{"product_id":"sikafloor-264-hc-2-part-epoxy-floor-coating-seal-coat","title":"Sikafloor-264 HC 2-Part Epoxy Floor Coating \u0026 Seal Coat","description":"\u003cp\u003eSikafloor-264 HC 2-Part Epoxy Floor Coating \u0026amp; Seal Coat\u003c\/p\u003e\u003cp\u003eA two-part coloured epoxy coating providing a hard-wearing, seamless, low-maintenance floor finish. Use it for a smooth gloss surface or as part of an aggregate-broadcast system for a slip-resistant finish.\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGood chemical and mechanical resistance.\u003c\/li\u003e\n\u003cli\u003eLiquid-proof gloss finish.\u003c\/li\u003e\n\u003cli\u003eEasy application by roller or squeegee.\u003c\/li\u003e\n\u003cli\u003eSlip-resistant finishes possible with the appropriate aggregate grades and system design.\u003c\/li\u003e\n\u003cli\u003eApproximately 100% solids by mass and volume.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Sika\u003c\/li\u003e\n\u003cli\u003eModel: Sikafloor-264 HC\u003c\/li\u003e\n\u003cli\u003eComposition: Two-part epoxy\u003c\/li\u003e\n\u003cli\u003eListed colour options: RAL7035, RAL7040 and RAL7045\u003c\/li\u003e\n\u003cli\u003ePart A: Coloured liquid resin; part B: Transparent liquid hardener\u003c\/li\u003e\n\u003cli\u003eMixing ratio A:B: 79:21 by weight\u003c\/li\u003e\n\u003cli\u003eDensity: Approximately 1.64 kg\/L for A, 1.00 kg\/L for B and 1.40 kg\/L mixed\u003c\/li\u003e\n\u003cli\u003eShelf life: 24 months from production\u003c\/li\u003e\n\u003cli\u003eStorage: Original unopened and undamaged sealed packaging in dry conditions between +18°C and +30°C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRoller coating concrete and cement screeds subject to normal to medium-heavy wear.\u003c\/li\u003e\n\u003cli\u003eStorage and assembly halls, maintenance workshops, garages and loading ramps.\u003c\/li\u003e\n\u003cli\u003eSeal coats for broadcast systems in multistorey and underground car parks and maintenance hangars.\u003c\/li\u003e\n\u003cli\u003eWet-process areas, including beverage and food-industry facilities, within the specified flooring system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDirect UV exposure from sun, lamps or skylights may cause discolouration or colour deviation. Sika states this does not affect coating function and performance. A smooth gloss coating is not automatically slip-resistant; select the appropriate aggregate-based system.\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eHow to Use\u003c\/strong\u003e\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003eConfirm the prepared substrate's moisture content, air humidity and dew point. Substrate moisture must be below 4% by weight with no rising moisture. If it exceeds 4%, assess the specified Sikafloor EpoCem temporary-moisture-barrier system.\u003c\/li\u003e\n\u003cli\u003eApply at air and substrate temperatures of +10°C to +30°C and no more than 80% relative humidity. Keep the substrate and uncured floor at least 3°C above the dew point.\u003c\/li\u003e\n\u003cli\u003eStir part A mechanically. Add all of part B at the specified 79:21 ratio by weight and mix for 3 minutes using a low-speed stirrer at 300–400 rpm. Transfer to a clean container and remix until consistent. Avoid overmixing and air entrainment.\u003c\/li\u003e\n\u003cli\u003ePrime with the specified Sikafloor-161 HC or Sikafloor-160 HC system to achieve a continuous, pore-free surface. Apply a second priming coat if necessary. Level rough surfaces first with an appropriate levelling mortar.\u003c\/li\u003e\n\u003cli\u003eApply roller coatings crosswise with a short-pile roller. Apply seal coats with a squeegee followed by crosswise back-rolling. Follow the selected smooth, textured or broadcast system build-up.\u003c\/li\u003e\n\u003cli\u003eObserve the relevant primer-to-coating and coating-to-coating waiting windows before subsequent layers.\u003c\/li\u003e\n\u003cli\u003eClean tools immediately with Thinner C. Hardened material requires mechanical removal.\u003c\/li\u003e\n\u003cli\u003eRemove floor spillages immediately and clean regularly with suitable equipment and detergents to maintain appearance.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003e\u003cstrong\u003eWhat's in the Box\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003eA two-part Sikafloor-264 HC unit in the selected colour. Sika lists 20kg sets comprising 15.8kg A and 4.2kg B, and 10kg sets comprising 7.9kg A and 2.1kg B. This listing's colour options do not identify the supplied pack size, so confirm the unit size before ordering. Primers, quartz sand, Extender T and application tools are not listed as included.\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eShore D hardness: Approximately 76 after 7 days at +23°C, DIN 53505.\u003c\/li\u003e\n\u003cli\u003eAbrasion resistance: 41mg, CS10\/1000\/1000, after 7 days at +23°C, DIN 53109.\u003c\/li\u003e\n\u003cli\u003eCompressive strength: Approximately 53 N\/mm²; flexural strength: Approximately 20 N\/mm². Both tested after 28 days at +23°C with resin filled 1:0.9 with F36, EN 196-1.\u003c\/li\u003e\n\u003cli\u003eTensile adhesion: Greater than 1.5 N\/mm² with concrete failure, ISO 4624.\u003c\/li\u003e\n\u003cli\u003eChemical resistance: Obtain Sika's specific resistance information for the intended exposure.\u003c\/li\u003e\n\u003cli\u003eDry-heat resistance: +50°C permanent; +80°C for up to 7 days; +100°C for up to 12 hours. Occasional moist or wet heat up to +80°C is listed. Confirm all exposure conditions against the current Product Data Sheet.\u003c\/li\u003e\n\u003cli\u003ePot life: Approximately 50 minutes at +10°C, 25 minutes at +20°C and 15 minutes at +30°C.\u003c\/li\u003e\n\u003cli\u003eOver Sikafloor-161 HC: wait 24 hours–3 days at +10°C, 12 hours–2 days at +20°C, or 8–24 hours at +30°C.\u003c\/li\u003e\n\u003cli\u003eOver Sikafloor-264 HC: wait 30 hours–3 days at +10°C, 24 hours–2 days at +20°C, or 16–24 hours at +30°C.\u003c\/li\u003e\n\u003cli\u003eFoot traffic\/light traffic\/full cure: approximately 72 hours\/6 days\/10 days at +10°C; 24 hours\/4 days\/7 days at +20°C; 18 hours\/2 days\/5 days at +30°C.\u003c\/li\u003e\n\u003cli\u003eSmooth roller system: 1–2 coats Sikafloor-161 HC at 0.35–0.55 kg\/m² per coat, followed by 2 coats Sikafloor-264 HC at 0.3–0.5 kg\/m² per coat.\u003c\/li\u003e\n\u003cli\u003eTextured roller system: the same primer build-up, followed by 1–2 coats Sikafloor-264 HC with 1% Extender T by weight at 0.5–0.8 kg\/m² per coat.\u003c\/li\u003e\n\u003cli\u003eApproximately 4mm broadcast system: primer at 0.35–0.5 kg\/m²; wearing course of 1 part Sikafloor-264 HC to 1 part 0.1–0.3mm quartz sand by weight at approximately 4 kg\/m² combined; broadcast 0.4–0.7mm quartz sand at approximately 4–6 kg\/m²; finish with 1–2 coats Sikafloor-264 HC at 0.6–0.8 kg\/m² per coat.\u003c\/li\u003e\n\u003cli\u003eConsumption is theoretical and excludes porosity, profile, level variations and wastage. Working and curing times vary with site conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e\u003cstrong\u003eCertificates\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSika states conformity with LEED v4 EQ low-emitting-material requirements, not LEED product certification.\u003c\/li\u003e\n\u003cli\u003eVOC content: passes LEED v4.1 content requirements, Eurofins report 392-2022-10179006_XG_EN, June 2022.\u003c\/li\u003e\n\u003cli\u003eVOC emissions: passes CDPH, Eurofins report 392-2022-00179003_H_EN, May 2022.\u003c\/li\u003e\n\u003cli\u003eThe reference also lists biological-resistance testing for Sikafloor-264 to ISO 846, CSM report 1008-533, May 2011. Confirm applicability to the supplied HC product before relying on this report.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"RAL7035","offer_id":42519585816661,"sku":null,"price":245.0,"currency_code":"USD","in_stock":true},{"title":"RAL7040","offer_id":42519585849429,"sku":null,"price":245.0,"currency_code":"USD","in_stock":true},{"title":"RAL7045","offer_id":42519585882197,"sku":null,"price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sikafloor_-264_HC.png?v=1779346349","url":"https:\/\/esemall.com\/products\/sikafloor-264-hc-2-part-epoxy-floor-coating-seal-coat","provider":"ESE Mall Construction Hub","version":"1.0","type":"link"}