{"title":"Waterproofing","description":"\u003ch2\u003eWaterproofing\u003c\/h2\u003e\u003cp\u003eProtect your structures from water damage with our range of professional waterproofing products. Designed for roofs, foundations, bathrooms, balconies, and below-grade applications across residential, commercial, and industrial construction projects in Cambodia.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eWaterproofing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse Case\u003c\/th\u003e\n\u003ctd\u003eRoof sealing, Foundation protection, Wet area waterproofing, Joint sealing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Types\u003c\/th\u003e\n\u003ctd\u003eWaterproofing membranes, Sealants, Coatings, Primers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eConcrete, Masonry, Metal roofs, Tile substrates, Timber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWaterproofing membranes and coatings for roofs, terraces, balconies, and foundations\u003c\/li\u003e\n\u003cli\u003eFlexible sealants and joint fillers for expansion joints, cracks, and penetrations\u003c\/li\u003e\n\u003cli\u003ePrimers and bonding agents to ensure adhesion on concrete and masonry substrates\u003c\/li\u003e\n\u003cli\u003eSuitable for both positive and negative side waterproofing applications\u003c\/li\u003e\n\u003cli\u003eUV and weather-resistant formulations for long-term outdoor performance\u003c\/li\u003e\n\u003cli\u003eAvailable in brush-applied, roll-applied, and spray-applied systems for versatile installation\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"sikatop-107-seal","title":"SikaTop-107 Seal","description":"\u003ch2\u003eSikaTop-107 Seal\u003c\/h2\u003e\n\u003cp\u003eA two-component polymer-modified cementitious waterproof mortar slurry for interior and exterior waterproofing and damp-proofing. Approved for potable water contact and suitable for wet rooms, swimming pools, and basement applications.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSika\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eTwo-component cementitious waterproof mortar slurry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixing Ratio (A:B)\u003c\/td\u003e\n\u003ctd\u003e1:4 by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Thickness\u003c\/td\u003e\n\u003ctd\u003e0.75 mm min \/ 2 mm max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePot Life\u003c\/td\u003e\n\u003ctd\u003e~30 minutes at +20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive Strength (28d)\u003c\/td\u003e\n\u003ctd\u003e30 MPa (ASTM C109)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater Absorption (28d)\u003c\/td\u003e\n\u003ctd\u003e2.6% (ASTM C121-90)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFresh Mortar Density\u003c\/td\u003e\n\u003ctd\u003e~2.00 kg\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e6 months (unopened original packaging)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eDry, away from sunlight, +5°C to +30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e25 kg\/set (5 kg Part A pail + 20 kg Part B bag)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour (mixed)\u003c\/td\u003e\n\u003ctd\u003eCement grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApproved for potable water contact\u003c\/li\u003e\n\u003cli\u003eProtects against water penetration and carbonation\u003c\/li\u003e\n\u003cli\u003eEasy to apply by brush, trowel, or spray\u003c\/li\u003e\n\u003cli\u003eNo water required – pre-batched components\u003c\/li\u003e\n\u003cli\u003eVery good adhesion to concrete, cementitious rendering, brickwork, and blockwork\u003c\/li\u003e\n\u003cli\u003eNon-corrosive to steel or iron\u003c\/li\u003e\n\u003cli\u003eSuitable for wet rooms, swimming pools, basements, and pore\/blowhole filling\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":42517308047445,"sku":null,"price":36.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/SikaTop-107_Seal.png?v=1786957775"},{"product_id":"sika-igolflex-r","title":"Sika Igolflex R","description":"\u003ch2\u003eSika Igolflex R\u003c\/h2\u003e\n\u003cp\u003eA solvent-free, flexible thick-film coating based on rubber bitumen emulsion with a pasty consistency. Ready-to-use with no mixing or heating required. Protects concrete surfaces against salty groundwater and mild soil acids.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSika\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSolvent-free rubber\/bitumen emulsion coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e0.96–1.20 kg\/L at +30°C (ASTM D1475)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolid Content\u003c\/td\u003e\n\u003ctd\u003e≥55% by weight (ASTM D2939)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTack Free Time\u003c\/td\u003e\n\u003ctd\u003e½–1 hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOvercoating Time\u003c\/td\u003e\n\u003ctd\u003e6–12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinal Cure\u003c\/td\u003e\n\u003ctd\u003e2–4 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e9 months from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eDry, +5°C to +30°C, away from direct sunlight and frost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e20 kg pail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for dry and damp surfaces\u003c\/li\u003e\n\u003cli\u003eEasy to apply – ready-to-use, no mixing or heating\u003c\/li\u003e\n\u003cli\u003eNon-sag on vertical surfaces\u003c\/li\u003e\n\u003cli\u003eGood weather resistance and ageing properties\u003c\/li\u003e\n\u003cli\u003eBridges shrinkage and hairline cracks\u003c\/li\u003e\n\u003cli\u003ePermanently plasto-elastic, even at low temperatures\u003c\/li\u003e\n\u003cli\u003eOdourless and fungus resistant\u003c\/li\u003e\n\u003cli\u003eGood resistance to mild soil acids and salts\u003c\/li\u003e\n\u003cli\u003eSuitable for basements, retaining walls, and settlement tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":42517428338773,"sku":null,"price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sika_Igolflex_R.jpg?v=1786956762"},{"product_id":"sikalastic-110","title":"Sikalastic-110","description":"\u003ch2\u003eSikalastic-110\u003c\/h2\u003e\n\u003cp\u003eA water-based, one-part modified polyurethane\/bituminous coating that forms a highly elastic, seamless, and crack-bridging waterproofing membrane. Easy to apply by roller, brush, or airless spray on horizontal, vertical, and overhead surfaces.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSika\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e1-part water-based polyurethane\/bituminous coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +40°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubstrate Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +40°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003eMax. 80% r.h.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubstrate Moisture\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;6% pbw (no rising moisture per ASTM D4263)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCuring Time\u003c\/td\u003e\n\u003ctd\u003eMin. 48 hours to full cure at +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWaiting Time Between Coats\u003c\/td\u003e\n\u003ctd\u003e4–5 hours (min) \/ 2 days (max) at +30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e20 kg pail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh elasticity and crack-bridging capability\u003c\/li\u003e\n\u003cli\u003eEasy application by roller, brush, or airless spray – including vertical walls and ceilings\u003c\/li\u003e\n\u003cli\u003eSeamless, fully bonded waterproofing membrane\u003c\/li\u003e\n\u003cli\u003eOne-part – no mixing required (except dilution for primer coat)\u003c\/li\u003e\n\u003cli\u003eCan be overlaid with cementitious screed after 48 hours\u003c\/li\u003e\n\u003cli\u003eSuitable for roofs, terraces, balconies, basements, retaining walls, and wet rooms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":42517448130645,"sku":null,"price":161.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sikalastic-110.png?v=1786956081"},{"product_id":"sikalastic-590","title":"Sikalastic-590","description":"\u003ch2\u003eSikalastic-590\u003c\/h2\u003e\n\u003cp\u003eA one-component polyurethane-acrylic dispersion waterproofing coating with improved water ponding resistance, excellent UV resistance, and high crack-bridging capacity. Suitable for new construction and refurbishment roofing projects. Available in Grey and Cool White.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSika\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e1-component polyurethane-acrylic dispersion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.32 kg\/L at +30°C (EN ISO 2811-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolid Content\u003c\/td\u003e\n\u003ctd\u003e~63% by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength\u003c\/td\u003e\n\u003ctd\u003e~1.7 N\/mm² (free film, \u0026gt;7 days)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolar Reflectance (White)\u003c\/td\u003e\n\u003ctd\u003e~80%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Resistance\u003c\/td\u003e\n\u003ctd\u003ePass – 1000 hours UVA-340 (ASTM G154)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e12 months from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eDry, +5°C to +30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e4 kg pail, 20 kg pail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGrey, Cool White (solar reflective)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGood behaviour under limited water ponding\u003c\/li\u003e\n\u003cli\u003eUV resistant – no yellowing or weathering\u003c\/li\u003e\n\u003cli\u003eHighly elastic and crack-bridging\u003c\/li\u003e\n\u003cli\u003eNon-toxic, VOC compliant, water-based\u003c\/li\u003e\n\u003cli\u003eOne component – ready to use\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion on porous and non-porous substrates\u003c\/li\u003e\n\u003cli\u003eSeamless waterproofing membrane\u003c\/li\u003e\n\u003cli\u003eWater vapour permeable\u003c\/li\u003e\n\u003cli\u003eCool White variant offers ~80% solar reflectance for energy efficiency\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Gray \/ 4kg","offer_id":42517476802645,"sku":null,"price":28.5,"currency_code":"USD","in_stock":true},{"title":"Gray \/ 20kg","offer_id":42517479325781,"sku":null,"price":161.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ 4kg","offer_id":42517476835413,"sku":null,"price":28.5,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ 20kg","offer_id":42517479358549,"sku":null,"price":161.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sikalastic-590.png?v=1786955982"},{"product_id":"sika-raintite","title":"Sika RainTite","description":"\u003ch2\u003eSika RainTite\u003c\/h2\u003e\n\u003cp\u003eA thixotropic, cold-applied, elastic waterproofing coating based on polymer-modified acrylates. Forms a seamless, joint-free, flexible membrane that is UV and weather resistant. Ideal for roofs, parapet walls, external walls, and corroded corrugated metal sheets. No priming required on most surfaces.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSika\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePolymer-modified acrylic thixotropic waterproofing coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying Time\u003c\/td\u003e\n\u003ctd\u003e2–3 hours (depending on ambient conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd\u003eMax. +35°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubstrate Temperature\u003c\/td\u003e\n\u003ctd\u003eMax. +35°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e12 months from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eDry, +5°C to +30°C, away from direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e4 kg pail, 20 kg pail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eTransparent, White, Ivory, Grey, Stone Grey, Meadow Green, Coffee Cream, Coro Red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal weather and UV resistant\u003c\/li\u003e\n\u003cli\u003eEasy to apply by brush or roller\u003c\/li\u003e\n\u003cli\u003eNo priming required on most surfaces\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to most surfaces\u003c\/li\u003e\n\u003cli\u003eHigh flexibility and thixotropic consistency\u003c\/li\u003e\n\u003cli\u003eNon-toxic and will not promote fungal growth\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete roofs, parapet walls, external walls, and corroded corrugated metal sheets\u003c\/li\u003e\n\u003cli\u003eAvailable in 8 colours for decorative finish applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Gray \/ 4kg","offer_id":42517504032853,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true},{"title":"Gray \/ 20kg","offer_id":42517504065621,"sku":null,"price":92.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 4kg","offer_id":42517504098389,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 20kg","offer_id":42517504131157,"sku":null,"price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sika_RainTite.jpg?v=1786955865"},{"product_id":"sikashield®-p24-mg-4-5-kg-m","title":"Sika SikaShield P24 MG 4.5kg\/m²","description":"\u003ch2\u003eSikaShield P24 MG 4.5 kg\/m²\u003c\/h2\u003e\n\u003cp\u003eSikaShield P24 MG is an APP modified bituminous roof waterproofing membrane by Sika, reinforced with non-woven polyester fabric. The mineral granule top surface provides permanent UV resistance and a decorative finish, torch-applied via burn-off film for a fully bonded, seamless installation.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSika\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAPP modified bituminous waterproofing membrane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReinforcement\u003c\/td\u003e\n\u003ctd\u003eNon-woven polyester fabric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMass per Unit Area\u003c\/td\u003e\n\u003ctd\u003e4.5 kg\/m² ±5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoll Size\u003c\/td\u003e\n\u003ctd\u003e1.0 m × 10.0 m (10 m² per roll)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop Surface\u003c\/td\u003e\n\u003ctd\u003eMineral granules (dark grey to black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Surface\u003c\/td\u003e\n\u003ctd\u003ePolyethylene burn-off film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexibility\u003c\/td\u003e\n\u003ctd\u003eFlexible at 0°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +40°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide Overlap\u003c\/td\u003e\n\u003ctd\u003eMin. 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Overlap\u003c\/td\u003e\n\u003ctd\u003eMin. 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e12 months from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eDry, +5°C to +35°C, vertical position, original packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDecorative mineral granules — UV resistant for permanent outdoor exposure\u003c\/li\u003e\n\u003cli\u003eTorch-applied via burn-off film for easy, fully bonded installation\u003c\/li\u003e\n\u003cli\u003eFlexible at 0°C — suitable for varying temperature conditions\u003c\/li\u003e\n\u003cli\u003eGood mechanical properties: tensile, tear, and shear resistance\u003c\/li\u003e\n\u003cli\u003eCan be painted immediately after application\u003c\/li\u003e\n\u003cli\u003eTiles can be placed directly onto the membrane\u003c\/li\u003e\n\u003cli\u003eSuitable for flat or sloping roofs (up to 15% gradient), balconies, and terraces\u003c\/li\u003e\n\u003cli\u003eUse as exposed cap sheet in a multi-layer waterproofing system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Preparation:\u003c\/strong\u003e Surface must be uniform, firm, smooth, and free from sharp protrusions, grease, laitance, oil, dust, and loose particles. Must be clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlignment:\u003c\/strong\u003e Unroll and align the membrane, then re-roll before application. Lay membranes parallel to avoid coinciding joints. When applying over another bituminous membrane, straddle the overlaps of the previous layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorching:\u003c\/strong\u003e Heat the substrate and the burn-off film with a gas burner. When the backing film starts to melt, roll the membrane forward and press firmly. Keep the flame moving to avoid overheating (polyester reinforcement melts at +260°C). A bead of melted bitumen must be visible along all overlaps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverlaps:\u003c\/strong\u003e Overlap sides by min. 100 mm and ends by min. 150 mm. At end overlaps, cut a 100×100 mm corner at 45°. Weld until a 10 mm trickle of melted mixture is visible along the overlap line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetailing:\u003c\/strong\u003e Use a sharp knife to cut around corners, upstands, vent pipes, drains, and support metalwork. Use flat-profile footwear only — spikes may puncture the membrane.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":42519636344917,"sku":null,"price":65.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sika_SikaShield_P24_MG_4.5kg_m.png?v=1786762157"},{"product_id":"sikashield®-p24-s-3mm","title":"Sika SikaShield P24 S 3mm","description":"\u003ch2\u003eSikaShield® P24 S 3mm\u003c\/h2\u003e\u003cp\u003eAn APP modified bituminous waterproofing membrane reinforced with non-woven polyester fabric. The sand top surface ensures excellent bond for overlying layers. Torch-applied via burn-off film on the underside for a fully bonded installation. Flexible at 0°C and suitable as a base sheet in multi-layer systems under protective layers, tiles, or ballast.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAPP modified bituminous waterproofing membrane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReinforcement\u003c\/td\u003e\n\u003ctd\u003eNon-woven polyester fabric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective Thickness\u003c\/td\u003e\n\u003ctd\u003e3.0 mm ±0.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoll Width\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoll Length\u003c\/td\u003e\n\u003ctd\u003e10.0 m (10 m² per roll)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop Surface\u003c\/td\u003e\n\u003ctd\u003eSand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Surface\u003c\/td\u003e\n\u003ctd\u003ePolyethylene burn-off film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexibility\u003c\/td\u003e\n\u003ctd\u003eFlexible at 0°C (EN 1109)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater Tightness\u003c\/td\u003e\n\u003ctd\u003ePass – Method B: 24 hours at 60 kPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear Resistance (nail shank)\u003c\/td\u003e\n\u003ctd\u003e150 N ±45 N (longitudinal and transversal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoint Shear Resistance (longitudinal)\u003c\/td\u003e\n\u003ctd\u003e500 N\/50 mm ±100 N\/50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoint Shear Resistance (transversal)\u003c\/td\u003e\n\u003ctd\u003e350 N\/50 mm ±70 N\/50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +40°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003eMax. 80%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e12 months from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eDry, +5°C to +35°C, vertical position, original packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eUsage\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWaterproofing membrane for balconies and terraces under heavy protection layers (tiles or gravel)\u003c\/li\u003e\n\u003cli\u003eFlat and sloping roofs under protective layers or ballast\u003c\/li\u003e\n\u003cli\u003eCar park decks\u003c\/li\u003e\n\u003cli\u003eWet areas\u003c\/li\u003e\n\u003cli\u003eBasements and below-ground structures\u003c\/li\u003e\n\u003cli\u003eHorizontal reinforced concrete slabs, decks, podiums, and protrusions\u003c\/li\u003e\n\u003cli\u003eVertical reinforced concrete walls\u003c\/li\u003e\n\u003cli\u003eBase sheet in multi-layer waterproofing systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Not suitable for roofs permanently exposed to UV radiation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEasy to install by torching method\u003c\/li\u003e\n\u003cli\u003eFully bonded application\u003c\/li\u003e\n\u003cli\u003eFlexible in cold temperatures (0°C)\u003c\/li\u003e\n\u003cli\u003eGood durability and mechanical properties (tensile, tear, shear)\u003c\/li\u003e\n\u003cli\u003eCan be painted immediately after application\u003c\/li\u003e\n\u003cli\u003eInsulation panels can be bonded directly without special adhesives or mechanical fixings\u003c\/li\u003e\n\u003cli\u003eSand surface ensures excellent bond for overlying layers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePackaging\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 roll = 1.0 m wide × 10.0 m long (10 m²)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eColour\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTop surface: Sand\u003c\/li\u003e\n\u003cli\u003eBottom surface: Polyethylene film\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003eAPP modified bitumen with non-woven polyester fabric reinforcement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective Thickness\u003c\/td\u003e\n\u003ctd\u003e3.0 mm ±0.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e12 months from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Conditions\u003c\/td\u003e\n\u003ctd\u003eDry, +5°C to +35°C, stored vertically, do not stack pallets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +40°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubstrate Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +40°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003eMax. 80%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide Overlap\u003c\/td\u003e\n\u003ctd\u003eMin. 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Overlap\u003c\/td\u003e\n\u003ctd\u003eMin. 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eApplication Steps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Preparation:\u003c\/strong\u003e Surface must be uniform, firm, smooth, and free from sharp protrusions, grease, laitance, oil, dust, and loose particles. Must be clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePriming:\u003c\/strong\u003e Apply the appropriate Sika® primer at the required consumption onto the prepared dry surface. Allow the primer to dry completely before membrane installation. Contact Sika Technical Service for primer selection guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlignment:\u003c\/strong\u003e Unroll the membrane and align it. Re-roll before application. Lay membranes parallel to avoid coinciding joints. When applying over another bituminous membrane, straddle the overlaps of the previous layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorching:\u003c\/strong\u003e Heat the substrate and the burn-off film on the underside of the membrane with a gas burner. When the backing film starts to melt, roll the membrane forward and press firmly against the substrate. Keep the flame moving to avoid overheating (polyester reinforcement melts at +260°C). A bead of melted bitumen must be visible along the full length of all overlaps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverlaps:\u003c\/strong\u003e Overlap sides by min. 100 mm and ends by min. 150 mm. At end overlaps, cut a 100×100 mm corner at 45°. Weld overlaps until a 10 mm trickle of melted mixture is visible along the overlap line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetailing:\u003c\/strong\u003e Use a sharp knife to cut around internal\/external corners, upstands, vent pipes, drains, and support metalwork. Refer to the relevant method statement for detailing guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable Substrates for Torching:\u003c\/strong\u003e Concrete, perlite screed, bituminous membranes with smooth surface, compatible coatings, brick masonry, cementitious screeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootwear:\u003c\/strong\u003e Use flat-profile footwear only – spikes or sharp protrusions may puncture the membrane.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":42519638736981,"sku":null,"price":58.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sika_SikaShield_P24_S_3mm.png?v=1786762083"},{"product_id":"sikashield®-p24-s-4mm","title":"Sika SikaShield P24 S 4mm","description":"\u003ch2\u003eSikaShield® P24 S 4mm\u003c\/h2\u003e\u003cp\u003eAn APP modified bituminous waterproofing membrane reinforced with non-woven polyester fabric. The sand top surface ensures excellent bond for overlying layers. Torch-applied via burn-off film on the underside for a fully bonded installation. Flexible at 0°C and suitable as a base sheet in multi-layer systems under protective layers, tiles, or ballast.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAPP modified bituminous waterproofing membrane\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReinforcement\u003c\/td\u003e\n\u003ctd\u003eNon-woven polyester fabric\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective Thickness\u003c\/td\u003e\n\u003ctd\u003e4.0 mm ±0.2 mm\u003c\/td\u003e\n\u003ctd\u003eEN 1849-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoll Width\u003c\/td\u003e\n\u003ctd\u003e1.0 m\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoll Length\u003c\/td\u003e\n\u003ctd\u003e10.0 m (10 m² per roll)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop Surface\u003c\/td\u003e\n\u003ctd\u003eSand\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Surface\u003c\/td\u003e\n\u003ctd\u003ePolyethylene burn-off film\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexibility at Low Temperature\u003c\/td\u003e\n\u003ctd\u003e≤0°C\u003c\/td\u003e\n\u003ctd\u003eEN 1109\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear Resistance (nail shank)\u003c\/td\u003e\n\u003ctd\u003e150 N −45 N (longitudinal \u0026amp; transversal)\u003c\/td\u003e\n\u003ctd\u003eEN 12310-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoint Shear Resistance (longitudinal)\u003c\/td\u003e\n\u003ctd\u003e500 N\/50 mm ±100 N\/50 mm\u003c\/td\u003e\n\u003ctd\u003eEN 12317-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoint Shear Resistance (transversal)\u003c\/td\u003e\n\u003ctd\u003e350 N\/50 mm ±70 N\/50 mm\u003c\/td\u003e\n\u003ctd\u003eEN 12317-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Tensile Force (longitudinal)\u003c\/td\u003e\n\u003ctd\u003e600 N\/50 mm −120 N\/50 mm\u003c\/td\u003e\n\u003ctd\u003eEN 12311-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Tensile Force (transversal)\u003c\/td\u003e\n\u003ctd\u003e400 N\/50 mm −80 N\/50 mm\u003c\/td\u003e\n\u003ctd\u003eEN 12311-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at Max. Tensile Force\u003c\/td\u003e\n\u003ctd\u003e30% −15% (longitudinal \u0026amp; transversal)\u003c\/td\u003e\n\u003ctd\u003eEN 12311-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +40°C max\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003eMax. 80%\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e12 months from date of production\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eDry, +5°C to +35°C, vertical position, original packaging\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eUsage\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWaterproofing membrane for balconies and terraces under heavy protection layers (tiles or gravel)\u003c\/li\u003e\n\u003cli\u003eFlat and sloping roofs under protective layers or ballast\u003c\/li\u003e\n\u003cli\u003eCar park decks\u003c\/li\u003e\n\u003cli\u003eWet areas\u003c\/li\u003e\n\u003cli\u003eBasements and below-ground structures\u003c\/li\u003e\n\u003cli\u003eHorizontal reinforced concrete slabs, decks, podiums, and protrusions\u003c\/li\u003e\n\u003cli\u003eVertical reinforced concrete walls\u003c\/li\u003e\n\u003cli\u003eBase sheet in multi-layer waterproofing systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Not suitable for roofs permanently exposed to UV radiation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEasy to install by torching method\u003c\/li\u003e\n\u003cli\u003eFully bonded application\u003c\/li\u003e\n\u003cli\u003eFlexible in cold temperatures (≤0°C)\u003c\/li\u003e\n\u003cli\u003eGood durability and mechanical properties (tensile, tear, shear)\u003c\/li\u003e\n\u003cli\u003eCan be painted immediately after application\u003c\/li\u003e\n\u003cli\u003eInsulation panels can be bonded directly without special adhesives or mechanical fixings\u003c\/li\u003e\n\u003cli\u003eSand surface ensures excellent bond for overlying layers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePackaging\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 roll = 1.0 m wide × 10.0 m long (10 m²)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eColour\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTop surface: Sand\u003c\/li\u003e\n\u003cli\u003eBottom surface: Polyethylene film\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003eAPP modified bitumen with non-woven polyester fabric reinforcement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective Thickness\u003c\/td\u003e\n\u003ctd\u003e4.0 mm ±0.2 mm (EN 1849-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e12 months from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Conditions\u003c\/td\u003e\n\u003ctd\u003eDry, +5°C to +35°C, stored vertically, do not stack pallets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +40°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubstrate Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +40°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003eMax. 80%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide Overlap\u003c\/td\u003e\n\u003ctd\u003eMin. 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Overlap\u003c\/td\u003e\n\u003ctd\u003eMin. 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eApplication Steps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Preparation:\u003c\/strong\u003e Surface must be uniform, firm, smooth, and free from sharp protrusions, grease, laitance, oil, dust, and loose particles. Must be clean and dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePriming:\u003c\/strong\u003e Apply the appropriate Sika® primer at the required consumption onto the prepared dry surface. Allow the primer to dry completely before membrane installation. Contact Sika Technical Service for primer selection guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlignment:\u003c\/strong\u003e Unroll the membrane and align it. Re-roll before application. Lay membranes parallel to avoid coinciding joints. When applying over another bituminous membrane, straddle the overlaps of the previous layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorching:\u003c\/strong\u003e Heat the substrate and the burn-off film on the underside of the membrane with a gas burner. When the backing film starts to melt, roll the membrane forward and press firmly against the substrate. Keep the flame moving to avoid overheating (polyester reinforcement melts at +260°C). A bead of melted bitumen must be visible along the full length of all overlaps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverlaps:\u003c\/strong\u003e Overlap sides by min. 100 mm and ends by min. 150 mm. At end overlaps, cut a 100×100 mm corner at 45°. Weld overlaps until a 10 mm trickle of melted mixture is visible along the overlap line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetailing:\u003c\/strong\u003e Use a sharp knife to cut around internal\/external corners, upstands, vent pipes, drains, and support metalwork. Refer to the relevant method statement for detailing guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable Substrates for Torching:\u003c\/strong\u003e Concrete, perlite screed, bituminous membranes with smooth surface, compatible coatings, brick masonry, cementitious screeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootwear:\u003c\/strong\u003e Use flat-profile footwear only – spikes or sharp protrusions may puncture the membrane.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMaintenance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCheck the functionality of auxiliary works, flashings, drainage outlets, and overflow pipes regularly.\u003c\/li\u003e\n\u003cli\u003eRemove leaves, moss, and vegetation that could cause ponding and overload the drainage system.\u003c\/li\u003e\n\u003cli\u003eArrange periodic inspections of the membrane and detailing to maintain waterproofing performance throughout its lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":42519645257813,"sku":null,"price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sika_SikaShield_P24_S_4mm.png?v=1786762010"},{"product_id":"sikashield®-w159-ed-1-5mm","title":"Sika SikaShield W159 ED 1.5mm","description":"\u003ch2\u003eSikaShield® W159 ED 1.5mm\u003c\/h2\u003e\n\u003cp\u003eA polymer modified bituminous waterproofing membrane wet-applied to concrete using adhesive mortar SikaShield® W1. Flame-free installation makes it safe for confined spaces. Reinforced with cross-laminated PE film for high mechanical performance. Fully bonded and watertight against lateral water migration. Can be applied on wet concrete.\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width: 99.978%; height: 509.618px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003cth style=\"width: 28.911%; height: 19.6007px;\"\u003eProperty\u003c\/th\u003e\n\u003cth style=\"width: 45.0613%; height: 19.6007px;\"\u003eValue\u003c\/th\u003e\n\u003cth style=\"width: 22.8652%; height: 19.6007px;\"\u003eStandard\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 58.8021px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 58.8021px;\"\u003eType\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 58.8021px;\"\u003ePolymer modified bituminous waterproofing membrane (wet-applied)\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 58.8021px;\"\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eReinforcement\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003eCross-laminated Polyethylene (PE)\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eEffective Thickness\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003e1.5 mm ±0.15 mm\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eRoll Width\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003e1.0 m\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eRoll Length\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003e20.0 m (20 m² per roll)\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eTop \u0026amp; Bottom Surface\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003eRemovable foil liner\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2014px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 39.2014px;\"\u003eFoldability at Low Temperature\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 39.2014px;\"\u003eUnaffected at −25°C\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 39.2014px;\"\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2014px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 39.2014px;\"\u003eResistance to Static Puncture\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 39.2014px;\"\u003e240 N ±10%\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 39.2014px;\"\u003eASTM E154\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003e3 N\/mm² ±10%\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003eASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eElongation\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003e300% ±10%\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003eASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eResistance to Tear\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003e30 N ±10%\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003eASTM D624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eJoint Peel Resistance\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003e400 N\/m ±10% (at +23°C)\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003eASTM D1876\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2014px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 39.2014px;\"\u003ePermeability to Water Vapour\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 39.2014px;\"\u003e0.008 g\/m²\/24hr\/mm-Hg ±10%\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 39.2014px;\"\u003eASTM E96\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2014px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 39.2014px;\"\u003eResistance to Lateral Water Migration\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 39.2014px;\"\u003e70 m ±7 m\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 39.2014px;\"\u003eASTM D5385\/D5385M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003e+5°C min \/ +50°C max\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003eMax. 80%\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 19.6007px;\"\u003eShelf Life\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 19.6007px;\"\u003e12 months from date of production\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 19.6007px;\"\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2014px;\"\u003e\n\u003ctd style=\"width: 28.911%; height: 39.2014px;\"\u003eStorage\u003c\/td\u003e\n\u003ctd style=\"width: 45.0613%; height: 39.2014px;\"\u003eDry, +5°C to +35°C, vertical position, original packaging\u003c\/td\u003e\n\u003ctd style=\"width: 22.8652%; height: 39.2014px;\"\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eUsage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBasements and below-ground structures\u003c\/li\u003e\n\u003cli\u003eVertical reinforced concrete walls\u003c\/li\u003e\n\u003cli\u003eSingle and strip foundations\u003c\/li\u003e\n\u003cli\u003eSingle layer under heavy protection\u003c\/li\u003e\n\u003cli\u003eBase sheet in multi-layer waterproofing systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Not suitable for roofs permanently exposed to UV radiation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo-torch application – safe for confined spaces\u003c\/li\u003e\n\u003cli\u003eFully bonded system for reliable waterproofing\u003c\/li\u003e\n\u003cli\u003eWatertight against lateral water migration (70 m resistance)\u003c\/li\u003e\n\u003cli\u003eCan be applied on wet concrete\u003c\/li\u003e\n\u003cli\u003eFast and easy installation\u003c\/li\u003e\n\u003cli\u003eFlame-free application\u003c\/li\u003e\n\u003cli\u003eRequires minimal surface preparation\u003c\/li\u003e\n\u003cli\u003eHigh impact resistance (240 N static puncture)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackaging\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 roll = 1.0 m wide × 20.0 m long (20 m²)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eColour\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTop and bottom surface: Removable foil liner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003ch3\u003eProduct Information\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003ePolymer modified bitumen with cross-laminated PE reinforcement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective Thickness\u003c\/td\u003e\n\u003ctd\u003e1.5 mm ±0.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e12 months from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Conditions\u003c\/td\u003e\n\u003ctd\u003eDry, +5°C to +35°C, stored vertically, do not stack pallets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003ch3\u003eApplication Information\u003c\/h3\u003e\n\u003ctable style=\"width: 99.978%; height: 156.806px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003cth style=\"width: 43.7503%; height: 19.6007px;\"\u003eParameter\u003c\/th\u003e\n\u003cth style=\"width: 53.9762%; height: 19.6007px;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 43.7503%; height: 19.6007px;\"\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd style=\"width: 53.9762%; height: 19.6007px;\"\u003e+5°C min \/ +50°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 43.7503%; height: 19.6007px;\"\u003eSubstrate Temperature\u003c\/td\u003e\n\u003ctd style=\"width: 53.9762%; height: 19.6007px;\"\u003e+5°C min \/ +50°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 43.7503%; height: 19.6007px;\"\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd style=\"width: 53.9762%; height: 19.6007px;\"\u003eMax. 80%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 43.7503%; height: 19.6007px;\"\u003eSide Overlap\u003c\/td\u003e\n\u003ctd style=\"width: 53.9762%; height: 19.6007px;\"\u003eMin. 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 43.7503%; height: 19.6007px;\"\u003eEnd Overlap\u003c\/td\u003e\n\u003ctd style=\"width: 53.9762%; height: 19.6007px;\"\u003eMin. 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 43.7503%; height: 19.6007px;\"\u003eCuring before backfilling\u003c\/td\u003e\n\u003ctd style=\"width: 53.9762%; height: 19.6007px;\"\u003eMin. 24 hours at +25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6007px;\"\u003e\n\u003ctd style=\"width: 43.7503%; height: 19.6007px;\"\u003eBackfilling deadline\u003c\/td\u003e\n\u003ctd style=\"width: 53.9762%; height: 19.6007px;\"\u003eWithin 7 days after application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eApplication Steps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Preparation:\u003c\/strong\u003e Apply adhesive mortar SikaShield® W1 onto the water-saturated concrete substrate while still wet. Refer to the SikaShield® W1 PDS for full substrate condition requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlignment:\u003c\/strong\u003e Unroll the membrane and align it. Re-roll before application. Lay membranes parallel to avoid coinciding joints. When applying over another bituminous membrane, straddle the overlaps of the previous layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet Application:\u003c\/strong\u003e Lay the membrane directly over the wet adhesive mortar. At one end, peel away part of the release liner from the underside. Bond this end to the adhesive and substrate. Continue peeling the liner sideways while bonding the rest of the membrane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRolling:\u003c\/strong\u003e Roll the applied membrane surface with a roller from the centre to the edge to remove air bubbles. Push any excess adhesive towards the opposite direction of the sealed side overlap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverlap Sealing:\u003c\/strong\u003e If ambient temperature is below +10°C, seal membrane overlaps by heating with a gas torch or hot air to ensure proper adhesion and prevent adhesive trapping under the overlap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring \u0026amp; Backfilling:\u003c\/strong\u003e Allow adhesive mortar to cure for at least 24 hours at +25°C before backfilling. Complete backfilling within 7 days of application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetailing:\u003c\/strong\u003e Use a sharp knife to cut around internal\/external corners, upstands, vent pipes, drains, and support metalwork. Refer to the relevant method statement for detailing guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootwear:\u003c\/strong\u003e Use flat-profile footwear only – spikes or sharp protrusions may puncture the membrane.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":42519651352661,"sku":null,"price":86.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sika_SikaShield_W159_ED_1.5mm.png?v=1786761919"},{"product_id":"sika-waterbar®-o-vn","title":"PVC Waterstop O-Profile 20m Roll Sika Waterbar® O VN","description":"\u003ch2\u003eSika Waterbar® O VN\u003c\/h2\u003e\u003cp\u003eA flexible thermoplastic PVC waterstop designed to stop water migration through construction and expansion joints in concrete structures. The multi-rib profile creates impenetrable barriers and sealing begins as soon as the concrete hardens. Available in 4 widths to suit all application types. Can be easily site-welded.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFlexible thermoplastic PVC\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShore A Hardness\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;70\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength\u003c\/td\u003e\n\u003ctd\u003e12 N\/mm² (±5%)\u003c\/td\u003e\n\u003ctd\u003eASTM D412-06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation\u003c\/td\u003e\n\u003ctd\u003e300% (±5%)\u003c\/td\u003e\n\u003ctd\u003eASTM D412-06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService Temperature\u003c\/td\u003e\n\u003ctd\u003e−35°C to +55°C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemical Resistance (permanent)\u003c\/td\u003e\n\u003ctd\u003eSeawater, sewage\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemical Resistance (temporary)\u003c\/td\u003e\n\u003ctd\u003eDiluted inorganic alkalis, mineral acids, mineral oils and fuels\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e5 years from date of production\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eDry, shaded place, protected from sunlight\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSystem Sizes\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eWidth (mm) ±5mm\u003c\/th\u003e\n\u003cth\u003eRoll Length (m)\u003c\/th\u003e\n\u003cth\u003eNominal Thickness (mm) ±10%\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eO-15\u003c\/td\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e3.0–4.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eO-20\u003c\/td\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e3.0–4.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eO-25\u003c\/td\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e3.0–4.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eO-32\u003c\/td\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e3.0–8.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eUsage\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBasements and below-ground structures\u003c\/li\u003e\n\u003cli\u003eWater reservoirs and swimming pools\u003c\/li\u003e\n\u003cli\u003eSewage treatment plants\u003c\/li\u003e\n\u003cli\u003eRetaining walls and lift shafts\u003c\/li\u003e\n\u003cli\u003eTunnels, culverts, and service pits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSealing starts as soon as concrete has hardened\u003c\/li\u003e\n\u003cli\u003eMulti-rib profile provides impenetrable barriers to water migration\u003c\/li\u003e\n\u003cli\u003eCan be easily site-welded (welding knife available)\u003c\/li\u003e\n\u003cli\u003eGood chemical resistance to seawater, sewage, and diluted acids\/alkalis\u003c\/li\u003e\n\u003cli\u003eAvailable in various profiles and sizes for all application types\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePackaging\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eO-15, O-20, O-25: 20 m rolls\u003c\/li\u003e\n\u003cli\u003eO-32: 15 m rolls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eColour\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYellow flexible strip\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFlexible thermoplastic PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e5 years from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Conditions\u003c\/td\u003e\n\u003ctd\u003eDry, shaded place, protected from direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003ch3\u003eApplication Steps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositioning:\u003c\/strong\u003e Position the Sika Waterbar® O VN centrally within the construction or expansion joint, ensuring the centre bulb or ribs are correctly aligned with the joint plane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e Secure the waterstop in position using wire ties or clips to the reinforcement to prevent displacement during concrete pouring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcrete Placement:\u003c\/strong\u003e Pour and compact concrete carefully on both sides of the waterstop. Ensure full encapsulation without voids or honeycombing around the waterstop profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSite Welding:\u003c\/strong\u003e Where joints or connections are required, weld sections together using a welding knife. Ensure clean, even welds for a watertight connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection:\u003c\/strong\u003e After concrete has hardened, inspect the joint area to confirm the waterstop is correctly embedded and no voids are present.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"O-15 = 20m","offer_id":42519669899349,"sku":null,"price":128.0,"currency_code":"USD","in_stock":true},{"title":"O-20 = 20m","offer_id":42519669932117,"sku":null,"price":159.8,"currency_code":"USD","in_stock":true},{"title":"O-25 = 20m","offer_id":42519669964885,"sku":null,"price":145.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/PVC_Waterstop_O-Profile_20m_Roll_Sika_Waterbar_O_VN.png?v=1786761789"},{"product_id":"sika-waterbar®-v-vn","title":"Sika Waterbar VN","description":"\u003ch2\u003eSika Waterbar® V VN\u003c\/h2\u003e\u003cp\u003eA flexible thermoplastic PVC waterstop designed to stop water migration through construction joints in concrete structures. The multi-rib V-profile is cast centrally into stop-ends and sealing begins as soon as the concrete hardens. Pre-punched eyelets allow easy fixing to reinforcement. Can be site-welded using a Sika electric welding knife.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFlexible thermoplastic PVC (Polyvinyl Chloride)\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShore A Hardness\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;70\u003c\/td\u003e\n\u003ctd\u003eASTM D2240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength\u003c\/td\u003e\n\u003ctd\u003e12 N\/mm (±5%)\u003c\/td\u003e\n\u003ctd\u003eASTM D412-06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation\u003c\/td\u003e\n\u003ctd\u003e300% (±5%)\u003c\/td\u003e\n\u003ctd\u003eASTM D412-06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService Temperature\u003c\/td\u003e\n\u003ctd\u003e−35°C to +55°C\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemical Resistance (permanent)\u003c\/td\u003e\n\u003ctd\u003eSeawater, sewage\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemical Resistance (temporary)\u003c\/td\u003e\n\u003ctd\u003eDiluted inorganic alkalis, mineral acids, mineral oils and fuels\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e5 years from date of production\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eDry, shaded place, protected from direct sunlight\u003c\/td\u003e\n\u003ctd\u003e–\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSystem Sizes\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eWidth (mm) ±5mm\u003c\/th\u003e\n\u003cth\u003eRoll Length (m)\u003c\/th\u003e\n\u003cth\u003eNominal Thickness (mm) ±10%\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eV-15\u003c\/td\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e3.0–5.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV-20\u003c\/td\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e3.0–5.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV-25\u003c\/td\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e3.0–5.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV-32\u003c\/td\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e3.0–8.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eUsage\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWater reservoirs and swimming pools\u003c\/li\u003e\n\u003cli\u003eSewage treatment plants\u003c\/li\u003e\n\u003cli\u003eBasements and below-ground structures\u003c\/li\u003e\n\u003cli\u003eRetaining walls and lift shafts\u003c\/li\u003e\n\u003cli\u003eTunnels, culverts, and service pits\u003c\/li\u003e\n\u003cli\u003eConstruction joints and movement joints with nominal movement (e.g. basement or retaining walls)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSealing starts as soon as concrete has hardened\u003c\/li\u003e\n\u003cli\u003eMulti-rib V-profile provides impenetrable barriers to water migration\u003c\/li\u003e\n\u003cli\u003eCan be easily site-welded using Sika electric welding knife\u003c\/li\u003e\n\u003cli\u003ePre-punched eyelets for easy fixing to reinforcement with tie wires\u003c\/li\u003e\n\u003cli\u003eGood chemical resistance to seawater, sewage, and diluted acids\/alkalis\u003c\/li\u003e\n\u003cli\u003eAvailable in 4 sizes for all application types\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePackaging\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eV-15, V-20, V-25: 20 m rolls\u003c\/li\u003e\n\u003cli\u003eV-32: 15 m rolls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eColour\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eYellow flexible strip\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003ePolyvinyl Chloride (PVC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e5 years from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Conditions\u003c\/td\u003e\n\u003ctd\u003eDry, shaded place, protected from direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003ch3\u003eApplication Steps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing to Formwork:\u003c\/strong\u003e Fit the V-profile Sika Waterbar® V VN into the split formwork or shuttering for casting centrally into the stop-ends. Used for construction and movement joints where nominal movement is anticipated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing to Reinforcement:\u003c\/strong\u003e Use pre-punched eyelets in the outer flanges to fix the waterbar to steel reinforcement with tie wires, ensuring it is not displaced during concreting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacing Concrete – First Stage:\u003c\/strong\u003e Both sides must be well embedded in concrete. Vibrate carefully to avoid honeycombing. Use well-graded aggregate with concrete that is neither too plastic nor too stiff. Apply equal concrete pressure on both sides to prevent the ends from folding up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacing Concrete – Second Stage:\u003c\/strong\u003e Remove formwork carefully near the waterbar. Check the stop-end thoroughly for honeycombing and repair if necessary. Clean all hardened concrete remnants from the first stage before proceeding as per the first stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSite Welding:\u003c\/strong\u003e Use a Sika electric welding knife. Heat both ends simultaneously on the faces of the welding knife until an even molten bead of PVC appears. Withdraw the knife and immediately push the sections together. Hold rigid until the PVC cools and solidifies. Check for gaps or imperfect joints and re-weld if necessary.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"V-15 = 20m","offer_id":42519671898197,"sku":null,"price":106.2,"currency_code":"USD","in_stock":true},{"title":"V-20 = 20m","offer_id":42519671930965,"sku":null,"price":139.4,"currency_code":"USD","in_stock":true},{"title":"V-25 = 20m","offer_id":42519671963733,"sku":null,"price":200.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sika_Waterbar_VN.jpg?v=1786707826"},{"product_id":"sikagard®-703-groutseal","title":"Sikagard-703 GroutSeal","description":"\u003ch2\u003eSikagard®-703 GroutSeal\u003c\/h2\u003e\u003cp\u003eA ready-to-use, low viscosity silane\/siloxane water repellent impregnation in aqueous phase. Deeply penetrates tile joints, concrete, and building surfaces to provide strong water resistance without changing the substrate appearance. Reduces dirt pick-up and inhibits fungal and algal growth. Water-based and environmentally friendly.\u003c\/p\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eReady-to-use silane\/siloxane water repellent impregnation (aqueous emulsion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003eSilane\/siloxane combination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhitish liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.0 kg\/L at +20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH Value\u003c\/td\u003e\n\u003ctd\u003e7–10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +35°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubstrate Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +35°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRain Protection After Application\u003c\/td\u003e\n\u003ctd\u003eMin. 3 hours at +20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOvercoating (Sikagard® polymer paint)\u003c\/td\u003e\n\u003ctd\u003eWait min. 5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e12 months from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eDry, +5°C to +40°C, original sealed packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eConsumption\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSubstrate\u003c\/th\u003e\n\u003cth\u003eConsumption\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConcrete and mortar\u003c\/td\u003e\n\u003ctd\u003e0.15–0.20 kg\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorous materials\u003c\/td\u003e\n\u003ctd\u003e0.30–0.50 kg\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eUsage\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaking tile joints and building surfaces water repellent\u003c\/li\u003e\n\u003cli\u003eProtecting against water ingress through hairline cracks in tile joints and concrete\u003c\/li\u003e\n\u003cli\u003eExterior walls, roof tiles, brick, concrete, and mortar surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStrong water repellent capability in aqueous phase\u003c\/li\u003e\n\u003cli\u003eDeeply penetrates tile joints and building surfaces\u003c\/li\u003e\n\u003cli\u003eTreatment is usually invisible – does not change substrate appearance\u003c\/li\u003e\n\u003cli\u003eImproves resistance to dirt pick-up\u003c\/li\u003e\n\u003cli\u003eReduces fungal and algal growth\u003c\/li\u003e\n\u003cli\u003eCan be overcoated with suitable water or solvent-based polymer paints\u003c\/li\u003e\n\u003cli\u003eReady to use – no mixing required\u003c\/li\u003e\n\u003cli\u003eWater-based and environmentally friendly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePackaging\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e500 ml bottle\u003c\/li\u003e\n\u003cli\u003e1 L pail\u003c\/li\u003e\n\u003cli\u003e5 L pail\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eColour\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eWhitish liquid (treatment is invisible after application)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003eSilane\/siloxane combination (aqueous emulsion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e12 months from date of production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Conditions\u003c\/td\u003e\n\u003ctd\u003eDry, +5°C to +40°C, original sealed packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.0 kg\/L at +20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epH Value\u003c\/td\u003e\n\u003ctd\u003e7–10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +35°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubstrate Temperature\u003c\/td\u003e\n\u003ctd\u003e+5°C min \/ +35°C max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRain Protection\u003c\/td\u003e\n\u003ctd\u003eMin. 3 hours at +20°C after application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOvercoating (Sikagard® paint)\u003c\/td\u003e\n\u003ctd\u003eWait min. 5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo curing required\u003c\/td\u003e\n\u003ctd\u003eProduct does not require curing treatment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eApplication Steps\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Preparation:\u003c\/strong\u003e Surface must be clean, dry, and free from dust, dirt, grease, oil, and loose particles. Ensure tile joints are sound and free from old sealant residues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Apply Sikagard®-703 GroutSeal using a low-pressure spray gun, brush, or roller in a single layer from top to bottom. Take care not to let the product run or pool on the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e Protect the treated surface from rain for at least 3 hours at +20°C after application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOvercoating:\u003c\/strong\u003e Can be overcoated with water or solvent-based polymer paints – contact the paint manufacturer for compatibility details. For Sikagard® polymer paint, wait at least 5 hours before applying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning:\u003c\/strong\u003e Clean all tools and equipment with water immediately after use. Hardened or cured material can only be removed mechanically.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":42519972577365,"sku":null,"price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/files\/Sikagard-703_GroutSeal.png?v=1786706996"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/5987\/3365\/collections\/BFAF603D-AEBB-4D08-B4A7-0EC16B1990BE.jpg?v=1786457523","url":"https:\/\/esemall.com\/collections\/waterproofing.oembed","provider":"ESE Mall Construction Hub","version":"1.0","type":"link"}