{"product_id":"sikadur-732-2-part-epoxy-resin-bonding-agent-5kg","title":"Sikadur-732 2-Part Epoxy Resin Bonding Agent 5kg","description":"\u003cp\u003eSikadur-732 2-Part Epoxy Resin Bonding Agent 5kg\u003c\/p\u003e\u003cp\u003eA solvent-free, thixotropic, two-component structural epoxy resin adhesive for bonding fresh concrete to hardened concrete and steel. Its high early and final strength supports structural bonding across a range of construction materials.\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh-strength bonding and excellent adhesion to most structural materials.\u003c\/li\u003e\n\u003cli\u003eHigh early and final strength.\u003c\/li\u003e\n\u003cli\u003eSolvent-free epoxy formulation.\u003c\/li\u003e\n\u003cli\u003eThixotropic consistency.\u003c\/li\u003e\n\u003cli\u003eHighly effective on dry surfaces; the manufacturer's preparation guidance also permits damp surfaces without standing water.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Sika\u003c\/li\u003e\n\u003cli\u003eModel: Sikadur-732\u003c\/li\u003e\n\u003cli\u003eType: Two-component epoxy resin bonding agent\u003c\/li\u003e\n\u003cli\u003ePackaging: 5kg set, components A and B\u003c\/li\u003e\n\u003cli\u003eMixed colour: Concrete grey\u003c\/li\u003e\n\u003cli\u003eDensity: Approximately 1.45 kg\/L\u003c\/li\u003e\n\u003cli\u003eMixing ratio A:B: 2:1 by weight or volume\u003c\/li\u003e\n\u003cli\u003ePot life: 35 minutes at +30°C\u003c\/li\u003e\n\u003cli\u003eShelf life: 24 months from production\u003c\/li\u003e\n\u003cli\u003eStorage: Original unopened, sealed and undamaged packaging in dry conditions between +15°C and +30°C, protected from direct sunlight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBonding fresh, plastic concrete to hardened concrete and steel.\u003c\/li\u003e\n\u003cli\u003eGrouting bolts, dowels and pins.\u003c\/li\u003e\n\u003cli\u003eStructural bonding of concrete, masonry, metal and wood.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm project-specific preparation, bonding, grouting and loading requirements against the current Product Data Sheet before use.\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eHow to Use\u003c\/strong\u003e\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003eEnsure the substrate is clean and sound. It may be dry or damp but must be free from standing water.\u003c\/li\u003e\n\u003cli\u003eRemove dust, laitance, grease, curing compounds, impregnations, waxes, foreign particles and disintegrated material. Prepare concrete by sandblasting or another approved mechanical method. Prepare steel by sandblasting to the manufacturer's specified white-metal finish.\u003c\/li\u003e\n\u003cli\u003ePre-mix each component separately. Measure 2 parts component A to 1 part component B into a clean pail, by weight or volume.\u003c\/li\u003e\n\u003cli\u003eMix thoroughly for 3 minutes with a paddle and low-speed drill at 400–600 rpm until uniformly coloured. Mix only what can be used within the pot life.\u003c\/li\u003e\n\u003cli\u003eApply evenly to the prepared substrate. The existing listing specifies brush, roller or trowel application and placement of fresh concrete while the adhesive remains wet and tacky. Confirm the permitted placement window and detailed procedure in the current Product Data Sheet.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the pot life or add solvents or thinners. Follow the applicable manufacturer instructions for grouting and protection during curing.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003e\u003cstrong\u003eWhat's in the Box\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003eOne 5kg Sikadur-732 set containing component A and component B. Mixing equipment and application tools are not listed as included.\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConsumption: Approximately 0.3–0.8 kg\/m² depending on substrate condition.\u003c\/li\u003e\n\u003cli\u003eCompressive strength: Approximately 60 N\/mm² after 7 days and 63 N\/mm² after 28 days.\u003c\/li\u003e\n\u003cli\u003eFlexural tensile strength: Approximately 39 N\/mm² after 28 days.\u003c\/li\u003e\n\u003cli\u003eTensile adhesion to mechanically prepared K400 concrete: Approximately 2 N\/mm² after 28 days, with concrete failure.\u003c\/li\u003e\n\u003cli\u003eTensile adhesion to steel blast-cleaned to SA 2½: Approximately 12 N\/mm² after 28 days. This identifies the surface condition of the adhesion test.\u003c\/li\u003e\n\u003cli\u003eCoefficient of thermal expansion: 50 × 10⁻⁶ per °C over −20°C to +40°C. This test interval is not a general application- or service-temperature rating.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":42519918968917,"sku":"Sikadur-732","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sikadur-732.png?v=1786707365","url":"https:\/\/esemall.com\/products\/sikadur-732-2-part-epoxy-resin-bonding-agent-5kg","provider":"ESE Mall Construction Hub","version":"1.0","type":"link"}