 20 to 100 bar — powerful enough for patios and vehicles, yet gentle enough for delicate surfaces.

Specifications

Product Features

• Vario Power Jet Short 360° — Swivel-mounted nozzle head with infinitely variable pressure adjustment (20–100 bar) for close-by and hard-to-reach areas.
• Aluminium pump & induction motor — Robust, long-lasting, and pleasantly quiet during operation.
• Compact & portable design — Easy to carry and store in a car boot or tight storage spaces.
• 7.5m high-pressure hose — Extended reach for versatile outdoor cleaning without repositioning.
• 0.45m extension lance — Ideal for out-of-reach areas without dismantling the system.
• Quick Connect system — High-pressure hose clicks in and out of the device and gun quickly and effortlessly.
• Foam jet detergent application — Apply cleaning agents directly through the nozzle for enhanced results.
• Integrated water filter — Protects the pump from debris in the water supply.
• Wide application range — Cars, motorbikes, bicycles, garden furniture, patios, fences, outside steps, and mobile homes.

Dry Vacuum Cleaner T 14/1 Classic

The Kärcher T 14/1 Classic is a lightweight, robust dry vacuum cleaner designed for uninterrupted cleaning performance. With a powerful 1600W turbine, a 14-litre catch pan, and a washable permanent nylon filter, it delivers strong suction and low running costs across all floor types.

Specifications

Product Features

• Foot switch on/off — No need to bend down; start and stop with ease using the large foot pedal.
• 14-litre catch pan — Large capacity for long, uninterrupted vacuuming intervals.
• Washable permanent nylon filter — Optimal dust separation with no ongoing filter bag costs.
• Quick filter bag change — Two flaps on the turbine head allow near-instant bag replacement.
• Integrated accessory storage — Suction pipes and nozzles stored securely on the machine, always within reach.
• Accessory holder for small nozzles — Nozzles clip directly to the pipe for instant access.
• Secure cable hook — Prevents tripping hazards during transport and storage.
• Ergonomic handle & robust chassis — 2 track rollers and steering castors for effortless manoeuvrability across all surfaces.
• Versatile application — Suitable for all floors, from hard surfaces to carpets.

Wet and Dry Vacuum Cleaner NT 30/1 Me Classic

The Kärcher NT 30/1 Me Classic is a powerful and compact wet and dry vacuum cleaner built for medium-sized cleaning tasks. Equipped with a 1300W turbine and a 30-litre stainless steel container, it handles dust, coarse dirt, and liquids with ease. Its innovative Easy Service Concept allows turbine removal in just 44 seconds, minimising downtime and maintenance costs.

Specifications

Product Features

• Compact & mobile — Slimline form with 4 castors for excellent stability and easy manoeuvrability.
• All-round bumper protection — Protects the vacuum cleaner and equipment during use.
• 1300W turbine — Reliably removes a wide variety of soiling including dust, coarse dirt, and liquids.
• Easy Service Concept — Turbine removal in just 44 seconds for fast, cost-effective maintenance.
• Large permanent filter basket — Enables optional dust separation and continuous vacuuming without a filter bag.
• No filter bag costs — Reduces ongoing consumable expenses.
• Stainless steel container — Durable and suitable for absorbing liquids, coarse dirt, and dust.
• Versatile application — Ideal for all hard surfaces and car interior cleaning.

T 8/1 Classic

A light, robust 1600W dry vacuum cleaner with an 8-litre catch pan combining high operating comfort with strong suction power at an excellent price-performance ratio. Features a large washable permanent filter for optimal dust separation, foot switch operation, and a clever filter bag change system via two tabs at the turbine head.

Overview

Specifications

Scope of Supply

• Suction hose: 2 m with bend
• Suction tube: 1 piece, 505 mm, steel
• Switchable floor nozzle (carpet and hard floors)
• Upholstery nozzle
• Crevice nozzle
• Suction brush
• Filter bag: 1 piece, paper
• Motor protection filter

Features & Benefits

• Large Washable Permanent Filter: Optimal dust separation – vacuum with or without filter bag. Washable for long service life and low running costs
• Foot Switch Operation: No bending down during everyday work – start and stop with your foot
• Fast Filter Bag Change: Two tabs at the turbine head make filter bag replacement unbelievably simple and fast
• On-Board Accessory Storage: Practical storage at the rear keeps all accessories within reach
• Large Cord Hook: Power cable always stored safely for transport
• Ergonomic Handle & Robust Chassis: 2 smooth-running rollers and castors for easy transport over steps and longer distances
• Long 7.5m Cable: Greater reach without needing to change power sockets

Application Areas

• Dry vacuuming on all hard floor surfaces
• Carpets and upholstery
• Commercial and professional cleaning environments
• Offices, workshops, and retail spaces

Product Details

Technical Data

K 4 Power Control

A versatile 1.8kW pressure washer with adjustable pressure from 20 to 130 bar, designed for a wide range of cleaning tasks around the home. Features the G 160 Q Power Control spray gun with on-gun pressure adjustment, Plug 'n' Clean detergent system, and compatibility with the Kärcher Home & Garden app for smart usage guidance and maintenance tips.

Overview

Specifications

Scope of Supply

• G 160 Q Power Control spray gun (adjustable pressure on gun)
• Vario Power Jet spray lance
• Dirt Blaster rotating point jet nozzle
• 8 m high-pressure hose
• Garden hose adapter (A 3/4”)

Features & Benefits

• G 160 Q Power Control Spray Gun: Adjust pressure directly on the gun to match the cleaning task – from gentle rinsing to powerful blasting
• Vario Power Jet: Continuously adjustable pressure lance for versatile surface cleaning
• Dirt Blaster (+100% Power): Rotating point jet nozzle for stubborn dirt – increases cleaning performance by up to 80%
• Plug ’n’ Clean Detergent System: Quick and easy detergent bottle connection for efficient cleaning with Kärcher cleaning agents
• Water-Cooled Motor: Ensures long service life and reliable performance
• Integrated Water Filter: Protects the motor from particles in the water supply
• Telescopic Handle & Compact Design: Convenient storage and easy transport
• Kärcher Home & Garden App: Smart guidance for usage, cleaning tips, and maintenance reminders

Application Areas

• Cars, motorbikes, and bicycles
• Patios, driveways, and stone floors
• Garden furniture and fences
• Walls and façades
• Medium to large areas around the home

Product Details

Technical Data

WD 1s Classic

A compact yet powerful 1300W multi-purpose wet and dry vacuum cleaner with an 18-litre stainless steel container. Picks up wet and dry dirt effortlessly, features a practical blower function, and comes with two floor nozzles for versatile use in and around the home, garage, cellar, and car interiors. Space-saving accessory storage built into the device head.

Overview

Specifications

Scope of Supply

• Suction hose: 1.5 m
• Suction tubes: 2 pieces, 0.5 m each, 35 mm nominal width, plastic
• Wet and dry floor nozzle: clips type
• Dry vacuum nozzle: switchable for carpet and hard floors
• Crevice nozzle
• Paper filter bags: 1 piece
• Foam filter: 1 piece
• Textile filter bag: 1 piece

Equipment

• Blower function
• Hose storage on device head
• Additional accessory storage on device head
• Storage space for small parts
• Cable hook
• Wheels for easy mobility

Features & Benefits

• Suitable for Numerous Uses: Effortlessly picks up wet and dry dirt – liquids, dust, coarse debris, and more
• Practical Blower Function: Use where vacuuming is not possible – blow out debris from hard-to-reach areas
• 18L Stainless Steel Container: Robust, impact and corrosion resistant with large capacity
• 2 Floor Nozzles Included: Universal clips nozzle for wet/dry cleaning + switchable nozzle for carpet and hard floors
• Space-Saving Accessory Storage: All accessories stored safely in the device head with bumpers
• Ergonomic Carrying Handle: Easy and convenient transport
• Cable Hook: Neat cable management during storage

Application Areas

• Home, garden, balcony, and entrance areas
• Living room, cellar, and garage
• Vehicle interiors
• Workshop and hobby room
• Picking up liquids

Product Details

Technical Data

NT 30/1 Me Classic

A powerful 1300W professional wet and dry vacuum cleaner with a 28-litre stainless steel container. Effortlessly vacuums medium-sized quantities of liquids, coarse dirt, and dust. Features the innovative Easy Service Concept for turbine removal in just 44 seconds, and a large permanent filter basket for continuous vacuuming without filter bags.

Overview

Specifications

Scope of Supply

• Suction hose: 1.7 m with bend
• Suction tube: 1 piece, 480 mm, plastic
• Filter bag: 1 piece, fleece material
• Wet/dry floor nozzle: 360 mm width
• Cartridge filter: PES
• Stainless steel container

Features & Benefits

• Easy Service Concept: Turbine can be removed in just 44 seconds – saves time and maintenance costs
• Powerful 1300W Turbine: Reliably removes a wide variety of soiling including liquids, coarse dirt, and dust
• Large Permanent Filter Basket: Enables optional dust separation and continuous vacuuming without filter bags – no ongoing filter bag costs
• PES Cartridge Filter: High-efficiency filtration for fine dust capture
• Compact & Mobile: Slimline form with 4 castors for excellent stability and easy manoeuvrability
• All-Round Bumper Protection: Protects the vacuum cleaner and surrounding equipment
• Stainless Steel Container: Durable and easy to clean 28L capacity

Application Areas

• Absorbing liquids, coarse dirt, and dust on all hard surfaces
• Cleaning car interiors
• Commercial and professional cleaning environments
• Workshops, lobbies, and medium-sized indoor areas

Product Details

Technical Data

K 3 Deluxe Premium

A powerful 1600W pressure washer with an innovative water-cooled asynchronous motor, ideal for cleaning moderate dirt on cars and medium-sized areas around the home. Features an integrated hose reel, Vario Power spray lance for adjustable pressure, and a Dirt Blaster rotating point jet that increases cleaning performance by up to 80% for stubborn dirt.

Overview

Specifications

Scope of Supply

• High-pressure gun: G 180 Q
• Vario Power Jet spray lance
• Dirt Blaster rotating point jet nozzle
• High-pressure hose: 10 m
• Adapter for A3/4” garden hose connector

Equipment

• Integrated high-pressure hose reel
• Detergent application via suction hose
• Water-cooled asynchronous motor
• Integrated water filter
• Telescopic handle for easy transport
• Integrated accessory storage

Features & Benefits

• Water-Cooled Asynchronous Motor: Very powerful and durable – motor is cooled by water flow for extended service life
• Vario Power Jet: Adjustable pressure by simply turning the spray lance – adapt to any cleaning task and level of contamination
• Dirt Blaster (+100% Power): Rotating point jet nozzle increases cleaning performance by up to 80% for stubborn dirt
• Integrated Hose Reel: Simple hose handling – no tangling, easy storage
• Detergent Inlet: Kärcher detergents increase cleaning efficiency and protect surfaces
• Telescopic Handle: Convenient transport and manoeuvrability
• Integrated Accessory Storage: Accessories always ready to hand on the device
• Integrated Water Filter: Protects the pump from particles in the water supply

Application Areas

• Cars, motorbikes, and scooters
• Bicycles and garden tools
• Garden, terrace, and balcony furniture
• Fences and stone floors
• Medium-sized areas around the home

Product Details

Technical Data

Sikagard®-703 GroutSeal

A ready-to-use, low viscosity silane/siloxane water repellent impregnation in aqueous phase. Deeply penetrates tile joints, concrete, and building surfaces to provide strong water resistance without changing the substrate appearance. Reduces dirt pick-up and inhibits fungal and algal growth. Water-based and environmentally friendly.

Overview

Specifications

Consumption

Usage

• Making tile joints and building surfaces water repellent
• Protecting against water ingress through hairline cracks in tile joints and concrete
• Exterior walls, roof tiles, brick, concrete, and mortar surfaces

Advantages

• Strong water repellent capability in aqueous phase
• Deeply penetrates tile joints and building surfaces
• Treatment is usually invisible – does not change substrate appearance
• Improves resistance to dirt pick-up
• Reduces fungal and algal growth
• Can be overcoated with suitable water or solvent-based polymer paints
• Ready to use – no mixing required
• Water-based and environmentally friendly

Packaging

• 500 ml bottle
• 1 L pail
• 5 L pail

Colour

• Whitish liquid (treatment is invisible after application)

Product Details

Product Information

Application

Application Information

Application Steps

• Substrate Preparation: Surface must be clean, dry, and free from dust, dirt, grease, oil, and loose particles. Ensure tile joints are sound and free from old sealant residues.
• Application: Apply Sikagard®-703 GroutSeal using a low-pressure spray gun, brush, or roller in a single layer from top to bottom. Take care not to let the product run or pool on the surface.
• Protection: Protect the treated surface from rain for at least 3 hours at +20°C after application.
• Overcoating: Can be overcoated with water or solvent-based polymer paints – contact the paint manufacturer for compatibility details. For Sikagard® polymer paint, wait at least 5 hours before applying.
• Cleaning: Clean all tools and equipment with water immediately after use. Hardened or cured material can only be removed mechanically.

Sikagard®-62

A 2-part, rigid, 100% solids high-build epoxy resin protective coating. Solvent-free with excellent mechanical and chemical resistance. Suitable for chemical-resistant lining of storage tanks, silos, and anti-corrosion coating on steel in food processing, sewage, agricultural, and pharmaceutical facilities. CE marked per EN 1504-2 and WRAS approved for contact with potable water.

Overview

Specifications

Mechanical Resistance (Taber Abraser)

Usage

• Chemical resistant protective layer on concrete, stone, cementitious mortars, epoxy cement, epoxy resin products, and steel
• Lining in storage tanks and silos
• Anti-corrosion coating on steel in food processing plants, sewage works, farms, agricultural enterprises, chemical and pharmaceutical facilities, and beverage industry

Advantages

• Solvent free – 100% solids
• Good mechanical and chemical resistance
• High build – ~0.2 mm per layer
• Impervious to liquids
• Easy to mix and apply
• CE marked per EN 1504-2 (concrete protection)
• WRAS approved for contact with potable water (BS 6920-1:2000)
• LEED v2009 IEQc 4.2 compliant

Packaging

• 12 kg set (Part A + Part B)

Colour

• RAL 7032 (Pebble Grey) – other colours on request

Product Details

Product Information

Pot Life

Waiting Time / Overcoating & Full Cure

Application

Application Information

Application Steps

• Substrate Preparation – Concrete: Prepare mechanically to achieve an open-textured surface. Remove weak areas, expose blowholes and voids. Remove all dust and loose material by brush and/or vacuum. Fill open voids with a suitable Sika® pore filling mortar. Level surface roughness with a suitable Sika® rendering and levelling mortar. Use a suitable primer on high-absorbent, non-sound, or non-cement-based substrates.
• Substrate Preparation – Steel: Abrasive blast clean to SSPC-SP 10 “near white metal” or Sa 2½ (ISO EN 12944-4). Prepare welds and joints per EN 14879 Part 1. Remove all dust, dirt, and blasting material. Use air-conditioning to maintain surface conditions after blast cleaning.
• Mixing: Stir Part A mechanically before use. Add all of Part B to Part A and mix continuously for 3 minutes using a low-speed stirrer (300–400 rpm) to avoid air entrapment. Pour into a clean container and stir again to ensure thorough mixing. Use only within the pot life.
• Application: Apply by brush, roller, or airless spray at ~0.30 kg/m² per layer (~0.2 mm DFT). Apply multiple coats as required within the overcoating window.
• Cleaning: Clean all tools immediately with Thinner C. Hardened/cured material can only be removed mechanically.

Sikadur®-732

A solvent-free, thixotropic 2-component structural epoxy resin adhesive. Provides a high-strength bond between new and old concrete, steel, masonry, and wood. Highly effective on dry surfaces with high early and final strength. Suitable for grouting bolts, dowels, and pins.

Overview

Specifications

Technical Information

Usage

• Bonding fresh, plastic concrete to hardened concrete and steel
• Grouting bolts, dowels, and pins
• Structural adhesive for concrete, masonry, metal, and wood

Advantages

• High strength bonding and adhesion
• Excellent adhesion to most structural materials
• High early and final strength
• Highly effective on dry surfaces
• Solvent-free

Packaging

• 5 kg set (Component A + Component B)

Colour

• Concrete grey

Product Details

Product Information

Application

Application Information

Application Steps

• Substrate Preparation: Surface must be clean and sound. May be dry or damp but free of standing water. Remove dust, laitance, grease, curing compounds, impregnations, waxes, foreign particles, and disintegrated materials. Concrete: sandblast or use other approved mechanical methods. Steel: sandblast to white metal finish (SA 2½).
• Mixing: Pre-mix each component separately. Proportion 2 parts Component A to 1 part Component B into a clean pail. Mix thoroughly for 3 minutes with a paddle on low-speed drill (400–600 rpm) until uniform in colour. Mix only the quantity that can be used within the pot life.
• Application: Apply Sikadur®-732 evenly onto the prepared substrate at 0.3–0.8 kg/m² using a brush, roller, or trowel. Place fresh concrete or structural element onto the adhesive while it is still wet and tacky. For bolt/dowel grouting, inject or pour into the hole and insert the bolt immediately.
• Important Notes: Do not exceed the pot life. Do not add solvents or thinners. Protect from rain and moisture until fully cured.

Sika MonoTop®-613 IND

A cementitious, fibre reinforced, polymer modified 1-component repair mortar mixed with water only. Excellent thixotropic behaviour makes it suitable for overhead and vertical applications up to 40 mm in a single layer. Ideal for repairing damaged, spalled, and honeycombed concrete caused by reinforcement corrosion.

Overview

Specifications

Compressive Strength

Flexural Strength

Usage

• Repairing damaged and spalled concrete on vertical areas caused by reinforcement corrosion
• General concrete repair and refurbishment work
• Repair of honeycombed, damaged, and spalled concrete
• Part of a concrete repair system in combination with Sika MonoTop®-610 as bonding primer and reinforcement corrosion protection

Features

• Mixed with water only – 1-component, easy to use
• Excellent workability with adjustable consistency
• Excellent thixotropic behaviour – suitable for overhead and vertical applications
• Good mechanical strengths (45 N/mm² compressive at 28 days)
• Excellent frost resistance
• Applicable in layers up to 40 mm thickness (vertical area)
• Non-corrosive, non-toxic
• Low shrinkage curing

Packaging

• 25 kg bag

Colour

• Grey powder

Product Details

Product Information

Application

Application Information

Application Steps

• Substrate Preparation: Substrate must be sound and free of loose or weak particles, dust, and dirt. Completely remove oil, wax, laitance, and poorly bonded coatings. For optimum bond, roughen the surface well.
• Mixing: Pour the required quantity of clean water into the mixing container. Add powder while mixing continuously using a low-speed electric mixer (max. 500 rpm) for 3 minutes, avoiding air entrapment. Add powder in portions to achieve the desired consistency. Do not add extra water after mixing.
• Application: Apply with a spatula or trowel onto a well-saturated concrete substrate. For thickness greater than 40 mm, apply in several layers. Once the mortar starts to set, smooth with a wooden or synthetic float or a styrofoam block.
• Bonding Coat: For large area applications, apply SikaTop 121 as a bonding coat before applying Sika MonoTop®-613 IND for optimum adhesion.
• Curing: Keep mortar moist if exposed to strong sunshine or wind to prevent premature drying. Standard curing methods are recommended. For a very fine surface finish, apply SikaTop 121 as a filling compound on top after curing.
• Cleaning: Clean tools and mixing equipment with water while material is still fresh. Hardened material can only be removed mechanically.

SikaShield® W159 ED 1.5mm

A polymer modified bituminous waterproofing membrane wet-applied to concrete using adhesive mortar SikaShield® W1. Flame-free installation makes it safe for confined spaces. Reinforced with cross-laminated PE film for high mechanical performance. Fully bonded and watertight against lateral water migration. Can be applied on wet concrete.

Overview

Specifications

Usage

• Basements and below-ground structures
• Vertical reinforced concrete walls
• Single and strip foundations
• Single layer under heavy protection
• Base sheet in multi-layer waterproofing systems
• Note: Not suitable for roofs permanently exposed to UV radiation

Advantages

• No-torch application – safe for confined spaces
• Fully bonded system for reliable waterproofing
• Watertight against lateral water migration (70 m resistance)
• Can be applied on wet concrete
• Fast and easy installation
• Flame-free application
• Requires minimal surface preparation
• High impact resistance (240 N static puncture)

Packaging

• 1 roll = 1.0 m wide × 20.0 m long (20 m²)

Colour

• Top and bottom surface: Removable foil liner

Product Details

Product Information

Application

Application Information

Application Steps

• Substrate Preparation: Apply adhesive mortar SikaShield® W1 onto the water-saturated concrete substrate while still wet. Refer to the SikaShield® W1 PDS for full substrate condition requirements.
• Alignment: Unroll the membrane and align it. Re-roll before application. Lay membranes parallel to avoid coinciding joints. When applying over another bituminous membrane, straddle the overlaps of the previous layer.
• Wet Application: Lay the membrane directly over the wet adhesive mortar. At one end, peel away part of the release liner from the underside. Bond this end to the adhesive and substrate. Continue peeling the liner sideways while bonding the rest of the membrane.
• Rolling: Roll the applied membrane surface with a roller from the centre to the edge to remove air bubbles. Push any excess adhesive towards the opposite direction of the sealed side overlap.
• Overlap Sealing: If ambient temperature is below +10°C, seal membrane overlaps by heating with a gas torch or hot air to ensure proper adhesion and prevent adhesive trapping under the overlap.
• Curing & Backfilling: Allow adhesive mortar to cure for at least 24 hours at +25°C before backfilling. Complete backfilling within 7 days of application.
• Detailing: Use a sharp knife to cut around internal/external corners, upstands, vent pipes, drains, and support metalwork. Refer to the relevant method statement for detailing guidance.
• Footwear: Use flat-profile footwear only – spikes or sharp protrusions may puncture the membrane.

SikaShield® P24 S 4mm

An APP modified bituminous waterproofing membrane reinforced with non-woven polyester fabric. The sand top surface ensures excellent bond for overlying layers. Torch-applied via burn-off film on the underside for a fully bonded installation. Flexible at 0°C and suitable as a base sheet in multi-layer systems under protective layers, tiles, or ballast.

Overview

Specifications

Usage

• Waterproofing membrane for balconies and terraces under heavy protection layers (tiles or gravel)
• Flat and sloping roofs under protective layers or ballast
• Car park decks
• Wet areas
• Basements and below-ground structures
• Horizontal reinforced concrete slabs, decks, podiums, and protrusions
• Vertical reinforced concrete walls
• Base sheet in multi-layer waterproofing systems
• Note: Not suitable for roofs permanently exposed to UV radiation

Advantages

• Easy to install by torching method
• Fully bonded application
• Flexible in cold temperatures (≤0°C)
• Good durability and mechanical properties (tensile, tear, shear)
• Can be painted immediately after application
• Insulation panels can be bonded directly without special adhesives or mechanical fixings
• Sand surface ensures excellent bond for overlying layers

Packaging

• 1 roll = 1.0 m wide × 10.0 m long (10 m²)

Colour

• Top surface: Sand
• Bottom surface: Polyethylene film

Product Details

Product Information

Application

Application Information

Application Steps

• Substrate Preparation: Surface must be uniform, firm, smooth, and free from sharp protrusions, grease, laitance, oil, dust, and loose particles. Must be clean and dry.
• Priming: Apply the appropriate Sika® primer at the required consumption onto the prepared dry surface. Allow the primer to dry completely before membrane installation. Contact Sika Technical Service for primer selection guidance.
• Alignment: Unroll the membrane and align it. Re-roll before application. Lay membranes parallel to avoid coinciding joints. When applying over another bituminous membrane, straddle the overlaps of the previous layer.
• Torching: Heat the substrate and the burn-off film on the underside of the membrane with a gas burner. When the backing film starts to melt, roll the membrane forward and press firmly against the substrate. Keep the flame moving to avoid overheating (polyester reinforcement melts at +260°C). A bead of melted bitumen must be visible along the full length of all overlaps.
• Overlaps: Overlap sides by min. 100 mm and ends by min. 150 mm. At end overlaps, cut a 100×100 mm corner at 45°. Weld overlaps until a 10 mm trickle of melted mixture is visible along the overlap line.
• Detailing: Use a sharp knife to cut around internal/external corners, upstands, vent pipes, drains, and support metalwork. Refer to the relevant method statement for detailing guidance.
• Suitable Substrates for Torching: Concrete, perlite screed, bituminous membranes with smooth surface, compatible coatings, brick masonry, cementitious screeds.
• Footwear: Use flat-profile footwear only – spikes or sharp protrusions may puncture the membrane.

Maintenance

• Check the functionality of auxiliary works, flashings, drainage outlets, and overflow pipes regularly.
• Remove leaves, moss, and vegetation that could cause ponding and overload the drainage system.
• Arrange periodic inspections of the membrane and detailing to maintain waterproofing performance throughout its lifespan.

SikaShield® P24 S 3mm

An APP modified bituminous waterproofing membrane reinforced with non-woven polyester fabric. The sand top surface ensures excellent bond for overlying layers. Torch-applied via burn-off film on the underside for a fully bonded installation. Flexible at 0°C and suitable as a base sheet in multi-layer systems under protective layers, tiles, or ballast.

Overview

Specifications

Usage

• Waterproofing membrane for balconies and terraces under heavy protection layers (tiles or gravel)
• Flat and sloping roofs under protective layers or ballast
• Car park decks
• Wet areas
• Basements and below-ground structures
• Horizontal reinforced concrete slabs, decks, podiums, and protrusions
• Vertical reinforced concrete walls
• Base sheet in multi-layer waterproofing systems
• Note: Not suitable for roofs permanently exposed to UV radiation

Advantages

• Easy to install by torching method
• Fully bonded application
• Flexible in cold temperatures (0°C)
• Good durability and mechanical properties (tensile, tear, shear)
• Can be painted immediately after application
• Insulation panels can be bonded directly without special adhesives or mechanical fixings
• Sand surface ensures excellent bond for overlying layers

Packaging

• 1 roll = 1.0 m wide × 10.0 m long (10 m²)

Colour

• Top surface: Sand
• Bottom surface: Polyethylene film

Product Details

Product Information

Application

Application Information

Application Steps

• Substrate Preparation: Surface must be uniform, firm, smooth, and free from sharp protrusions, grease, laitance, oil, dust, and loose particles. Must be clean and dry.
• Priming: Apply the appropriate Sika® primer at the required consumption onto the prepared dry surface. Allow the primer to dry completely before membrane installation. Contact Sika Technical Service for primer selection guidance.
• Alignment: Unroll the membrane and align it. Re-roll before application. Lay membranes parallel to avoid coinciding joints. When applying over another bituminous membrane, straddle the overlaps of the previous layer.
• Torching: Heat the substrate and the burn-off film on the underside of the membrane with a gas burner. When the backing film starts to melt, roll the membrane forward and press firmly against the substrate. Keep the flame moving to avoid overheating (polyester reinforcement melts at +260°C). A bead of melted bitumen must be visible along the full length of all overlaps.
• Overlaps: Overlap sides by min. 100 mm and ends by min. 150 mm. At end overlaps, cut a 100×100 mm corner at 45°. Weld overlaps until a 10 mm trickle of melted mixture is visible along the overlap line.
• Detailing: Use a sharp knife to cut around internal/external corners, upstands, vent pipes, drains, and support metalwork. Refer to the relevant method statement for detailing guidance.
• Suitable Substrates for Torching: Concrete, perlite screed, bituminous membranes with smooth surface, compatible coatings, brick masonry, cementitious screeds.
• Footwear: Use flat-profile footwear only – spikes or sharp protrusions may puncture the membrane.

SikaShield® P24 MG 4.5 kg/m²

An APP modified bituminous roof waterproofing membrane reinforced with non-woven polyester fabric. The mineral granule top surface provides permanent UV resistance and a decorative finish. Torch-applied via burn-off film on the underside for a fully bonded, seamless installation. Flexible at 0°C.

Overview

Specifications

Usage

• Waterproofing membrane for balconies and terraces
• Flat or sloping roofs with up to 15% gradient
• Exposed cap sheet in a multi-layer waterproofing system

Advantages

• Decorative mineral granules – UV resistant for permanent exposure
• Easy to install by torching method
• Fully bonded application
• Flexible in cold temperatures (0°C)
• Good mechanical properties (tensile, tear, shear)
• Can be painted immediately after application
• Tiles can be placed directly onto the membrane

Packaging

• 1 roll = 1.0 m wide × 10.0 m long (10 m²)

Colour

• Top surface: Mineral granules (dark grey to black)
• Bottom surface: Polyethylene film

Product Details

Product Information

Application

Application Information

Application Steps

• Substrate Preparation: Surface must be uniform, firm, smooth, and free from sharp protrusions, grease, laitance, oil, dust, and loose particles. Must be clean and dry.
• Alignment: Unroll the membrane and align it. Re-roll before application. Lay membranes parallel to avoid coinciding joints. When applying over another bituminous membrane, straddle the overlaps of the previous layer.
• Torching: Heat the substrate and the burn-off film on the underside of the membrane with a gas burner. When the backing film starts to melt, roll the membrane forward and press firmly against the substrate. Keep the flame moving to avoid overheating (polyester reinforcement melts at +260°C). A bead of melted bitumen must be visible along the full length of all overlaps.
• Overlaps: Overlap sides by min. 100 mm and ends by min. 150 mm. At end overlaps, cut a 100×100 mm corner at 45°. Weld overlaps until a 10 mm trickle of melted mixture is visible along the overlap line.
• Detailing: Use a sharp knife to cut around internal/external corners, upstands, vent pipes, drains, and support metalwork. Refer to the relevant method statement for detailing guidance.
• Suitable Substrates for Torching: Concrete, perlite screed, bituminous membranes with smooth surface, compatible coatings, brick masonry, cementitious screeds.
• Footwear: Use flat-profile footwear only – spikes or sharp protrusions may puncture the membrane.

Sikafloor® CureHard-24

A high-volume solids, one-part, clear sodium silicate-based liquid hardener and densifier for fresh or hardened concrete. Reduces dust emissions, increases abrasion resistance by 81.5%, and seals concrete surfaces. Odourless and easy to apply. CE marked per EN 1504-2.

Overview

Specifications

Usage

• Hardening and densifying concrete surfaces requiring light to moderate abrasion resistance
• Dust-proofing prefabricated concrete elements
• Horizontal old or new concrete surfaces
• Industrial, commercial, and public buildings – interior and exterior

Advantages

• Reduces dust emissions vs untreated concrete
• 81.5% increase in abrasion resistance vs untreated concrete
• Seals concrete surfaces
• Very good yellowing resistance
• One-part – ready to use
• Easy to apply by spray
• High gloss with regular cleaning
• Odourless
• LEED v4 MR Credit compliant – EPD available
• CE marked per EN 1504-2

Packaging

• 15 L container
• 200 L drum

Colour

• Clear

Product Details

Product Information

Technical Information

Curing & Ready for Use

Application

Application Information

Consumption

• 0.15–0.25 L/m² per coat (4–7 m²/L) on power-trowelled concrete
• A second coat is required on porous, rough-textured, or brush-finished surfaces

Application Steps

• Substrate – Fresh Concrete (≥7 days): Finish using power floating, manual floating, or tamping. Cure for at least 7 days with water spray, blankets, or plastic sheets.
• Substrate – Hardened/Old Concrete: Clean with high-pressure water cleaner. Allow to dry completely. Remove all dust, dirt, and loose material with brush or vacuum.
• Important – Remove Existing Treatments: Completely remove any curing agents, membrane-forming sealers, or asphalt before application.
• Application: Apply in a continuous film using a high-volume, low-pressure spray unit. Do not use sprayers previously used for silicones or release agents. Touch up any dry spots immediately.
• Scrubbing: Scrub material into the surface with a soft bristle broom or floor-scrubbing machine for minimum 30 minutes until the material begins to gel and becomes slippery.
• Reworking: Wet the surface slightly with water spray and rework for another 10–20 minutes.
• Removal of Excess: After ~20 minutes when material returns to a gel, rinse the floor and remove excess with a squeegee, wet vacuum, or mop. Dried residue leaves white stains removable only mechanically.
• Second Coat: Apply on porous or rough surfaces after the first coat is dry and tack-free.
• Before Subsequent Coating: After cure, abrade the surface mechanically (light to heavy shot blasting) before applying any subsequent coating system.
• Hot Weather (>+25°C): Store product in a cool place. Apply additional material to keep surface wet during scrubbing.
• Moisture Protection: Protect treated surface from moisture for at least 3 days after application to prevent efflorescence.