{"product_id":"sikaceram-99-floor-wall-kh-cementitious-tile-adhesive-20kg","title":"SikaCeram-99 Floor \u0026 Wall KH Cementitious Tile Adhesive 20kg","description":"\u003cp\u003eSikaCeram-99 Floor \u0026amp; Wall KH Cementitious Tile Adhesive 20kg\u003c\/p\u003e\u003cp\u003eA prepacked cementitious adhesive for installing ceramic, porcelain and homogeneous tiles on floors and walls. Suitable for thin- or thick-bed tiling in interior and exterior applications, it offers consistent workability and approximately 20 minutes to adjust tiles after placement.\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConsistent quality and good workability.\u003c\/li\u003e\n\u003cli\u003eGood adhesion to common substrates including concrete, cementitious mortar, stone and bricks.\u003c\/li\u003e\n\u003cli\u003eTiles can be adjusted for approximately 20 minutes after application.\u003c\/li\u003e\n\u003cli\u003eNo tile pre-soaking required.\u003c\/li\u003e\n\u003cli\u003eCan be used with SikaLatex to increase adhesive performance.\u003c\/li\u003e\n\u003cli\u003eSuitable for interior and exterior floor and wall tiling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Sika\u003c\/li\u003e\n\u003cli\u003eModel: SikaCeram-99 Floor \u0026amp; Wall KH\u003c\/li\u003e\n\u003cli\u003eType: Prepacked cementitious tile adhesive\u003c\/li\u003e\n\u003cli\u003ePackaging: 20kg bag\u003c\/li\u003e\n\u003cli\u003eColour: Grey powder, as identified in the existing listing\u003c\/li\u003e\n\u003cli\u003eMixing water: Approximately 4.0–4.6L per 20kg bag\u003c\/li\u003e\n\u003cli\u003eBulk powder density: 1.49 kg\/L\u003c\/li\u003e\n\u003cli\u003ePot life: Approximately 60 minutes at +27°C and 65% relative humidity\u003c\/li\u003e\n\u003cli\u003eAdjustability: Approximately 20 minutes\u003c\/li\u003e\n\u003cli\u003eShelf life: Minimum 9 months when properly stored in unopened original packaging\u003c\/li\u003e\n\u003cli\u003eStorage: Dry, cool and shaded place in undamaged, unopened original packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInstalling ceramic, porcelain, homogeneous and absorbing tiles.\u003c\/li\u003e\n\u003cli\u003eFloor and wall tiling using thin- or thick-bed application.\u003c\/li\u003e\n\u003cli\u003eInterior and exterior use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSika recommends mixing with SikaLatex for better exterior adhesion. Follow the applicable SikaLatex and adhesive instructions for the mixing procedure; the reference does not provide a latex dosage.\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eHow to Use\u003c\/strong\u003e\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003eEnsure concrete is clean, sound, level and free from oil and grease. Remove cement laitance, formwork traces and loosely adhering particles by suitable preparation such as sandblasting or high-pressure water jetting.\u003c\/li\u003e\n\u003cli\u003ePre-wet absorbent substrates to a saturated-surface-dry condition.\u003c\/li\u003e\n\u003cli\u003eAdd the powder to approximately 4.0–4.6L of clean water per 20kg bag. Mix for 3–5 minutes using a handheld or mechanical mixer until homogeneous and lump-free.\u003c\/li\u003e\n\u003cli\u003eAllow the mixture to stand for 1–2 minutes, then remix thoroughly for another minute.\u003c\/li\u003e\n\u003cli\u003eApply with a notched trowel. Back-butter tiles for improved contact and coverage, particularly tiles larger than 30 × 30cm or tiles with deep grooves. Ensure adhesive fills the grooves.\u003c\/li\u003e\n\u003cli\u003ePress tiles firmly onto the substrate and immediately tamp into position. Complete adjustments within approximately 20 minutes and ensure proper adhesive contact with the substrate.\u003c\/li\u003e\n\u003cli\u003eFollow Sika's stated curing guidance: walls after 7–8 hours depending on temperature, floors after 24 hours, and full traffic after 14 days. Confirm the intended subsequent wall or floor operation before proceeding.\u003c\/li\u003e\n\u003cli\u003eClean unhardened material from tools with water. Hardened material can only be removed mechanically.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003e\u003cstrong\u003eWhat's in the Box\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003eOne 20kg bag of SikaCeram-99 Floor \u0026amp; Wall KH. SikaLatex, tiles, grout, mixing equipment and application tools are not listed as included.\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer-listed tensile strength: ≥0.5 N\/mm² on a prepared, dampened concrete surface, ISO 13007-2:2005 and TCVN 7899-2:2008.\u003c\/li\u003e\n\u003cli\u003eSubstrate temperature during application: +8°C to +40°C.\u003c\/li\u003e\n\u003cli\u003eIndicative coverage: Approximately 5.6–6.4m² per 20kg bag at 2mm mortar thickness.\u003c\/li\u003e\n\u003cli\u003eActual consumption depends on substrate profile and roughness, tile size, joints and application technique, including any back-buttering.\u003c\/li\u003e\n\u003cli\u003eWorking and curing times depend on site conditions. Pot life is stated at +27°C and 65% relative humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":42517327315029,"sku":"SikaCeram-99-KH","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/SikaCeram-99_Floor_Wall_KH.png?v=1786957686","url":"https:\/\/esemall.com\/products\/sikaceram-99-floor-wall-kh-cementitious-tile-adhesive-20kg","provider":"ESE Mall Construction Hub","version":"1.0","type":"link"}